Abstract:The dynamic behaviors of gas foil bearing-rotor system are greatly affected by the damping resulting from friction inside foil structure. However, challenges exist in theoretical study when introducing the friction into the dynamic system. This paper presents an effective nonlinear model considering frictional contacts to study the dynamic performance of foil bearing-rotor system. The top foil and bump foil are modeled with the beam elements to consider the sagging effect and bump interactions. Instead of treating the structural damping caused by friction as equivalent viscous damping, the friction force is calculated by utilizing a regularization technique to capture its nonlinear behavior. The simulations are numerically implemented using a direct implicit integration scheme with consideration of unsteady hydrodynamic pressure, rotor motion, deflection of foil structure and their coupling relationships. Using this model, the dissipative characteristics and stability of foil bearing-rotor system are investigated. The results show that the friction leads to hysteretic loops and energy dissipation, and the stick motion becomes more prevalent with the increasing friction coefficient. The dynamic system exhibits rich and complicated nonlinear behaviors. With the change of system parameters, the rotor can experience periodic, quasi-periodic and multi-periodic motions. Only synchronous vibration occurs at low rotational speeds, but large-amplitude subsynchronous vibrations are dominant when rotational speed exceeds the onset speed of instability. Increasing the nominal clearance contributes to avoid the appearance of subsynchronous vibrations, resulting in a more stable system. The predictions can provide guidance for determining the operating and design parameters of foil bearing-rotor system in practice.

A nonlinear model for dynamic performance analysis of gas foil bearing-rotor system considering frictional contacts

Modeling a Two-Span Rotor System Based on the Hamilton Principle and Rotor Dynamic Behavior Analysis

Modeling and Stability Characteristics of Bump-Type Gas Foil Bearing Rotor Systems Considering Stick–slip Friction

Frictional Analysis on Stiffness and Damping Characteristics of Bump Foil Gas Bearings

Linear Stability and Nonlinear Rotor Responses of the Gas Foil Bearing with Multiple Sliding Beams

Effect of Bump Structural Friction on the Performance of Bump Foil Bearing and Rotor Dynamic Behavior: Experimental Study

Static Performance of Gas Foil Bearings with Nonlinear Foil Stiffness Model

Numerical investigation on the rotordynamics of a high-speed air compressor supported by gas foil bearings

Prediction of Static Characteristics of Hydrodynamic Air Foil Bearing Considering Contact and Friction Between Foils

Nonlinear dynamic of flexible rotor supported by turbulent bearings with quadratic damping and temperature dependent viscosity

Coupled Bending and Torsional Vibration of a Rotor System with Nonlinear Friction

A Fully Coupled Elastohydrodynamic Model for Static Performance Analysis of Gas Foil Bearings

A Review on the Dynamic Performance Studies of Gas Foil Bearings

Dynamic Analysis of High Speed Turbine Rotor with Foil Bearing

Simulation and Experimental Verification of Dynamic Characteristics on Gas Foil Thrust Bearings Based on Multi-Physics Three-Dimensional Computer Aided Engineering Methods

The Effect of Coulomb Friction in Foil Structure on the Static and Dynamic Performance of Bump Foil Journal Bearings

A Novel Method for Calculating the Dynamic Force Coefficients of Gas Foil Bearings and Its Application in the Rotordynamic Analysis

Numerical Investigation of Bump Foil Configurations Effect on Gas Foil Thrust Bearing Performance Based on a Thermos-Elastic-Hydrodynamic Model

A Generalized Solution of Elasto-Aerodynamic Lubrication for Aerodynamic Compliant Foil Bearings

Investigations on the Frictional Hysteresis Effect of Multi-Leaf Journal Foil Bearing: Modeling, Predictions and Validations

Nonlinear Dynamic Analysis of Rub-Impact Rod-Fastening Combined Rotor Systems with Internal Damping