Attempts of B-site Doped LaFeO3 Oxygen Carriers in High-Moisture Content Biomass Chemical Looping Gasification

Zhiyu Li,Jian Li,Zhi Wang,Xiaochao Zhu,Beibei Yan,Guanyi Chen,Juan Zhao

DOI: https://doi.org/10.1016/j.cej.2024.150463

IF: 15.1

2024-01-01

Chemical Engineering Journal

Abstract:With the rapid development of anaerobic digestion engineering, the disposal and utilization of digestate are urgently required. Chemical looping gasification (CLG) technology provides potential for eliminate digestate and convert it into high-quality syngas. However, the application of conventional CLG is hindered by the highmoisture content of digestate. In order to decrease the energy consumption of dehydration, this work aims to optimize the CLG process by developing new oxygen carrier (OC) to enhance the transition of self-moisture of digestate. LaFeO 3 was employed as the basic OC and Cr, Co, Cu were further doped on the B-site to form LaB 0.5 Fe 0.5 O 3 (B = Cr, Co, Cu). H 2 O-TPD, OH/FTIR, NH 3 -Drifts, Raman, and XPS were employed to analyze the adsorption and dissociation of H 2 O by different OCs. Results indicated that LaFeO 3 and LaB 0.5 Fe 0.5 O 3 exhibited a synergistic effect with H 2 O, enabling adsorption of H 2 O at low temperatures and dissociation at high temperatures. In this case, it allows OC to capture H 2 O in the initial drying stage, then release H 2 O and OH at higher temperatures to participate in subsequent reactions, thus significantly increase the gasification performance. Fixed-bed CLG experiments were conducted to corroborate the characterization results. LaCu 0.5 Fe 0.5 O 3 showcased the best gasification effect, achieving 81.83 % efficiency at a digestate moisture content of 40 %, surpassing LaFeO 3 CLG by 5 %. Moreover, LaCu 0.5 Fe 0.5 O 3 exhibited a noticeable catalytic effect and lowered the activation energy ( E ). Kinetic analysis revealed a 16 % reduction in E for LaCu 0.5 Fe 0.5 O 3 CLG in comparison to LaFeO 3 CLG.