Abstract:Metal Matrix Composite (MMC) represents a valuable option as structural material for different type of structures and components. Despite this they struggle to become widely adopted due to expensive manufacturing process and complex microstructural behaviour. When subjected to cyclic load conditions the structural response of MMC is not trivial, and becomes even more difficult when high temperature load is involved. Different failure mechanisms would happen and they are originated by the different material properties between the fibre and surrounding matrix. Among all, the mismatch of thermal expansion coefficient is recognized to be the dominant one. The significantly differing coefficients of thermal expansion between ceramic and metal give rise to micro thermal stresses, which enhance the initiation of matrix micro cracks. Their performance under varying load and high temperature is complex, and hence it is difficult to have a clear understanding of the structural responses, especially when fatigue and creep damages become the main failures of MMCs. To improve current understanding of the relationship between creep fatigue interaction of MMCs, the history of thermal and mechanical loading, and the creep dwell period, a highly accurate but robust direct simulation technique on the basis of the Linear Matching Method (LMM) framework has been proposed in this paper, and been applied to model the fatigue and creep behaviour of MMCs. A homogenised FE model is considered in all analyses, which consist of continuous silicon carbide fibres embedded in a square 2024T3 aluminium alloy matrix array. Various factors that affect creep and fatigue behaviours of composites are analysed and discussed, including effects of the applied load level, dwell period and temperature on the MMC's performance. The effects of reversed plasticity on stress relaxation and creep deformation of MMC are investigated, and the behaviours of cyclically enhanced creep and elastic follow-up are presented. A detailed study of the creep ratchetting mechanism is also performed with the concentration on the impact of temperature and different loading conditions. The accuracy of the proposed method has been verified by detailed incremental finite element analyses using the commercial finite element solver Abaqus. Such verifications further improve the understanding of the failure mechanisms identified and discussed in this work.

Investigation of Thermal Creep in Metal-Based MEMS Cantilevers

Modeling and Measurement of Thermal–Mechanical-Stress-Creep Effect for RF MEMS Switch Up to 200 °C

Generalized-Accumulated-Temperature Parameter for Characteristic Prediction of Metal-Based Mems Cantilever

Prestressing-Based Thermal Budget Study of MEMS Cantilever and Its Application in Package Processes

Thermomechanical and Creep Behaviors of Multilayered Metallization Systems Developed for High‐Temperature Surface Acoustic Wave Sensors

On the Creep Fatigue Behavior of Metal Matrix Composites

Study of creep deformation of metal materials with moire interferometry

Creep behavior of intermetallic compounds at elevated temperatures and its effect on fatigue life evaluation of Cu pillar bumps

Mechanical characterization of biocompatible thin film materials by scanning along micro-machined cantilevers for micro-/nano-system

In situ high temperature creep deformation of micro-structure with metal film wire on flexible membrane using geometric phase analysis.

Recent Efforts in Modelling Combined Rate, Size and Thermal Effects on Single Crystal Strength

Structural Optimization and Mechanical Simulation of MEMS Thin-Film Getter–Heater Unit

The Analysis of Temperature Effect and Temperature Compensation of Moems Accelerometer Based on A Grating Interferometric Cavity

Creep-fatigue Behaviour of Aluminum Alloy-Based Metal Matrix Composite

Thermal properties analysis of MEMS sensors by micro-grid method

Fabrication and Fatigue Testing of an Electrostatically Driven Microcantilever Beam

Variation of MEMS Thin Film Device Parameters under the Influence of Thermal Stresses

Mems/Nems Mechanical Characterization on Different Thin - Film Materials by Scanning along Micro-Machined Cantilevers

Coupling Effect of Strain Gradient Strengthening and Thermal Softening on the Microscale Plastic Behavior of Metallic Materials

Fabrication and Characterization of a Polymer/Metal Bimorph Microcantilever for Ultrasensitive Thermal Sensing

Steady-state creep of metal-ceramic multilayered materials