Abstract:Low-temperature-initiated cracking technology has significant potential to develop new hydrocarbon pyrolysis with better atomic economy and higher yields of light olefins. The impacts of three representative initiators, triethylamine (TEA), nitromethane (NM), and di-tert-butyl peroxide (DTBP), were compared. Sufficiently detailed co-cracking reaction networks of three initiators with n-hexane were obtained through an automatic reaction network generator RMG, and the corresponding steam cracking tubular reactor simulation was performed. The results showed that the initiator with a lower cracking temperature brought about a more noticeable decrease in the cracking temperature of n-hexane. Both TEA and NM increased the carbon atom conversion from n-hexane to ethylene and propylene, especially propylene. NM was more significant, while DTBP was almost ineffective. Through kinetic parameter analysis, it was found that the temperature dependence of the key reaction caused different initiator performance. NM completely cracked at an appropriate temperature where the rate constants of the hydrogen abstraction and ethylene generation had reached a high level, and the released free radicals were effective. Visual reaction network analysis revealed that NM had a strong ability to release free radicals, and these free radicals significantly adjusted the competitive reaction path to produce ethylene and propylene, resulting in the most obvious effect on improving the conversion of n-hexane and the yield of propylene. The action laws of NM described above under hydrocarbon pyrolysis conditions indicate that NM may be the most suitable initiator for low-temperature-initiated cracking of hydrocarbons among these three initiator types.

Improvement of Residue by Hydrocracking with Solid Acid,solid Base and Radical Initiators

Low-Temperature-Initiated Cracking of Hydrocarbons to Produce Olefins: Simulation and Comparison of Different Initiators

On the Mechanism of Initiation Steam Cracking of C6 Hydrocarbons by Hyperbranched Poly(amidoamine) (PAMAM) Initiator

Synergism of Hydrogen Donors and Dispersed Catalysts on Conversion of Different Residues

IMPACT OF ADDITIONAL CATALYSTS ON NITROGEN DISTRIBUTION IN RESIDUE OIL SLURRY-BED HYDROCRACKING

Study on the Effect of Catalyst Properties on Residue Hydroconversion

Synergism Between Hydrogen Donors and Dispersed Catalysts in Hydrocracking of Residue

Effect of Hydrogen Donor and Precursor of Donor on Catalytic Hydro-Cracking Reaction of Residue Oil

An Improvement of MCM-41 Supported Phosphoric Acid Catalyst for Alkylation Desulfurization of Fluid Catalytic Cracking Gasoline

Effect of Free Radical Initiators on the Hydrocracking of Heavy Oils

Influence of Acid Additives on Catalytic Cracking of Model Compounds System Containing Nitrogen

Zeolite domination in coordination between metal and acid sites on an industrial catalyst for tetralin hydrocracking

Effect of Catalyst on Distribution of Nitrogen in Products from Residue Hydrocracking

Residue Upgrading in Slurry Phase over Ultra-fine NiMo/gamma-Al2O3 Catalyst

DEVELOPMENT AND COMMERCIAL APPLICATION OF KEY TECHNOLOGY FOR EFFICIENT CONVERSION OF HEAVY OIL

Effect of Zeolite-Y Modification on Crude-Oil Direct Hydrocracking

A NEW INTEGRATION PROCESS OF RESIDUE HYDROTREATING COMBINED WITH CATALYTIC CRACKING

High Metal–Acid Balance and Selective Hydrogenation Activity Catalysts for Hydrocracking of 1-Methylnaphthalene to Benzene, Toluene, and Xylene

Coke and radicals formation on a sulfided NiMo/γ-Al2O3 catalyst during hydroprocessing of an atmospheric residue in hydrogen donor media

Enhanced hydroconversion of polyethylene via dual-functional catalysis: Exploiting ZSM-22 pore-mouth catalysis and Ru electronic effect

Effects of hydrogen donor and dispersed catalysts on thermal cracking and hydrocracking of Liaohe residue