Define New Class to Perfect Window's Interface

Chen Ai

2002-01-01

Abstract:The thesis applies the method of new class to set up or to simulate the common form controls and ActiveX controls supported by Visual FoxPro6.0. Through the inborn new class, achieves the optimization of window's Interface of system software program by VFP.

What problem does this paper attempt to address?

Interface Passageway of Visual FoxPro and Microsoft Word

Chen Ai

2002-01-01

Abstract:Apply general typename of VFP6.0 and edit function of Microsoft Word, to study the interface passageway between them. Apply the characteristic of OLE object, to realize the display answer to no papers exam(including science),and direct print for answer by using of the technology of Dynamic Data Exchange(DDE).
Interface Technique of Real-time Database Based on OPC and Its Application

XU Wan-tian,SU Hong-ye

DOI: https://doi.org/10.3969/j.issn.1001-3695.2006.05.007

2006-01-01

Abstract:The design pattern,framework and corresponding advantages of APC-iOPC interface module are described based on OPC technique.APC-iOPC interface software was successfully applied in the real-time database system for a chemical engineering factory.Finally,further development of APC-iOPC interface software module is discussed.
Methods of Printing out Reports of Virtual Instruments Based on ActiveX

ZHENG Mo-si,ZHOU Xiao-jun

DOI: https://doi.org/10.3969/j.issn.1001-4551.2006.12.004

2006-01-01

Abstract:A new way to print reports directly in LabVIEW with ActiveX was pointd out,and the application programs were presented through comparison with advantages and disadvantages of several methods of report printing based on LabVIEW,which brings the new thread of the LabVIEW functions' extendment.
The Design of Host-Computer Software for the EPA Control Net

TAO Li,FENG Dong-qin,JIN Jian-xiang,CHU Jian

DOI: https://doi.org/10.3969/j.issn.1000-0682.2006.05.006

2006-01-01

Abstract:This paper presents a design conception for a hostcomputer software system applicable to the EPA industrial control net.This software system comprises configuration software,monitor software and database along with a kind of additional net management software.The paper also makes studies of the design of the function and program frame-work of the net management software,and puts forward a feasible project for implementation.
The fuzzy PID control based on the ActiveX and its application in the supervisory control system

Yu Youguan,Gong Guofang,Hu Guoliang

DOI: https://doi.org/10.16731/j.cnki.1671-3133.2006.04.014

2006-01-01

Abstract:The union programming of Matlab and Visual C+[KG-*2]+was introduced,the Fuzzy_PID control was also realized using the union programming and the ActiveX technology.The Fuzzy_PID ActiveX control has made good test result in the monitoring control system.
Design and Realization of Application Interface Between Real-Time Database and Industrial Process Control System

GAO Feng,WAN Li,LIU Yu-ming,WU Jun-qiang,WANG Xiao-yong,LIANG Jun,WANG Wen-qing,LIU Zhi-peng

DOI: https://doi.org/10.3969/j.issn.1671-7147.2007.01.002

2007-01-01

Abstract:For the application of real-time database in a petrochemical plant,the article put forwards to a new concept to resolve the communication among real-time database and DCS,control software,and Web-based user interface.The scheme is developed based on Windows 2000 Server using the technique of multe-threading,anolymous pipe and WinSock,etc.The results of long industrial running of this scheme show that it is more effective and feasible for industrial process.
Study on the Real-Time Serial Communication Based on Windows

陈月斌,邬义杰,刘楚辉

DOI: https://doi.org/10.3969/j.issn.1001-2265.2003.12.003

2003-01-01

Abstract:Aiming at the real-time property of serial communication between upper and lower computer of distributed control system under Windows, based on the study on VxD work characteristic and the mechanism of serial communication, this paper describes the programming method of real-time serial communication,by using VtoolsD tool, which is good solution to the key technology of developing control system of precision machining.
The Research and Realization on Blackboard Function of Mechanical Layout CAI Software

Mowei Shen

2001-01-01

Abstract:In this paper we present the definition blackboard fu notion. Based on the analysis characteristics of mechanical layout, the research on concrete requests, implementation thinking and architecture framework blackboard fu notion arc given. Utilizing Visual C++ 6.0, we draw up a practicable blackboard function module.
The Design of EzWindows: A Graphics API for an Introductory Programming Course

Bruce R. Childers,James P. Cohoon,Jack W. Davidson,Peter Valle

DOI: https://doi.org/10.48550/arXiv.cs/9810004

1998-10-03

Computers and Society

Abstract:Teaching object-oriented programming in an introductory programming course poses considerable challenges to the instructor. An often advocated approach to meeting this challenge is the use of a simple, object-oriented graphics library. We have developed a simple, portable graphics library for teaching object-oriented programming using C++. The library, EzWindows, allows beginning programmers to design and write programs that use the graphical display found on all modern desktop computers. In addition to providing simple graphical objects such as windows, geometric shapes, and bitmaps, EzWindows provides facilities for introducing event-based programming using the mouse and timers. EzWindows has proven to be extremely popular; it is currently in use at over 200 universities, colleges, and high schools. This paper describes the rationale for EzWindows and its high-level design.
Designing and Developing Teaching System and Office System on the Base of Web

