Abstract:Because of their beautiful appearance, strong crossing ability, and reasonable stress performance, the application of tied steel box arch bridges is becoming more and more extensive. Bridge construction monitoring can control and adjust the deviation state to ensure the stress and linear state of the bridge after completion. This study carried out a symmetrical construction monitoring analysis and completed state evaluation of the newly built Dafeng River Bridge in Guangxi Province based on the finite element method. MIDAS Civil finite element software is used for simulation analysis to calculate the deformation and stress of the tied steel box arch bridge at the construction and completion stages. The tensile and compressive stress of the main arch and transverse brace, as well as the cumulative displacements of the main arch and lattice beam, are symmetrically distributed. The maximum tensile and compressive stresses are 15.1 MPa and 74.6 MPa, respectively, less than the specification's allowable value. Meanwhile, for the completed bridge under the loading combinations of serviceability limit state and bearing capacity ultimate limit state, the stress of the main arch, transverse brace, and lattice beam meets the specification requirements. The maximum cable forces of the suspender and tie rod under the bearing capacity ultimate limit state are 2189.4 kN and 2991.2 kN, and their corresponding minimum safety factors are 3.2 and 2.7. In addition, the deviations between the on-site monitoring and the finite element theoretical values are within the specification allowable range for the cable force of the suspender and tie rod and the bridge deck alignment. It indicates that the bridge construction monitoring effect is reasonable and ideal, and the symmetrically finite element simulation analysis can provide a theoretical basis for construction monitoring.

Field load test and Performance Evaluation of Rainbow Bridge with Sling and Leaning Tower Curved Arch

Case Study on Stability Performance of Asymmetric Steel Arch Bridge with Inclined Arch Ribs

Experimental Study and Numerical Analysis of A Composite Bridge Structure

Fatigue Performance Assessment of Composite Arch Bridge Suspenders Based on Actual Vehicle Loads

Finite-element Analysis for Nonlinear Stabilities of Concrete-filled Steel Tubular Arch Bridges

STUDY FOR IN-PLANE ULTIMATE STRENGTH OF STEEL CIRCULAR ARCHES WITH HORIZONTAL SPRING SUPPORTS

Field Test and Analysis for the Static and Dynamic Behaviour of Multi-Box Steel Concrete Composite Girder Bridge

Study of Load Test of Pedestrian Suspension Bridge

Analysis of Finite Element and the Test of a Concrete-Filled Steel Tubular Arch Bridge under Static Loads

Multi-rib Arch Bridge Strengthened by Stayed-Cable and Field Test

Stress Performance Analysis of Special-shaped Arch Bridge with Longitudinal Linkage

Behaviour Analysis of Prestressed Concrete Deck-Tied Arch Bridge

Study of Dynamic Behavior and Influences Induced by Structural Parameter Variations of Self-Anchored Suspension Bridge

Spatial Analysis of Self-anchored Suspension Bridge and Its Experimental Study

Load Test of Long- span Curved Continuous Frame Bridge with High Pier

Static and dynamic evaluation of a butterfly-shaped concrete-filled steel tube arch bridge through numerical analysis and field tests

Bearing capacity analysis of a curvilinear box girder landscape bridge

Static and dynamic load test on concrete hollow-core slab bridge

Load Test Analysis of a Long-Span Prestressed Nano-Concrete Highway Bridge

Symmetrically Construction Monitoring Analysis and Completed State Evaluation of a Tied Steel Box Arch Bridge Based on Finite Element Method

Analysis of the Transverse Connection Members of R.C.Rigid-frame Arch Bridge