A Small Telephone Exchange System Design Based on LAN

Mei Xie

2002-01-01

Abstract:In this paper, the basic principle of a small telephone exchange system based on LAN and its advantage compared with traditional PBX system are described, then the small telephone exchanging system design is addressed in detail.

What problem does this paper attempt to address?

Design of IPPBX based on embedded system

Yuemei YANG,Pingshan CHEN,Dongqin FENG

DOI: https://doi.org/10.16652/j.issn.1004-373x.2015.12.022

2015-01-01

Abstract:With the packet exchange principle,IPPBX can realize the functions of the traditional PBX on Ethernet and overcome the insufficiency of traditional PBX effectively. It has powerful functions,comprehensive services with less cost. The typical networking mode of IPPBX is introduced in this paper. The design principles of each module system MPC8250 hardware system based on IPPBX and the software system of the system are given. The protocol conversion software of main con?trol module is also analyzed. The test result shows that the system can achieve simultaneous processing of 200 calls and its voice quality is excellent.
A Solution to the Callcenter Using VoIP Based on H.323 Protocols

KANG Li-min,ZHANG Dan

DOI: https://doi.org/10.3969/j.issn.1007-130x.2006.03.005

2006-01-01

Abstract:In this paper,we introduce the H.323 and SIP protocols related to VoIP, and expatiate a VoIP remote telephony solution to the callcenter based on H.323 protocols.
Design and Implementation of Distributed VoIP Architecture Based on SIP Protocol

张旭光,平玲娣,潘雪增

DOI: https://doi.org/10.3969/j.issn.1000-3428.2004.14.037

2004-01-01

Abstract:With the development of the Internet technologies and computer communication technologies, the traditionary circuit-switch based network must evolves to the new generation network which is based on the packet-switch technology. Facing the progress and status of the convergence of the three-networks, This document presents a distributed and SIP protocal based VoIP system prototype. Due to combinating of merits of SIP and IP, this model not only provides the interoperation with the existed network, but also provides an extendable plat for the NGN. This model uses private VoIP network to achieve the QoS.
Switch Technology in Intelligent Substation

Xiang Qun Wang,Zeng Hua Zhang,He Wang,Chun Long Li,Xiao Yan Sun,Wei Wang

DOI: https://doi.org/10.4028/www.scientific.net/amr.748.468

2013-01-01

Advanced Materials Research

Abstract:As the technology of intelligent substation is developed gradually, the significance of he Ethernet switch in the substation is obvious increasingly.Firstly, the learning and transmitting principle of Ethernet frame are introduced, then the network program of secondary system using the switch in the hierarchial structure is described. And then a detailed analysis of the VLAN, QoS, mirror and ring network is given, also the various technical application scheme are provided according to a variety of IED features and data flow characteristics. On the basis of the different business needs and different message types, the reasonable design of network topology and the flexible use of these switching technology , can support security, stability, reliable transmission of communication message in intelligent substation , therefore the whole substation becomes more strong.
LAN-based IP Phone System

Kai Shen,Yong Xiang,Meilin Shi

DOI: https://doi.org/10.3321/j.issn:1002-8331.2001.06.018

2001-01-01

Abstract:Converged Network tries to merge existing PSTNs,CATV networks and computer networks into one unitary network. It makes better use of network bandwidth,provides new kinds of services,and brings great economic benefits as well as social benefits. This paper proposes a novel LAN-based IP phone system that merges traditional PSTNs and computer networks together to meet the demands of the next-generation Converged Network. The designs of its architecture,System Management Server,Internet-PSTN Gateway,and digital terminals are presented in the paper. With this approach,the system can provide traditional phone services on LAN. Therefore the redundancy in constructing both computer networks and PSTNs can be avoided. The system can also make more efficient use of the bandwidth and provide some novel value-added services that are very useful.
LDAP-based IP-Phone Distributed Callcenter Design

环翾,田瑞雄,赵明生,李星

DOI: https://doi.org/10.3969/j.issn.1001-3695.2001.12.034

2001-01-01

Abstract:We apply LDAP to the callcenter design of the practical IP-Phone system Cool-Audio, and present a LDAP-based IP-Phone distributed callcenter design. This design shows the features of good expandability, reliability and efficiency.
Small and Medium-sized Enterprise Office LAN Construction Scheme

Zhuoyu Mo

DOI: https://doi.org/10.2991/EMCS-16.2016.283

Abstract:through the development of small and medium-sized enterprise network system of data statistics, increasingly strong demand for network out of the small and medium-sized enterprises is discussed in this paper, after analyzing the current situation of small and medium-sized enterprise network at the same time, build a set of suitable for the development of the enterprise itself the decision of the network environment is necessary; Formed through the network design, network management scheme, network basic configuration scheme based on safety, these three aspects of small and medium-sized enterprise network are discussed, using the experience and cases to elaborate explanation of various key issues encountered by building LAN; Finally conclude that a majority of small and medium-sized enterprises from the network, management, the implementation of the design phase should follow the general principles. This article mainly research in wireless local area network (LAN) in which an analysis of the small business needs, and how to form a economic, security, application of wireless local area network (LAN) system, combined with the actual simulation framework to build a safe construction scheme of the wireless local area network

