A simple digital SPC system based on AT89C51

Lan LIU,Wei-na CAI

DOI: https://doi.org/10.3969/j.issn.1009-2552.2005.04.011

2005-01-01

Abstract:This paper introduces a simple time division switching system based on AT89C51. The system can perform the basic functions of a telephone call handing. There is a detailed explanation for the operational principle,design of hardware and software.

What problem does this paper attempt to address?

Implementation of Serial Communication between PLC and Single-chip Microcomputer

Cheng Liang,Lin Bin,Cha Lingzhi

DOI: https://doi.org/10.3969/j.issn.1000-3886.2006.03.013

2006-01-01

Abstract:This paper introduces serial communication between PLC and single-chip microcomputer with the example of S7-226 PLC and AT89S51 MCU.Detailed explanation of hardware configuration and program design in this communication system is given.The design project in paper has been applied successfully in automatic pill-filled machine.
Design of IPPBX based on embedded system

Yuemei YANG,Pingshan CHEN,Dongqin FENG

DOI: https://doi.org/10.16652/j.issn.1004-373x.2015.12.022

2015-01-01

Abstract:With the packet exchange principle,IPPBX can realize the functions of the traditional PBX on Ethernet and overcome the insufficiency of traditional PBX effectively. It has powerful functions,comprehensive services with less cost. The typical networking mode of IPPBX is introduced in this paper. The design principles of each module system MPC8250 hardware system based on IPPBX and the software system of the system are given. The protocol conversion software of main con?trol module is also analyzed. The test result shows that the system can achieve simultaneous processing of 200 calls and its voice quality is excellent.
Design of an Intelligent Alarm System Based on 80C51

LI Hao-ran,CHEN Xiao-yu,LIU Yu-ling,WANG Xiao-ping

DOI: https://doi.org/10.3969/j.issn.1673-629x.2012.05.060

2012-01-01

Abstract:The safety of househood is the key part of personal and property safety.As the increased case of housebreaking and robbery,the demand of a cheap,simple house alarm system with small disturbance is rising day by day.It introduces an alarm system based on the 80C51 microcontroller,describing its composition and software/hardware design.This system integrates situation identification,voice warning,on-site and remote alarming with relatively low cost,guaranteeing a friendly man-machine-environment by providing both guests and the house owner with necessary instructions.It supports operations including system activation/deactivation,time setting,password setting,alarming phone numbers setting,alarming time and phone number recording and checking.When activated,it would simultaneously ring the alarm and dial the stored numbers to inform the owner or the police of the potential housebreaking.The system designed here will be base of the practicle alarm system in the future.
Study on the Embedded SPC System Based on LAN

Yin Jianjun,Yu Zhonghua,Wu Zhaotong

DOI: https://doi.org/10.1108/15982688200300014

2003-01-01

Asian Journal on Quality

Abstract:Statistical Process Control (SPC) is recognized as one of the most important tool of quality control (QC), an is one research focus in order to implement SPC quickly and effectively using computer technology and network environments. This paper proposes the principle and topology of embedded SPC based on the Internet/Intranet, emphatically discusses the embedded data sampling block, embedded network interface and SPC strategy. An example of application is given.
The Design of MDF Remote Intelligent Supervisor System with S3C44B0X

LIN Ying-zi,XU Yuan-xin,WANG Kuang

DOI: https://doi.org/10.3969/j.issn.1671-7147.2005.03.007

2005-01-01

Abstract:MDF remote intelligent supervisor system reduces administrators redundance and facilitates concentrating management of the distributed switching offices,which monitors malfunction of the remote office and transfers the messages to the center office. This system adopted ARM7TDMI-S3C44B0X as main processor produced by SAMSUNG Corp. The communication method between center machine and the remote one is based on Ethernet. The paper elaborates the system scheme and the realization of network communication.
A method for communication between DSP and MCS-51 by SPI interface

蔡慧,赵荣祥,吴靖

DOI: https://doi.org/10.3969/j.issn.1003-188X.2004.06.096

2004-01-01

Abstract:This paper explains the possibility of communication between DSP and MCS-51, and analyzes characteristics and theory of SPI in detail. It mostly introduces the design method of hardware and software for extending SPI, and implements the interface of communication between DSP and MCS-51.
The Design and Application of an Altimeter System Based on 89C52

YUAN Jie,HAN Bo,LI Ping

DOI: https://doi.org/10.3969/j.issn.1001-4551.2005.10.009

2005-01-01

Abstract:This paper accounts for the design problem of an altimeter system based on 89C52,which is an 8 bit microcontroller produced by ATMEL. Specially,it depends on the relationship between pressure,temperature and altitude.The most important points in this paper is that it uses the I/O in 89C52 to achieve the function of SPI,which makes the A/D function come true with TLC2543.Thereafter it transfers the data which is processed to the LCD,also it returns the data to the control computer through RS232.
In System Programming Design of 51 Microcontroller Base on USB Interface

Chen Zhi-ying

Abstract:The paper presents a design of 51 microcontroller AT89S51/52/53 in system programming base on USB interface,emphasis on the hardware design of USB-SPI interface circuit and the design of PC software for microcontroller programming by VB.The design has many advantages such as small size,low power consumption,high reliability etc.It is very valuable in the applications of 51 microcontroller and is worth references as well.

