Abstract:In this paper, a bottom-bearing arch bridge is taken as an example to carry out the bridge construction monitoring and load tests. In order to ensure the safety of the arch bridge structure in construction and reach the internal force state of the bridge, in the construction monitoring, the construction process of the main girder type and stress, construction error and safety state is monitored. At the same time, in order to verify whether the bridge can meet the design requirements, static and dynamic load tests are carried out after the bridge is completed. The results of construction monitoring show that the stress state of the structure during the construction process is basically consistent with the theoretical calculation and design requirements, and both meet the design and code requirements. The final measured stress state of the structure is within the allowable range of the beam and arch composite bridge, and the stress state of the structure is normal and meets the code requirements. The results of load test show that the measured deflection values of the middle section of the main girder of the test hole are all less than the theoretical calculation values, and the deflection is between 1.54~3.40 mm, indicating that the bearing capacity of the structure meets the design requirements. In addition, under the four working conditions, the measured values of the transverse strain of the main girder are all less than the theoretical values, and the values are all positive. The stress at the measured points is in the tensile state, which meets the design requirements, indicating that the structure has a good elastic recovery ability after unloading. This study can provide important reference value for the construction and design of the same kind of under-bearing arch bridge.

Evaluation of bearing capacity of reinforced concrete box ribbed arch bridge based on dynamic load test

Impact Factor Characteristics Of Double Parabolic Arch Ribs In A Cfst Arch Bridge Due To Vehicle Loads

Evaluation of bearing capacity of reinforced stone arch bridge based on dynamic load test

Numerical Analysis of Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges

Dynamic evaluation for simply supported reinforced concrete beam with considering the influence of overload

Static and dynamic load test on concrete hollow-core slab bridge

Research on evaluation method of bearing capacity of existing bridge based on static load test

Field Test and Analysis for the Static and Dynamic Behaviour of Multi-Box Steel Concrete Composite Girder Bridge

Static and Dynamic Behavior of Continuous Box Girder Bridge and Its Experimental Investigation

Analysis of the Existing Reinforced Concrete Rigid Frame Arch Bridge Strengthened with Arch and Cable System

Multi-rib Arch Bridge Strengthened by Stayed-Cable and Field Test

Load Test Analysis of a Long-Span Prestressed Nano-Concrete Highway Bridge

Reinforced Concrete Multi-Rib Arch Bridge Strengthened by Changing Structural System

Stress Performance Analysis of Special-shaped Arch Bridge with Longitudinal Linkage

Static Loading Test and Structural Analysis of a 700 Year Old Masonry Arch Bridge

Analysis of Finite Element and the Test of a Concrete-Filled Steel Tubular Arch Bridge under Static Loads

Field load test and Performance Evaluation of Rainbow Bridge with Sling and Leaning Tower Curved Arch

CONSTRUCTION VERIFICATION OF UNDER-BEARING ARCH BRIDGE BASED ON CONSTRUCTION MONITORING AND TEST

Numerical Investigation of the Characteristics of the Dynamic Load Allowance in a Concrete-Filled Steel Tube Arch Bridge Subjected to Moving Vehicles

Dynamic Assessment About Simple-Supported Girder Bridge

Load Test Analysis and Research on Long-Span Concrete Continuous Rigid Frame Bridge