Abstract:As mild steels are the most widely used structure materials,it is no doubt that the study on their atmospheric corrosion mechanism is of great significance.Traditional study on atmospheric corrosion of mild steels emphasized more on on-site experiments and data collection and physical analysis.Relatively,application of electrochemical researching methods has not been frequently used in this field.Electrochemical impedance spectroscopy(EIS) method has been highly valued by electrochemists due to its multiple advantages.However,it has been less used in study of corrosion process of mild steels after the rust has been generated.As a matter of fact,during the service life of mild steel in atmospheric environments,the rust period is much longer than naked steel period due to the low corrosion resistance of these steels.Therefore,it is more meaningful to study the corrosion behavior of steels with rusts both for development of new weathering steels and for the prediction of the service life of weathering steels.In this work,the corrosion behavior of mild steel Q235 under simulated industrial atmospheric corrosive condition was monitored and studied by EIS method,with a focus on the evolution of cathode reactions.The result showed that there existed a critical condition of electrolyte film for corrosion rate of mild steel Q235both for the substrate and rusted surface during wet-dry cycles.Comparison and analysis showed that,two parallel reactions,the reduction of oxygen and the reduction of rust,existed at the cathode during the corrosion process.With the increase of the wet-dry cycles,the activity of oxygen reduction tended to decrease,and almost disappeared in the end;while the activity of rust deduction tended to increase and became the main cathode reaction in a short period.In each wet-dry cycle,the corrosion rate first increased then decreased with the decrease of the electrolyte layer thickness,which was caused by the two synchronous and opposite effects on the corrosion reactions.

RUSTING EVOLVEMENT OF MILD STEEL UNDER WET/DRY CYCLIC CONDITION WITH Ph 4 NaHSO_3 SOLUTION

CORROSION BEHAVIOR OF RUSTED MILD STEEL UNDER MEANS OF WET/DRY ALTERNATE CONDITIONS

The Evolution of the Corrosion Mechanism of Structural Steel Exposed to the Urban Industrial Atmosphere for Seven Years

Investigation of Microstructure and Corrosion Behavior of Weathering Steel in Aqueous Solution Containing Different Anions for Simulating Service Environments

Corrosion Behaviors and Mechanical Properties of Q235 Steel Pipes Collapsing Due to Corrosion after 25-Year Service in Urban Industrial Atmospheric Environment

ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY MONITORING ON MILD STEEL Q235 IN SIMULATED INDUSTRIAL ATMOSPHERIC CORROSION ENVIORNMENT

Electrochemical Study on Corrosion Process Characteristics of the High-Strength Low-Alloy Steels in NaHSO 3 Solution

Corrosion behavior of weathering steel in marine atmosphere

CATHODIC ELECTROCHEMICAL BEHAVIORS OF MILD STEEL IN SEAWATER

CORROSION BEHAVIOR OF WEATHERING STEEL IN A WET/DRY ENVIRONMENT CONTAINING MgCl2

Atmospheric Corrosion Behavior Of Weathering Steel In Periodically Changed Environment

Corrosion Behavior of Q235a Steel under Wet-Dry Cyclic Condition

Corrosion Micro- and Macro-Electrochemical Behavior of Rusted Carbon Steel and Weathering Steel

Corrosion behavior of the low alloy weathering steels in stagnant water

Corrosion evolution of electric power equipment metal materials under industrial pollution environment with high heat and high humidity

Atmospheric Corrosion Behavior of Mild Steel with Different Cooling Modes After Austenitization

Evolution of Corrosion Products of Carbon Steels and Galvanized Steel in Simulated Marine Atmosphere

Investigation on the initial atmospheric corrosion of mild steel in a simulated environment of industrial coastland by thin electrical resistance and electrochemical sensors

Research on Corrosion Behavior of Low Alloy Steel Under the Natural Seawater Wet-Dry Alternate Condition

Corrosion Characteristics of Low-Carbon Steel in Hot and Humid Industrial-Marine Atmosphere

Corrosion Behavior of Ultra-High Strength Steel 300M in Different Simulated Marine Environments