Abstract:CO 2 and methane are the first and second most important greenhouse gases (GHGs). Solar thermal chemical looping dry reforming of methane (STCL-DRM) is a promising route to reduce methane/CO 2 emissions and achieve solar-to-chemical production. However, the lack of suitable oxygen carrier (OC) catalysts impedes the development. In this study, the tailored lanthanum-based perovskite by Cu and Ni substitution was synthesized as the OC catalyst. In the partial oxidation of methane, the tailored perovskite LaCu 0.5 Ni 0.5 O 3 can be reduced at the temperature of 450 °C–750 °C, and later the consumed lattice oxygen was supplemented through CO 2 reduction. Based on the DFT calculations, LaCu 0.5 Ni 0.5 O 3 exhibited a lower oxygen vacancy formation energy of 0.78 eV and a lower energy barrier of 0.32 eV for the oxygen migration from the second to the first layer. Compared to the undoped lanthanum-nickel perovskite and ceria, LaCu 0.5 Ni 0.5 O 3 shows superior oxygen migration ability. The enhanced oxygen migration and synergistic effect of Cu and Ni substitution were identified and unveiled through thermodynamic and computational study. The fixed-bed reactor tests yielded outstanding results with methane conversion >83 %, CO selectivity >97 %, and near-complete CO 2 conversion at 650 °C. Furthermore, we evaluated two pathways, STCL-DRM using LaCu 0.5 Ni 0.5 O 3 and traditional steam methane reforming (SMR), for methanol/acetic acid production. The proposed STCL-DRM process using LaCu 0.5 Ni 0.5 O 3 demonstrated ∼86 % reduction in energy demand compared to SMR while enabling negative CO 2 production. This process showed a carbon efficiency of roughly 81.9 %, which was 5 % higher than traditional SMR. These results show that the STCL-DRM can provide a competitive route for realizing solar thermochemical CO 2 reduction, clean conversion of methane, and efficient solar-to-chemical production.

Polymetallic doping of Mn-based perovskite oxides for chemical looping dry reforming of methane

Co-production of syngas and H2 from chemical looping steam reforming of methane over anti-coking CeO2/La0.9Sr0.1Fe1−xNixO3 composite oxides

Chemical looping steam reforming of methane over Ce-doped perovskites

Halite-Structured (MgCoNiMnFe)O x High Entropy Oxide (HEO) for Chemical Looping Dry Reforming of Methane

Enhanced oxygen migration in tailored lanthanum-based perovskite for solar-driven dry reforming of methane

Lattice oxygen behaviors of Mn-based catalytic oxygen carriers and sustainable oxidative coupling of methane in chemical-looping scheme

Alkali-metal enhanced LaMnO3 perovskite oxides for chemical looping oxidative dehydrogenation of ethane

Halite-Structured (mgconimnfe)o High Entropy Oxide (HEO) for Chemical Looping Dry Reforming of Methane

Heteroatom-doping regulated Mg6MnO8 for improving C2+ hydrocarbons during chemical looping oxidative coupling of methane

Mg-doped La1.6Sr0.4FeCoO6 for anaerobic oxidative dehydrogenation of ethane using surface-absorbed oxygen with tuned electronic structure

Dopant-Enhanced harmonization of α-Fe 2 O 3 oxygen migration and surface catalytic reactions during chemical looping reforming of methane

Enhanced performance of chemical looping combustion of methane by combining oxygen carriers via optimizing the stacking sequences

NiO/κ-CeZrO4 functional oxygen carriers with Niδ+ and oxygen vacancy synergy for chemical looping partial oxidation reforming of methane

Engineering Highly Selective CO2 Electroreduction in Cu-based Perovskites through A-site Cation Manipulation

Tuning the Phase Transition of SrFeO3-δ by Mn toward Enhanced Catalytic Activity and CO2 Resistance for the Oxygen Reduction Reaction

Achieving surface and bulk rate matching for chemical looping partial oxidation of methane by modulating oxygen transport

Dry reforming of methane by La 2 NiO 4 perovskite oxide: B-site substitution improving reactivity and stability

Enhanced C2+ Selectivity in Plasma-assisted Chemical Looping Oxidative Coupling of Methane using (Na, Li, and K) doped LaMnO3

Lattice Oxygen Regulation of Perovskites for Chemical Looping Oxidative Dehydrogenation of Ethylbenzene to Styrene

Biomass based oxygenates modified Fe-Mn oxide with improved surface lattice oxygen mobility for the chemical looping-oxidative dehydrogenation of ethane to ethylene

Uniformly dispersed NiFeAlO 4 as oxygen carrier for chemical looping steam methane reforming to produce syngas