Computer Science,Engineering,Business
Design of IP Telephone Based on TMS320C5402

侯建军,柳立鹏,邵文龙

DOI: https://doi.org/10.3969/j.issn.1673-0291.2001.03.028

2001-01-01

Abstract:A DSP-based solution to LAN/Intranet-oriented IP telephone is presented. This IP Telephone can be used either as a desktop PC peripheral or as an Intranet network terminal. Its cores are TMS320C5402 in charge of voice code and MPC860T in charge of communications protocol processing and control logic. Several kinds of interface including USB, RS232 and RJ45 are designed to allow IP telephone to connect with other equipment in flexible ways. Some details of hardware architecture are discussed in this paper.
A simple digital SPC system based on AT89C51

Lan LIU,Wei-na CAI

DOI: https://doi.org/10.3969/j.issn.1009-2552.2005.04.011

2005-01-01

Abstract:This paper introduces a simple time division switching system based on AT89C51. The system can perform the basic functions of a telephone call handing. There is a detailed explanation for the operational principle,design of hardware and software.
Design of Non-central-switch Calling System Based on STM32F103

Jing-hong MIAO,Wei WANG,Zhi-gang WU,Xin HAN

DOI: https://doi.org/10.3969/j.issn.1671-1815.2017.04.037

2017-01-01

Abstract:Focusing on the problems existing in current industrial and mining enterprise production dispatching communication system which includes the single of calling mode,the poor quality of communication in strong noise environment,the lack of operating and managing,a solution of non-central-switch calling system based on STM32F103 is proposed.The system optimizes current non-central-switch calling system and increases the functions of forced-inserting,forced-releasing and supervising.The DSP voice-processing technology is used to improve the anti-noise performance of user terminals.The communication between user terminals and PSTN users can be realized through the repeater.Besides,the management and control of the entire system can be realized through the management controller and management terminal.The system parameters can be configured according to wired multi-channels user sharing theory and channel-number optimized configuration scheme under different parameters.The experimental results show that the designed system with a high reliability and practicability,a strong call pertinence,a good communication quality.
Design of Building Intercom System Based on Power Line Carrier

Li You

2010-01-01

Abstract:To the question that traditional building intercom system is complex in wiring and high cost in construction of the status quo,a building intercom system based on power line carrier without rewiring was designed.Any two commu-nication terminals in this system can communication by dialing up in the same electricity grid in existence.Speech sig-nal after a process of acquisition and compression by GSM6.10 algorithm can be transferred by the power line and be played after it receiving and decompression by another terminal.After this compression and decompression,it can im-prove network bandwidth utilization as well as reduce transmission bit rate.The results prove that the system can not only meet the requirement of the access control function and it is easy to extended and maintained as well.It is cost-less but useful,so it has a great space for development in smart building.
Standard Interchange Protocol 2: Theory, Design and Implementation

Wei Dong

DOI: https://doi.org/10.4028/www.scientific.net/amm.513-517.2480

2014-01-01

Applied Mechanics and Materials

Abstract:In this paper, we conduct research on Standard Interchange Protocol 2 (SIP2). Then, based on the research, a SIP2 class is designed using object-oriented model. The SIP2 class includes several methods, which comprise check in, check out, patron status, and so forth. To demonstrate its functionality, we use the SIP2 class in a new library circulation system. Compared to traditional protocols for transaction in library system, test results show that our implementation of SIP2 class works well and has a better performance.
A Call Control Module Design Based on SIP

FENG Tao,FU Jian-xun,LU Jian-hua,WANG Dong-hai

DOI: https://doi.org/10.3969/j.issn.1001-893x.2007.01.041

2007-01-01

Abstract:This paper introduces the design of a call control module which uses SIP and is mainly used in wireless LAN(WLAN).The design by programming is tested and comparison with other products is made.It is proved that this design has great capability in many aspects.
Design and Development of Exam System in LAN Based on Windows Server 2008

Xiaoping Huang

2009-01-01

Abstract:This paper introduces design and implementation of key techniques of the experiment exam system in local area network based on Windows Server 2008.Specificy speaking,to implement the setup of experiment test system by using the techniques of Client/Server,Share folder,Batch script,Mapping network drive.
A Novel Method To Build Smart Networked Alarm System Based On Cid

Jx Zou,Hb Xu,Xj Zhou

2005-01-01

Abstract:In most existing smart networked alarm systems, the control and status signals are transmitted in PSTN (Public Switched Telephone Network) using DTMF (Dual Tone Multi Frequency) technology. It needs establish connection before data transmission. But it is proved that the running cost of the existing systems is high because of the frequent signals transmission, and the response time is too long. A novel method is proposed in this paper to design a smart networked alarm system based on CID (Calling Identity Delivery) technology. The system formed by this method has advantages of shorter response time and lower running cost. The networked system, which consists of user terminals and control center, can transmit data to the control center rapidly through phone lines after alarms are touched off in the case of on-hook and off hook. The realization of the system control functions and communication protocols under single terminal mode and mufti-terminals mode are both described in detail. The system runs reliably in practice and performs very well.
The Design and Realization of Intelligent Residential Sub-district Communication Network Platform on Ethernet and Ebi Technology

