Abstract:The development of Mg-Al-Zn-Mn-Ca series alloys provides a potential prospect to achieve high strength and formability at room temperature (RT). The formation of elliptical annular texture is treated as a crucial factor for the enhanced RT formability. However, the origin of such an elliptical annular texture formation has been rarely reported. Herein, we unveiled the formation and evolution of elliptical annular texture in the hot-rolled Mg-1.6Al-0.8Zn-0.4Mn-0.5Ca (AZMX1100, wt.%) alloy after annealing at different temperatures for 1 h, and its static recrystallization (SRX) kinetics in given annealing temperature for different time. The results revealed that the formation of elliptical annular texture in the hot-rolled AZMX1100 alloy after annealing was derived from nucleation-oriented SRX mechanism, which took place in 200-300 degrees C, induced by cracked chain-shaped Al2Ca phases, contraction twins, intersections of double twins, intersections of double twins and grain boundaries and non-basal slips. On further annealing from 300-450 degrees C, the grains with 45 degrees -70 degrees transverse direction (TD) preferentially grew, which made elliptical annular texture extended along the TD. Based on the Johnson-Mehl-Avrami-Kolmogorov (JMAK) model, Avrami exponent n value was estimated to be 0.68-1.02, attributed to non-random SRX nucleation, giving rise to the lower activation energy Q(R) of nucleation of similar to 74.24 kJ/mol. Since the co-segregation of Al, Zn and Ca atoms in grain boundaries created a strong interaction of solutes and grain boundaries, the hot-rolled AZMX1100 alloy exhibited the higher activation energy Q(g) (similar to 115.48 kJ/mol) of grain growth. (C) 2020 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.

Coupling Thermomechanical Processing and Alloy Design to Improve Textures in Mg-Zn-Ca Sheet Alloys

Effects of Zn Addition and Twin Roll Casting Process on the Microstructure, Texture, and Mechanical Properties of the Mg-Al-Mn-Ca Sheet

Texture Selection Mechanisms During Recrystallization and Grain Growth of a Magnesium-Erbium-Zinc Alloy

Effect of Calcium Addition on Microstructure and Texture Modification of Mg Rolled Sheets

The Role of Recrystallization and Grain Growth in Optimizing the Sheet Texture of Magnesium Alloys with Calcium Addition During Annealing

Insights into the evolution of texture and mechanical properties during warm rolling and annealing of Mg–2Zn-0.5Ca alloy

Development of Weak-Textured and High-Performance Mg–Zn–Ca Alloy Sheets Based on Zn Content Optimization

Texture Evolution During Cold Rolling of Dilute Mg Alloys

Microstructure and Texture Evolution of the Magnesium Alloy ZMX210 during Rolling and Annealing

Microstructure evolution and mechanical property of Mg-3Al alloys with addition of Ca and Gd during rolling and annealing process

Hot deformation behavior of novel high-strength Mg-0.6Mn-0.5Al-0.5Zn-0.4Ca alloy

Nucleation of Recrystallization in Magnesium Alloy Grains of Varied Orientation and the Impacts on Texture Evolution

Influence of Texture on the Mechanical Properties of a Mg-6Al-1Zn-0.9Sn Alloy Processed by ECAP

Unveiling Annealing Texture Formation and Static Recrystallization Kinetics of Hot-Rolled Mg-Al-Zn-Mn-Ca Alloy

Anisotropic Segregation-Driven Texture Weakening in a Dilute Mg-Al-Ca Alloy During Isothermal Annealing

Twinning-mediated Texture Weakening in a Basal-Textured Mg-6Al-1Zn (mass%) Alloy Sheet by a Novel Cold-Sample Rolling Method

Effects of deformation parameters on microstructure and texture of Mg–Zn–Ce alloy

Effects of Zn addition on the mechanical properties and texture of extruded Mg-Zn-Ca-Ce magnesium alloy sheets

Achieving High Ductility in Hot-Rolled Mg-xZn-0.2Ca-0.2Ce Sheet by Zn Addition

The Role of Ca on the Microstructure and Tensile Properties of Mg-Al-Zn-Ca Alloys

Synergization of Ductility and Yield Strength in a Dilute Quaternary Mg-Zn-Gd-Ca Alloy Through Texture Modification and Guinier–Preston Zone