Abstract:Conventional rolled Mg-Al alloy sheets typically exhibit strong basal textures that remain and may even strengthen after recrystallization annealing due to the preferential growth of basal-oriented grains, resulting in poor formability at room temperature. Therefore, the knowledge of recrystallization and grain growth is critical for modifying textures of Mg-Al alloy sheets. The static recrystallization and texture evolution in a cold-rolled dilute Mg-1Al (wt.%) alloy during various annealed temperatures ranging from 300 °C to 450 °C, have been investigated using the quasi in-situ electron backscatter diffraction (EBSD) method. The as-rolled Mg-1Al alloy shows a dominant basal texture, which weakens and broadens in the rolling direction (RD) during the subsequent annealing, accompanied by the formation of 〈101¯0〉 texture component. Particularly, the 〈101¯0〉 texture component is more pronounced after annealing at high temperatures. The quasi in-situ EBSD results show that recrystallized grains are mainly induced by shear bands, which exhibit a wide spectrum of orientations with c-axis tilt angles ranging 20°-45° from the normal direction (ND). Orientations of shear band-induced recrystallized grains are retained during the entire recrystallization process, resulting in a reduction in the texture intensity. Moreover, recrystallized grains belonging to the 〈101¯0〉 texture component grow preferentially compared to those with other orientations, which is attributed to low energy grain boundaries, especially grain boundaries with ∼30° misorientation angles. Furthermore, the high temperature annealing facilitates the rapid growth of grain boundaries having a 30° misorientation angle, leading to the occurrence of distinct 〈101¯0〉 texture after annealing at 450 °C for 1 h. The results provide insights for texture modification of rare earth-free low-alloyed Mg alloys by controlling annealing parameters.

Anisotropic Segregation-Driven Texture Weakening in a Dilute Mg-Al-Ca Alloy During Isothermal Annealing

Unexpected texture transition induced by grain growth during static annealing of a dilute Mg-1Al alloy

Texture Selection Mechanisms During Recrystallization and Grain Growth of a Magnesium-Erbium-Zinc Alloy

Texture Evolution During Static Recrystallization of Cold-Rolled Magnesium Alloys

Understanding the mechanisms of texture evolution in an Mg-2Zn-1Ca alloy during cold rolling and annealing

Quasi-in-situ Observing the Rare Earth Texture Evolution in an Extruded Mg-Zn-Gd Alloy with Bimodal Microstructure

Insights into the evolution of texture and mechanical properties during warm rolling and annealing of Mg–2Zn-0.5Ca alloy

Study on the Evolution Pattern of Grain Orientation and Misorientation During the Static Recrystallization of Cold-Rolled Mg-Zn-Gd Alloy

Coupling Thermomechanical Processing and Alloy Design to Improve Textures in Mg-Zn-Ca Sheet Alloys

Achieving High Ductility and Low In-Plane Anisotropy in Magnesium Alloy Through a Novel Texture Design Strategy

The Preferential Growth and Related Textural Evolution During Static Recrystallization in a Cold-Rolled Mg–Zn–Gd Alloy

Oriented Nucleation Causing Unusual Texture Transition During Static Recrystallization Annealing in Cold-Rolled Mg–Zn–Gd Alloys

Unusual Twin Induced Recrystallization and Corresponding Texture Optimization in a Cold Rolled Mg-Gd-Zr Alloy During Annealing

Twinning-Assisted Static Recrystallization and Texture Evolution in A Mg-Gd-Y-Zr Alloy

Unveiling Annealing Texture Formation and Static Recrystallization Kinetics of Hot-Rolled Mg-Al-Zn-Mn-Ca Alloy

Strain Path Dependence of Texture and Property Evolutions on Rolled Mg-Li-Al-Zn Alloy Possessed of an Asymmetric Texture

On the role of selective nucleation and growth to recrystallization texture development in a Mg-Gd-Zn alloy

Twinning-mediated Texture Weakening in a Basal-Textured Mg-6Al-1Zn (mass%) Alloy Sheet by a Novel Cold-Sample Rolling Method

Quasi-in-situ Observations of Low-Angle Grain Boundaries, Twins and Texture Evolution During Continuous Annealing in a Cold-Rolled Mg-Zn-Gd Alloy

Texture property and weakening mechanism of Mg-3Al-1Zn alloy by interactive alternating forward extrusion

Texture Evolution During Cold Rolling of Dilute Mg Alloys