Lei Xu

2011-01-01

Abstract:Intelligent residential sub-distract communication network is the physical platform of building up intelligent residential,sub-dis tract comprehensive management center and outside wide area network handing over informations.This paper has given the design method of intelligent residential sub-distract communication network platform on Ethernet technology,has put forward the scheme of designing the family intelligent system with EBI technology.
Adaptive SIP-based Peer-to-Peer VoIP System Design and Implementation

LI Jing-yuan,HUANG Liu-sheng,JIA Wei-jia

2009-01-01

Abstract:In recent years,VoIP applications are growing rapidly.However,the commonly used offer/answer mechanism cannot work properly in the environment where network address translators(NAT) are massively deployed.Current solutions rely on STUN,in which heartbeat messages would periodically be sent out to maintain the mapping between the public and private addresses.The state of maintaining heartbeat messages would become a huge burden to the VoIP server.We design and implement an adaptive SIP-based peer-to-peer communication system that supports VoIP over NATs.The system extends the SDP offer/answer model to share the public and private IP addresses and ports of both media ends at the call establishment of a session.We demonstrate its feasibility through the implementation of a real system.We evaluate the effectiveness of our proposed scheme and show that our system has a better performance when compared to other VoIP applications that use the supernode-relay mechanism.
STUDY ON STRUCTURE OF SCALABLE IP PBX MEDIA GATEWAY

Zhang Jun,Zhou Yu,Guan Haibing,Bai Yingcai

DOI: https://doi.org/10.3969/j.issn.1000-386X.2006.09.038

2006-01-01

Abstract:Staying in custom area,IP PBX system realizes softswitch technology,which is the core technology in NGN(Next Generation Network).while one of IP PBX's core functions is media process.This article promotes an improved architecture of IP PBX's media process module,which is high-scaled,suitable for mutil-CPU,by the way,this architecture is promoted after analyzed Asterisk,which is a famous IP PBX system.
DESIGN AND IMPLEMENTATION OF VOIP-BASED VIRTUAL CALLCENTER

Chen Wenhua,Huang Xiaoping,Chen Kai,Bai Yingcai

DOI: https://doi.org/10.3969/j.issn.1000-386X.2006.02.020

2006-01-01

Abstract:This paper mainly focuses on the structure and functions of call-center and proposes a new VoIP-based virtual call center model.With the application of VoIP technology in this model,enterprises can use abundant resources provided by the telecommunication operators and be relaxed from high costs for constructing and operating the call-center.In addition,they can obtain the same convenience as self-constructed call center by using Web technology.
Design and Implementation of Socket-Based-Network Connections Smart Home System

Yu-Han Liu,Qian Hu,Min Xiao

DOI: https://doi.org/10.1109/IMCCC.2016.113

2016-07-01

Abstract:A smart home control system could link independent electric appliances together 'intelligently' and provide comprehensive, fast and smooth exchange of information. This system gives people real-time information control, which improves their life quality. In this study, an embedded smart home system based on socket network connections was designed using ARM9 development board and embedded Linux operating system. This system could control all the subsystems that are related with home life, such as light control and sound control. Based on C/S structure, the designed smart home system has rich hardware and software resources, low cost and low power consumption, as well as easy expansion, update and maintenance. This system has practical values.

Engineering,Computer Science

A Small Telephone Exchange System Design Based on LAN

Design of IPPBX based on embedded system

A Solution to the Callcenter Using VoIP Based on H.323 Protocols

Design and Implementation of Distributed VoIP Architecture Based on SIP Protocol

Switch Technology in Intelligent Substation

LAN-based IP Phone System

LDAP-based IP-Phone Distributed Callcenter Design

Small and Medium-sized Enterprise Office LAN Construction Scheme

Design of IP Telephone Based on TMS320C5402

A simple digital SPC system based on AT89C51

Design of Non-central-switch Calling System Based on STM32F103

Design of Building Intercom System Based on Power Line Carrier

Standard Interchange Protocol 2: Theory, Design and Implementation

A Call Control Module Design Based on SIP

Design and Development of Exam System in LAN Based on Windows Server 2008

A Novel Method To Build Smart Networked Alarm System Based On Cid

The Design and Realization of Intelligent Residential Sub-district Communication Network Platform on Ethernet and Ebi Technology

Adaptive SIP-based Peer-to-Peer VoIP System Design and Implementation

STUDY ON STRUCTURE OF SCALABLE IP PBX MEDIA GATEWAY

DESIGN AND IMPLEMENTATION OF VOIP-BASED VIRTUAL CALLCENTER

Design and Implementation of Socket-Based-Network Connections Smart Home System