Abstract:The activities aimed at reducing the safety hazard in lithium batteries have successfully considered the replacement of the conventional, volatile and flammable carbonate-based, liquid electrolytes with more stable polymer electrolytes, obtained in the form of free standing membranes. With respect to other solid polymer electrolytes, such as those based on poly(ethylene oxide), gelled polymer electrolytes (GPEs) have the great advantage of offering high conductivity, i.e. of the order of 10 −3 S cm −1 , over a wide temperature range, combined with a large electrochemical stability, i.e. extending up to 5V versus Li + /Li [1-3]. Poly(vinylidene fluoride) (PVdF)-based, gel-type membranes have been widely investigated as Li-conducting systems and prepared by conventional solvent-casting procedures [4] or electro-spinning techniques [5]. In this work we report on originally developed, PVdF-based GPEs obtained by in-situ formation of the gel matrix during cell assembly, followed by a lithium salt infiltration step [6]. Particular emphasis was devoted to the study and the optimization of the GPE composition. The substitution of the commonly used LiPF 6 salt with the fluorine free, bis(oxalato)borate (LiBOB) was investigated. A detailed thermal and dynamical mechanical characterization was adopted to elucidate the properties of the proposed systems over a wide temperature range. Vibrational spectroscopy revealed interesting molecular interactions among components, mainly. polymer and salt, strongly affecting the stability of the membranes. The electrochemical investigation confirmed high ionic conductivity, a controlled interfacial resistivity versus lithium metal and a good electrochemical stability window. The feasibility of the in-situ gelled, PVdF-based polymer electrolyte containing the LiBOB salt was demonstrated by successful galvanostatic cyclations of the quoted membrane in different lithium-ion cell configurations, obtained by coupling a Sn-C alloying anode with an high voltage spinel or a LiFePO 4 cathode. Acknowledgments The results of this work have been obtained by the financial support of the European Community within the Seventh Framework Programme APPLES (Advanced, High Performance, Polymer Lithium Batteries for Electrochemical Storage) Project (contract number 265644). References [1] F. Croce, G.B. Appetecchi, L. Persi, B. Scrosati, Nature 394 (1998) 456. [2] G.B. Appetecchi, P. Romagnoli, B. Scrosati, Electrochem. Commun. 3 (2001) 281. [3] J. Hassoun, S. Panero, P. Reale, B. Scrosati, Adv. Mater. 2 (2009) 4807. [4] J. Hassoun, P. Reale, Bruno Scrosati, J. Mater. Chem. 17 (2007) 3668. [5] F. Croce, M.L. Focarete, J. Hassoun, I. Meschinia, B. Scrosati, Energy Environ. Sci. 4 (2011) 921. [6] L. Lombardo, M. A. Navarra, S. Panero, L. Aguilera Medina, A. Matic, J. Hassoun, J. Power Sources, 245 (2014) 232.

A novel gel polymer electrolyte based on trimethylolpropane trimethylacrylate/ionic liquid via in situ thermal polymerization for lithium-ion batteries

In Situ High‐performance Gel Polymer Electrolyte with Dual‐reactive Cross‐linking for Lithium Metal Batteries

Fumed silica-doped poly(butyl methacrylate-styrene)-based gel polymer electrolyte for lithium ion battery

Novel PETEA-based grafted gel polymer electrolyte with excellent high-rate cycling performance for LiNi0.5Co0.2Mn0.3O2 lithium-ion batteries

An in-situ cross-linked network PMMA-based gel polymer electrolyte with excellent lithium storage performance

Excellent Polymerized Ionic-Liquid-Based Gel Polymer Electrolytes Enabled by Molecular Structure Design and Anion-Derived Interfacial Layer

Crosslinked Gel Polymer Electrolyte from Trimethylolpropane Triglycidyl Ether by In Situ Polymerization for Lithium-Ion Batteries

In Situ Forming Gel Polymer Electrolyte for High Energy‐Density Lithium Metal Batteries

1 μm‐Thick Robust Gel Polymer Electrolyte with Excellent Interfacial Stability for High‐Performance Li Metal Batteries

In-Situ Formed Phosphorus Modified Gel Polymer Electrolyte with Good Flame Retardancy and Cycling Stability for Rechargeable Lithium Batteries

Optimizing Li‐ion Solvation in Gel Polymer Electrolytes to Stabilize Li‐Metal Anode

Long cycling, thermal stable, dendrites free gel polymer electrolyte for flexible lithium metal batteries

Gel Polymer Electrolytes Based on an Interconnected Porous Matrix Functionalized with Poly(ethylene Glycol) Brushes Showing High Lithium Transference Numbers for High Charging-Rate Lithium Ion Batteries

A high-performance TPGDA/PETEA composite gel polymer electrolyte for lithium metal batteries

Poly (Vinylidene Fluoride-Hexafluoropropylene)–Lithium Titanium Aluminum Phosphate-Based Gel Polymer Electrolytes Synthesized by Immersion Precipitation for High-Performance Lithium Metal Batteries

Functionalized gel polymer electrolyte membrane for high performance Li metal batteries

Enhanced the interfacial compatibility by lithium anode of DOL-based in-situ polymerized gel polymer electrolytes with addition of silicon nanoparticles

Molecular engineering of a gel polymer electrolyte via in-situ polymerization for high performance lithium metal batteries

In-Situ gelled Polymer Electrolytes for Advanced Lithium Ion Batteries

Fluorine grafted gel polymer electrolyte by in situ construction for high-voltage lithium metal batteries