Abstract:Gas foil bearings have bright application prospects in oil-free turbomachinery such as aircraft air cycle machines, compressors and gas turbines. To extend the applicability of foil bearings to high-speed and heavy-load systems, the axial force produced primarily by the pressure difference between the turbine and compressor sides must be taken into consideration. The thrust disc of the rotor is typically used to sustain the axial force and maintain the attitude of the rotor in a rotor-bearing system. In an analytical model used to predict the performance of gas foil thrust bearings (GFTBs), fluid–structure interaction must be considered because of the coupling effects of hydrodynamic lubrication and the compliance of bearing surface. In this study, a link-spring structural model was employed to calculate the equivalent vertical stiffness of the bump foil. This model exhaustively considered the effect of three factors: flexibility of the bump foil, interactions between bumps, and frictional forces at the contact surfaces. In addition, top foil deflection that directly affects film thickness is calculated using a finite-element shell model. The static and dynamic characteristics of GFTBs were predicted after solving the steady-state Reynolds equation and two linearized dynamic coefficient equations which were obtained with perturbation method by using finite-difference method. The structural deformation equation was substituted into the Reynolds equations in the calculation process. The calculated static load was compared with the published experimental data, and the results validated the theoretical analysis. Thereafter, the static and dynamic characteristics including impact of rotational speed, initial minimum film thickness and the ratio of the inlet to outlet film thicknesses were analyzed. Parametric studies were also conducted to evaluate the effect of different structural parameters of the bump foil and journal tilting on the static characteristics of GFTBs. Because the proposed analytical model is completely algebraic, it can be easily programmed for accurately and effectively investigating the performance of GFTBs.

Investigations on Bearing Performances of Metal Rubber-Bump Foil Gas Journal Bearing with Three Structure Pads Integrating Stiffness and Damping

An Efficient Three-Dimensional Foil Structure Model for Bump-Type Gas Foil Bearings Considering Friction

Effects of Structure Parameters on Static Performance of Gas Foil Bearings Based on a New Fully Coupled Elastic–Aerodynamic Model

Numerical and Compact Model of Metal Mesh Foil Bearings

The Influences of Parameters on the Dynamic Characteristics of a Multi-Foil Aerodynamic Journal Bearing with Bump-Backing Foils: Model Predictions

Parameter Effects on the Static Characteristics of the Multi-Foil Aerodynamic Journal Bearing with Bump-Backing Foils

Study of load carrying mechanism of a novel three-pad gas foil bearing with multiple sliding beams

Hysteresis Behaviors of a Bump-Type Foil Bearing Structure with Amended LuGre Friction Model

Numerical Investigation of Bump Foil Configurations Effect on Gas Foil Thrust Bearing Performance Based on a Thermos-Elastic-Hydrodynamic Model

Energy Dissipation Characteristics And Dynamic Modeling Of The Coated Damping Structure For Metal Rubber Of Bellows

Numerical and experimental investigation on dynamic performance of bump foil journal bearing based on journal orbit

Theoretical and experimental research on static stiffness, performance, and lift-off characteristics of multi-layer gas foil thrust bearings

Parametric study on static and dynamic characteristics of bump-type gas foil thrust bearing for oil-free turbomachinery

Development and performance research of a new-type air foil bearing with combined bump foils

Modeling and Stability Characteristics of Bump-Type Gas Foil Bearing Rotor Systems Considering Stick–slip Friction

Experimental evaluation of tribo-performances of bump foil journal bearing with different materials of foil

Novel Aerostatic Bearings with Hermetically Squeeze Film Dampers for the Improvement of Stability: Theoretical and Experimental Investigations

Effects of bearing clearance and supporting stiffness on performances of rotor-bearing system with multi-decked protuberant gas foil journal bearing

A nonlinear model for dynamic performance analysis of gas foil bearing-rotor system considering frictional contacts

Multi-layered Solid Element for Seismic Analysis of Rubber Bearings Considering Stress Continuity Based on Finite Particle Method

Numerical and experimental investigation on the performance of hybrid porous gas journal bearings