Abstract:Bifunctional initiators with two labile groups ( e g peroxides or azo groups) are frequently used in the polymer industry for the synthesis of vinyl polymers and resin curing In general, there are two types of bifunctional initiators: one is symmetrical bifunctional initiators containing two labile groups of equal structure, the other is unsymmetrical bifunctional initiators containing two labile groups of unequal structure One of the potential advantages of using bifunctional initiators is that high polymer molecular mass and high polymerization rate can be obtained simultaneously by controlling the initiator decomposition rate through optimal reaction temperature programming For free radical polymerization of methyl methacrylate (MMA) with monofunctional initiators, the kinetics is reasonably well understood in both low and high monomer conversion regimes However, the presence of an additional labile group in bifunctional initiators makes the polymerization kinetics very complicated. This is because labile groups such as peroxides become redistributed repeatedly in the growing and inactive polymers and they are engaged in further initiation, propagation, chain transfer and termination reactions during the course of polymerization. The effects of temperature and initiator concentration on the kinetics of MMA bulk polymerization initiated by 2,5 dimethyl 2,5 bis(2 ethyl hexanoyl peroxide) hexane (TX 141) were investigated.The energy of activation of MMA bulk polymerization initiated by TX 141 was about 91 kJ·mol -1 , and that of TX 141 decomposition was about 140 kJ·mol -1 , which was more close to the experimental data.The reaction order of TX 141 concentration was about 0 72,because there was mono and bi molecule termination. The kinetic comparison initiated by TX 141 and benzoyl peroxide (BPO) with the same half life period showed that the kinetics was the same when the concentration of TX 141 was half of that of BPO.But, the number average molecular mass ratio of that initiated by TX 141 to that by BPO was from 1 2 to 1 33 increasing with the conversion.There was an exothermal peak in the DSC curve of polymer initiated by TX 141 at low conversion, but there was no peak at high conversion and no peak was observed for the polymer initiated by BPO.It was shown that the two functional groups of bifunctional initiator decomposed at different times during the polymerization process.

On the Mechanism of Initiation Steam Cracking of C6 Hydrocarbons by Hyperbranched Poly(amidoamine) (PAMAM) Initiator

Low-Temperature-Initiated Cracking of Hydrocarbons to Produce Olefins: Simulation and Comparison of Different Initiators

Hyperbranched Poly(amidoamine) As an Efficient Macroinitiator for Steam Cracking of Naphtha

Polymerization of Cyclopentadiene Initiated by Methylaluminoxane

Alkyl Halide/tertiary Amine As Novel Initiators for Free Radical Polymerizations of Methyl Methacrylate, Methyl Acrylate and Styrene

Hyperbranched Poly(amidoamine) As an Efficient Macroinitiator for Thermal Cracking and Heat-Sink Enhancement of Hydrocarbon Fuels

A Polyester-Based Initiation Strategy for Achieving High-Efficient Cracking of Hydrocarbon Fuels

Screening experiments for initiators and initiating mechanism for the cracking of the endothermic hydrocarbon fuel

THE PREPARATION OF MMT-SUPPORTED INITIATOR AND ITS APPLICATION IN THE EMULSION POLYMERIZATION OF STYRENE

Thermal Cracking of Jet Propellant-10 with the Addition of a Core-Shell Macroinitiator

KINETICS OF STYRENE POLYMERIZATION INITIATED BY DIFUNCTIONAL INITIATOR

New Strategy for High-Performance Integrated Catalysts for Cracking Hydrocarbon Fuels.

Experiment and Simulation on Styrene Polymerization with Linear Bifunctional Initiator 2,5-Dimethyl-2,5-di(2-ethylhexoylperoxy)hexane (Dmdehph)

Effect of Different Ligands on the Preparation of Pt-xMn@HZSM-5 and Their Catalytic Performance for Iso-Butane Catalytic Cracking

The Initiation of A Macroinitiator

Kinetics of methyl methacrylate polymerization initiated by bifunctional initiator

Cracking of Platinum/hydrocarbon Nanofluids with Hyperbranched Polymer As Stabilizer and Initiator

Experimental and Modeling Investigation on the Pyrolysis of n-Decane Initiated by Nitropropane. Part I: 1-Nitropropane

Thermal decomposition behaviors of an amphiphilic macroinitiator DSHPG for hydrocarbon fuel

KINETICS OF ACRYLAMIDE POLYMERIZATION IN POLYETHYLENE GLYCOL AQUEOUS SOLUTIONS

Decomposition of 2,5-Dimethyl-2,5-di(2-ethylhexanoylperoxy)hexane and Its Use in Polymerization of Styrene and Methyl Methacrylate