Abstract:This work investigates the possibility of using LaMn0.7Fe0.3O3.15@mSiO(2) as oxygen carriers for chemical looping combustion (CLC). CLC is a new combustion technique with inherent separation of CO, from atmospheric N-2. LaMn0.7Fe0.3O3.15@mSiO(2) core shell materials were prepared by coating a layer of mesostructured silica around the agglomerated perovskite particles. The oxygen carriers were characterized using different methods, such as X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), N-2 sorption, hydrogen temperature-programmed reduction (H-2-TPR), and temperature-programmed desorption of oxygen (TPD-O-2). The reactivity and stability of the carrier materials were tested in a special reactor, allowing for short contact time between the fluidized carrier and the reactive gas [Chemical Reactor Engineering Centre (CREC) fluidized riser simulator]. Multiple reduction oxidation cycles were performed. TEM images of the carriers showed that a perfect mesoporous silica layer was formed around samples with 4, 32, and 55 nm in thickness. The oxygen carriers having a core shell structure showed higher reactivity and stability during 10 repeated redox cycles compared to the LaMn0.7Fe0.3O3.15 core. This could be due to a protective role of the silica shell against sintering of the particles during repeated cycles under CLC conditions. The agglomeration of the particles, which occurred at high temperatures during CLC cycles, is more controllable in the core shell-structured carriers, as confirmed by SEM images. XRD patterns confirmed that the crystal structure of all perovskites remained unchanged after multiple redox cycles. Methane conversion and partial conversion to CO, were observed to increase with the contact time between methane and the carrier. Indeed, more oxygen from the carrier surface, grain boundaries, and even from the bulk lattice was released to react with methane. Upon rising the contact time, less CO was formed, which is desirable for CLC application. Increasing the reaction temperature and methane partial pressure lead to enhanced conversions of CH4 under CLC conditions.

Oxygen Release and Reduction Kinetics of La0.35Sr0.35Ba0.3Fe1-xCoxO3 As Oxygen Carriers for Chemical Looping Dry Reforming of Methane

Highly Active La0.35Sr0.35Ba0.3Fe1-xCoxO3 Oxygen Carriers with the Anchored Nanoparticles for Chemical Looping Dry Reforming of Methane

Effect of Ba content on chemical looping dry reforming of methane performance of(La0.5Sr0.5)1-xBaxFe0.6Co0.4O3

High-reactive and Coke-Resistant Polyhedral NiO/Fe2O3 Oxygen Carrier for Enhancing Chemical Looping CH4–CO2 Dry Reforming

LaFe0.8Co0.15Cu0.05O3 Supported on Silicalite-1 as a Durable Oxygen Carrier for Chemical Looping Reforming of CH4 Coupled with CO2 Reduction

Enhanced Activity of La1-xMnCuxO3 Perovskite Oxides for Chemical Looping Steam Methane Reforming

Rational design and reduction kinetics of efficient Ce-Co oxygen carriers for chemical looping reforming of methane

PERFORMANCE STUDY OF LaFe1-xCoxO3 AS OXYGEN CARRIERS IN CHEMICAL-LOOPING COMBUSTION REACTION

Reversible Exsolution of Iron from Perovskites for Highly Selective Syngas Production Via Chemical Looping Dry Reforming of Methane

Development of Sinter-Resistant Core–Shell LaMnxFe1–xO3@mSiO2 Oxygen Carriers for Chemical Looping Combustion

Enhanced Resistance to Carbon Deposition over LaxCe1–xFexNi1–xO3 Oxygen Carrier for Chemical Looping Reforming

Enhanced lattice oxygen reactivity over Fe2O3/Al2O3 redox catalyst for chemical-looping dry (CO2) reforming of CH4: Synergistic La-Ce effect

Lattice Oxygen Modulation for Efficient Chemical Looping Redox Oxidative Cracking of Cycloalkane to Light Olefins: the Influence of the Active Sites Configuration

Crystalline phase transformation of Sr-Fe based oxygen carriers modulate the cyclic performance for syngas and CO coproduction in chemical looping ethanol reforming coupled with CO 2 splitting

Polymetallic doping of Mn-based perovskite oxides for chemical looping dry reforming of methane

Cerium Oxide Promoted Iron-based Oxygen Carrier for Chemical Looping Combustion

Co-production of syngas and H2 from chemical looping steam reforming of methane over anti-coking CeO2/La0.9Sr0.1Fe1−xNixO3 composite oxides

Attempts of B-site Doped LaFeO3 Oxygen Carriers in High-Moisture Content Biomass Chemical Looping Gasification

Effect of Nickel and Cobalt Doping on the Redox Performance of SrFeO3−δ Toward Chemical Looping Dry Reforming of Methane

Reduction Kinetics of SrFeO3−δ/CaO·MnO Nanocomposite As Effective Oxygen Carrier for Chemical Looping Partial Oxidation of Methane

Achieving surface and bulk rate matching for chemical looping partial oxidation of methane by modulating oxygen transport