Abstract:Assembly construction is the main feature of industrialized bridges, and π-shaped section steel–concrete composites that are continuously rigid have been widely used in engineering fields in recent years; however, their dynamic responses and corresponding impact coefficients in positive and negative moment regions need to be further studied. First, considering the interface slip model, we established a finite element model for the π-shaped continuous region section of the steel–concrete composite on the Sutai Expressway Tongfu No. 3 viaduct. Second, the bridge deck unevenness parameters were generated by preparing a MATLAB program with random calculations and were added to the bridge deck as the excitation load along with the vehicle load. Such parameters are defined on the basis of considering the vertical degrees of freedom of the four wheels and of one vehicle rigid body. Finally, we analyzed the displacement or stress impact coefficients as the dynamic response index of the bridge by adjusting the vehicle travel speeds, vehicle weights, interface slip stiffness values, and deck unevenness values. The results show that the change in vehicle travel speed and the change in vehicle load weight have some influence on the change in the dynamic effect of the combined beam, but this change is not significant. Moreover, the unevenness and interface slip strength changes have a large effect on the dynamic effect of the combination beam, which can significantly change the impact coefficient of the combination beam bridge. The worse the unevenness of the bridge deck is, the lower the grade of interface slip for the steel–concrete composite bridges and the higher the impact coefficient. We calculated the recommended impact coefficient values of the steel–concrete composite bridge based on the specifications for various countries, and they range from 1.16 to 1.4; such values are similar to the finite element calculation results.

Dynamic Characteristic Experimental and Analysis Investigation of Rigid Frame Box Girder Bridge

Research on computational method and dynamic characteristics of traffic vibration of steel bridge

Dynamical Behavior of Steel Box Girder Bridges Due to Vehicle-Induced Vibration at Expansion Joint

Experimental Study and Numerical Analysis of A Composite Bridge Structure

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

Static and Dynamic Behavior of Continuous Box Girder Bridge and Its Experimental Investigation

Field Test and Analysis for the Static and Dynamic Behaviour of Multi-Box Steel Concrete Composite Girder Bridge

Dynamic research on higih-pier & long-span continuous rigid frame bridge from overload vehicle

Study of Dynamic Behavior and Influences Induced by Structural Parameter Variations of Self-Anchored Suspension Bridge

Structural Performance Evaluation of A Steel-Plate Girder Bridge Using Ambient Acceleration Measurements

Dynamic Reliability of Continuous Rigid-Frame Bridges under Stochastic Moving Vehicle Loads

Reinforcement Analysis of an Old Multi-Beam Box Girder Based on a New Embedded Steel Plate (ESP) Strengthening Method

Dynamic performance of a concrete-filled steel tube high-pier curved continuous truss girder bridge due to moving vehicles

Stochastic Seismic Response Analysis of Long-span Continuous Rigid Frame Bridge

Load Test Analysis of a Long-Span Prestressed Nano-Concrete Highway Bridge

Dynamic Performance Analysis of Runyang Suspension Bridge Using Ambient Vibration Measurement

Numerical Investigation on the Dynamic Performance of Steel–Concrete Composite Continuous Rigid Bridges Subjected to Moving Vehicles

Evaluation of bearing capacity of reinforced concrete box ribbed arch bridge based on dynamic load test

Damage Analysis of Box Girder Based on a Vehicle–Bridge Interaction System

Dynamic Property Analysis of Orthotropic Bridge Deck with Local Fatigue Crack

Dynamic Reliability Assessment of Heavy Vehicle Crossing a Prototype Bridge Deck by Using Simulation Technology and Health Monitoring Data