Computer Science,Engineering
Long Distance Monitoring and Controlling System Based on AT89S52

XU HAIBO,LIAO CHUANSHU

DOI: https://doi.org/10.3969/j.issn.1008-0570.2007.20.026

2007-01-01

Abstract:At now, with the fast development of the applied technology of the Single-chip Microprocessor, the embedded systems with the core of Single-chip Microprocessor have been used in many fields. In this paper, there is a project of a Long Distance Auto-matic Monitoring and Controlling System for Alarm, which is constituted by the AT89S52 and the chip of the DTMF.
The Design of the Infrared Remote-Control Multi-Line Switch Based on Simgle Chip Microcomputer

ZHANG Yu-mei,QU Shi-ru,BAI Shu-lin

DOI: https://doi.org/10.3969/j.issn.1674-649x.2005.04.014

2005-01-01

Abstract:The design of an infrared remote-control multi-line switch is introduced.This switch is based on principle of infrared remote-control and AT89C52 single chip microcomputer controlling.Its system composition and design of hardware and software are presented.In order to achieve exact remote-control,the transmitted signal is divided into 3 parts:the connecting section,the controlling section and the ending section,then the receiver will verify it.It was proved that this kind of remote controller is convenient,reliable and practical after using in remote-control system.
Design of Wireless Communication System Based on nRF905

Zhou Chao,Wang Chen

2009-01-01

Abstract:This paper introduces a wireless communication module based on Atmega128L of Atmel and single-chip RF transceiver chip nRF905 of Nordic,and introduces the system working principle,hardware design and software design,and gives out the main procedures. This system has Advantages of low cost,easy expansion,easy operation,etc.,can be widely used in remote control,wireless data collection and other fields.
DESIGN AND IMPLEMENTATION OF A SHARED BUFFER BASED ATM SWITCHING ELEMENT WITH SIMPLE ADDRESS MANAGEMENT

梁岗,赵有健,刘斌,马居强

DOI: https://doi.org/10.3969/j.issn.1000-1220.2001.03.002

2001-01-01

Abstract:This paper proposed a shared buffer based ATM switching elementwith simple address management(SBSAM). It simply uses a counter to manage the address space. Besides easy to control and implement, it realizes multicast, multiple cell priorities, queue scheduling, back pressure mechanism, etc. It guarantees QoS to a great extent. At the same time, act as a foldable switching element, it also has the virtue of easy to expand, convenient to interconnect, simple to realize distributed control.
Design of simplex wireless call and data transmit system based on MCU

Li Jie

Abstract:Based on MCU, a simplex wireless call and data transmit system is designed by analog frequency modulation technique. In the frequency interval of 30～40 MHz, the transmittal of long distance and simplex by small power that voice signals are inputted through microphone and line is realized. The host and subordinate machines can undertake smart communication by frequency shift keying(FSK)modulation mode. There are 256 subordinate stations in our architecture, forming a one-to-multiple point, simplex, wireless call system. There is no obvious distortion and low bit error rate during transmittal. The number of subordinate stations can optionally change, while the host station can selectively or wholly dial-up. Data transmits while voice signals communication in this system. The English words, Chinese characters, short messages and station number will be displayed on liquid crystal display(LCD).

Computer Science,Engineering
Multi-functional Taximeter on the Basis of AT89C51 SCM

Chen Ai

2008-01-01

Abstract:The intellectual taxi valuate system takes AT89C51 SCM as the core,which has input,valuate,pronunciation report,and revealing etc.It introduces design method of the system hardware and software structure in the article,and provides hardware circuit of the system and software programming.
Design of Intelligent Home Control System Based on DSP

Yong-de ZHANG,Jun-feng WEI,An-bang GAO

DOI: https://doi.org/10.3969/j.issn.1008-0570.2008.19.018

2008-01-01

Abstract:Taking Sunplus 16-digit micro-controller SPCE061A as its core and cooperating with various external control system, an intelligent home control system is designed. It adopts high performance sending-receiving devices to fulfill the function of collecting and transmitting messages of the controlling equipment. In this paper, the author introduces hardware configuration and software work-ing process of a new generation of intelligent home control system so as to lower the cost and the power consumption while fulfilling its functions.
Improvement of Ultrasonic Distance Measuring System

