Abstract:The non-destructive stress measurement method is the main trend in residual stress analysis. The ultrasonic method, which utilizes the acoustoelastic effect of the longitudinal critically refracted (LCR) wave, is one of the time-saving measurement techniques. During the practical stress measurement on a workpiece, various external factors may impact the transmission of acoustic waves and the resulting stress value. This study revealed and discussed the effects of four factors on the LCR wave: surface roughness of the examined material, temperature of the material, external mechanical vibration, and surface paint. The stress coefficient was determined by comparing the offset time of the acoustic wave with the stress measured by X-ray analyzer in the zero-stress specimens, which had undergone annealing and deep cryogenic treatment. The test results indicated that the surface roughness did not affect the transition time of the acoustic wave, but it did decrease the intensity of the signal. The increase in temperature and the transition time of the acoustic wave were in a linear relationship. Mechanical vibrations from the environment would not affect the transition time or signal intensity of the acoustic wave, whereas the application of surface paint increased the transition time. Although the effect of paint on the actual workpiece could not be easily modified during stress measurement, the ultrasonic method was still suitable for monitoring the stress of a specific position of the workpiece throughout its operational lifetime. The experiment data in this study were applied to measuring the residual stress of an aluminum ship component, and the result showed a good correspondence with X-ray stress analyzer results.

Temperature and Strain Effects Analysis of Ultrasonic Stress Detecting

Ultrasonic Measurement of Stress Considering Strain Effect

A further study on representative models for calculating the residual stress based on the instrumented indentation technique

Thermal Stress Analysis of MEMS Accelerometer Based on Finite Element Method

Research on Pressure Measurement Model Using Surface Wave Considering Temperature Effect

Effects Of Operating Conditions On Plastic Strain And Temperature In Ultrasonic Vibration Process

Strain-temperature Correlation Analysis of a Tied Arch Bridge Using Monitoring Data

Investigation of the Flow Stress Model for Cr4Mo4V Bearing Steel under Ultrasonic Vibration Conditions

Effects of factors from practical workpieces on ultrasonic LCR method stress measurement

Non-destructive evaluation of non-uniform stress fields and subsurface stress gradients using ultrasonic waves

High Temperature Effects on Surface Acoustic Wave Strain Sensor

Electromagnetic Ultrasonic Measurement for Welding Residual Stress Detection - Comparison Between Experiment with Numerical Simulation

Modelling of received ultrasonic signals based on variable frequency analysis

Non-intrusive Ultrasonic Measurement of Tie-Bar Stress for Molding Equipment

Physical Essence and Influence of Model Parameters on Dynamic Response of Rayleigh Damping

Ultrasonic Measurement of Residual Stress in Pre-stretched Aluminum Alloy Plate by Using Ultrasonic and Its Verification

Ultrasonic measurement of tie-bar stress for die-casting machine

Effect of Position of Ultrasonic Excitation Source on Thermosonic Image of Cracks

Application of Nonlinear Ultrasonic Technique to Characterize the Microresidual Strain in Metal

Noninvasive Temperature Estimation by Detecting Echo-Strain Change Including Thermal Expansion

Simulation Study of Ultrasonic Strain Reconstruction