Abstract:This study explores the influence of chemical composition and cooling rate on the microstructural formation of Al-based alloys, predominantly alloyed with Mn and Ce. Approximately 1 kg of the alloys with varying alloying element content was prepared in a protective resistance furnace. The solidified alloys were then sectioned into 100 g pieces, remelted, and cast into massive copper molds, resulting in samples with different thicknesses ranging from 0.3 to 6 mm. The cooling rates were precisely determined using numerical simulation, ranging from 10 3 to 10 4 K/s. The experimental results demonstrate that, at moderately high cooling rates (above 10 3 K/s), the primary intermetallics precipitated were identified as Al 20 Mn 2 Ce. However, at lower cooling rates, particularly when the Mn and Ce content were high, the formation of the "τ"-phase, Al 8 Mn 4 Ce, was observed and characterized by its detrimental dendrite-like morphology. Interestingly, as the cooling rate approached 10 5 K/s and in the presence of an optimal chemical composition (with sufficiently high Mn and Ce content), an amorphous structure formed at the outer surface of the samples. This amorphous structure exhibits intriguing potential for certain applications due to its unique properties. The desirable microstructure of bulk samples consists of submicron intermetallic compounds embedded in a boundary-free Al-matrix, which is promising for enhancing material strength and performance. This investigation sheds light on the crucial role of chemical composition and cooling rate in controlling the microstructural features of Al-based alloys, thereby providing valuable insights for the development of advanced materials with tailored properties for specific industrial applications. The role of rare earth metals (Ce and La) as poisoning and GFA (glass-forming ability) contributing elements is clarified. The Widmanstätten structure, appeared in the presence of high content of Mn, is discovered.

Influence of Rare Earth Nd on Solidification Microstructure of Magnesium-Aluminum Alloys with High Level Aluminum

Effects of Nd on Microstructure and Mechanical Properties of As-Cast Mg-8li-3al Alloy

Effect of rare earth Nd on the microstructural transformation and mechanical properties of 7xxx series aluminum alloys

Experimental and Simulation Investigation of Nd Additions on As-Cast Microstructure and Precipitate Development in Mg–Nd System Alloys

Effect of Nd on Microstructure and Mechanical Properties of Mg-Al-Ca Alloy

Effects of Nd on the microstructure of ZA52 alloy

The effect of alloy composition on the microstructure and tensile properties of binary Mg-rare earth alloys

Effect of Nd on the Microstructure, Mechanical Properties and Corrosion Behavior of Die-Cast Mg–4Al-based Alloy

Effect of Nd on Microstructures and Properties of AZ31 Wrought Mg Alloy

Microstructure Formation of Al-Based Alloys in the Presence of Rare Earth Metals (Ce, La) and Mn under High Cooling Rate

Microstructure and Elevated Temperature Properties of Die-cast AZ91- x Nd Magnesium Alloys

Effect of Substituting Nd for Y on Microstructure and Mechanical Properties of Mg-7Y-2Al Alloy

Effect of Trace Nd on Microstructure and Corrosion Resistance of AZ91 Magnesium Alloy

Effect of Nd addition on microstructure and corrosion resistance of Zn-5％Al alloy

Corrosion of Hot Extrusion AZ91 Magnesium Alloy. Part II: Effect of Rare Earth Element Neodymium (nd) on the Corrosion Behavior of Extruded Alloy

Effects of Nd on Extrusion Phase and Texture of Zm21 Magnesium Alloy

Effect of Nd on microstructure and mechanical properties of dual-phase Mg-9Li-3Al alloys

Effects of Nd on mechanical properties of magnesium alloy AZ91

Effects of Nd Addition on Microstructure and Mechanical Properties of Mg–6Zn–1Mn–4Sn Alloy

Effects of Nd on microstructures and properties at the elevated temperature of a Mg–0.3Zn–0.32Zr alloy

Effect of Nd Addition on the Microstructure, Mechanical Properties, Shape Memory Effect and Corrosion Behaviour of Cu–Al–Ni High-Temperature Shape Memory Alloys