Yu Jiang,Rui Song,Mingting Yuan

DOI: https://doi.org/10.1051/itmconf/20181702008

2018-01-01

ITM Web of Conferences

Abstract:This paper mainly introduces a kind of ultrasonic distance measuring system with AT89C51 single chip as the core component. The paper expounds the principle of ultrasonic sensor and ultrasonic ranging, hardware circuit and software program, and the results of experiment and analysis.The hardware circuit based on SCM, the software design adopts the advanced microcontroller programming language.The amplitude of the received signal and the time of ultrasonic propagation are regulated by closed loop control. [1,2]The double closed loop control technology for amplitude and time improves the measuring accuracy of the instrument. The experimental results show that greatly improves the measurement accuracy of the system.
Design and Implementation of Serial Communication Based on DSP

ZHANG Kun-chan,YANG Jian-hua,DU Xin-hu

DOI: https://doi.org/10.3969/j.issn.1002-2279.2010.06.009

2010-01-01

Microprocessors

Abstract:A TMS320LF2407A-based serial communication system was developed to realize communications between digital signal processor(DSP) and other controllers.This system employed an Universal Asynchronous Receiver Transmitter(UART) module and a Serial Peripheral Interface(SPI) module to connect the DSP to a host PC and a client display peripheral respectively.Detailed principle and method for hardware design were introduced;communication programs and relative software structure were given.Communication experiments showed that the system was simple in circuit design and stable and accurate in data transmission.It has reference value and practical benefit to exploit communications of DSP system.
Design and implementation of Digital Electronic Clock System based on AT89S52

Liu De-cang

Abstract:It was desgined a Digital Electronic Clock System using AT89S52 MCU made by the ATMEL corporation and RTC DS12887 made by the DALLAS corporation,which presented the diagram of applied circuit principle and software design and implemented the date,time display and reported time.

Computer Science,Engineering
New generation speech CODEC for digital telephone switching

Xingjun WU,Shaojun WEI

DOI: https://doi.org/10.3321/j.issn:1000-0054.1999.Z1.012

1999-01-01

Abstract:In order to decrease cost and improve performance of Digial Telephone Switching, a four channel CODEC device based on DSP was designed. In this device, oversampled analog to digital converting technique and digital signal processing technique were used. Due to these techniques, it is possible to take the advantages of digital VLSI technique, implement multi channel speech CODEC in a single chip, and make the cost of switching low. Meanwhile, programmable digital filters were used, the performance of the system can be improved just by adjusting the coefficients of the filters by software according to different line characteristics. This device was fabricated in a 0.5μm CMOS process with double poly and 3 layers metal, and integrated on a die size of 25mm 2. Measurements show that all the necessary CCITT's recommendations are fullfilled.
Design of Central Processing Module of Baseband SoC for Digital Interphone

Chao ZHANG,Xiaokang LIN

DOI: https://doi.org/10.3969/j.issn.1002-8684.2012.01.008

2012-01-01

Abstract:DW8051 is a 8-bit microcontroller core that is instruction-set-compatible with the industry-standard 8051.An approach to the design of central processing module of baseband SoC for digital interphone is described.The architecture of baseband SoC and functions of the central processing module are analyzed firstly,and then a verification platform is designed to test whether low-end 8051 microcontroller meets work requirements of the system,finally design method and verification process for the central processing module based on DW8051 IP core are discussed in detail.

A simple digital SPC system based on AT89C51

Implementation of Serial Communication between PLC and Single-chip Microcomputer

Design of IPPBX based on embedded system

Design of an Intelligent Alarm System Based on 80C51

Study on the Embedded SPC System Based on LAN

The Design of MDF Remote Intelligent Supervisor System with S3C44B0X

A method for communication between DSP and MCS-51 by SPI interface

The Design and Application of an Altimeter System Based on 89C52

In System Programming Design of 51 Microcontroller Base on USB Interface

Long Distance Monitoring and Controlling System Based on AT89S52

The Design of the Infrared Remote-Control Multi-Line Switch Based on Simgle Chip Microcomputer

Design of Wireless Communication System Based on nRF905

DESIGN AND IMPLEMENTATION OF A SHARED BUFFER BASED ATM SWITCHING ELEMENT WITH SIMPLE ADDRESS MANAGEMENT

Design of simplex wireless call and data transmit system based on MCU

Multi-functional Taximeter on the Basis of AT89C51 SCM

Design of Intelligent Home Control System Based on DSP

Improvement of Ultrasonic Distance Measuring System

Design and Implementation of Serial Communication Based on DSP

Design and implementation of Digital Electronic Clock System based on AT89S52

New generation speech CODEC for digital telephone switching

Design of Central Processing Module of Baseband SoC for Digital Interphone