Li Fang

DOI: https://doi.org/10.3969/j.issn.1671-4792.2007.01.094

2007-01-01

Abstract:with the rapid development and wide application of the techniques of internet,communication and multi-media,it has become a inevitable trend to realize office automation and extensive usage of computer.This essay just bring forward the necessity and current problems of popularizing teaching system and office system through the discussion of the procedure of designing and developing teaching System and office system.
Design and Implementation of Virtual Test System Based on LabWindows/CVI

Liang Wang

2009-01-01

Abstract:VxWorks can not provide friendly graphical user interface like Windows system,and developing the graphical interface under VxWorks system has a high degree of difficulty and workload.According to the problems above,a useful method developed by LabWindows/CVI 8.5 is designed to test real-time simulation computer running on VxWorks.The method is successfully applied to the semi-physical simulation test for a certain type of plane,and it is proved useful in checking the I/O system of simulation computer.Quite a practical implementation is provided for diagnosing fault in I/O system for future.
Research on Visual Foxpro Program Designing Teaching Methods for Non-Computer Major Students

Yao-min WANG,Xin-guang LIU,Tian-lian FENG,Hua ZENG,Wen-guang HE,Wen-feng QIU

DOI: https://doi.org/10.3969/j.issn.1007-1423.2013.12.008

2013-01-01

Abstract:Analyzes the disadvantages of the traditional VFP Program Design teaching method for non-computer major students based on the situa-tion that the class hour is constantly decreased and the teaching content is not decreased. Carries on the exploration on teaching methods and means, makes full use of multimedia teaching, case teaching, group teaching, increases the proportion of practice courses and a series aimed at improving the effect of non computer major students VFP Program Design teaching mode and method.
Persistent Objects In The Development Of User Interface

Jj Chen,T Zheng,Gl Zheng

1997-01-01

Abstract:The existence of objects may transcend time and space. Around this property of objects, we present an approach to developing the user interface for control system. In this approach, a user interface is made up of a group of objects. The functions of the user interface are fulfilled by these objects. The objects in a user interface are created in the design phase. Once created, these objects can continue to exist and may move from memory to disk. When needed in use phase, they, as the elements of a user interface, can be loaded from disk and take part in system control.
Design and Implementation of GUI Software Based on Java

Ya-lin ZENG,Bin GUO

DOI: https://doi.org/10.3969/j.issn.1006-2475.2005.10.038

2005-01-01

Abstract:This paper introduces the developed tools of GUI software based on Java and SWT standard layout class, and provides a GUI instance that uses SWT standard layout class.
Development of Trend OCX Based on Visual Basic

区志励,蔡晋辉,张光新

DOI: https://doi.org/10.3969/j.issn.1001-182X.2006.05.014

2006-01-01

Abstract:For the complexity of Trend component in industry control software,this paper presents a trend OCX based on Visual Basic which realized powerable function,has good universalness,extendibility,real time capability,easy to use and can be mebedded into the software.
The Study of Programming Design Methods in Serial Communication Based on C++ Builder 6

余昌盛,许力

DOI: https://doi.org/10.3969/j.issn.1001-4551.2004.07.005

2004-01-01

Abstract:COM is the one of the most important peripheral interfaces in computer; therefore it is significant to do the study of programming design methods in serial communication. In this paper we discuss the four programming design methods of serial communication on C~(++) Builder 6 platform: direct embedded assembler, Windows API functions, MSComm component based on the technique of ActiveX and Third-Party component SPComm. We also give the compared results of the four programming design methods in serial communication, and provide programming examples.
An Architecture Of Adaptive Interface And Its Implementation

G Chen,G Wu,Jx Dong,Zj He

1997-01-01

Abstract:Most recently, attention has focused on adaptive interface in the human-computer interface domain. This paper presents an architecture of adaptive interface and its implementation. In this paper, we first introduce several fundamental concepts of adaptive interface, then an architecture of adaptive interface is designed based on the analysis of these concepts. The structure and technology of this architecture are discussed in detail. This architecture is applied to GS-ICCC, which is an integrated CAD/CAPP/CAM system. This paper also describes some details when implementing this architecture. The adaptive architecture of GS-ICCC has been implemented based on X-Window/Motif environments. It has proved to be highly efficient.
The Special Software Development of Combination Plumbing of Pressure Pipes in AutoCAD Using VB6.0

Tao XIE,Zhi-jiang JIN,Xiang-yu ZHENG,Fei WAMG,Su-juan ZHANG

DOI: https://doi.org/10.3969/j.issn.1001-3997.2006.10.029

2006-01-01

Abstract:The conception and the superiority of combination plumbing of pressure pipes are introduced.Regarded VB6.0 as development environment.,the second development of the special software for combination plumbing of pressure pipes that applies the connect provided by ActiveX Automation is introduced importantly.The technological process and key steps are expounded,and the partial codes and example are given also.The result in application using this special software is favourable.
The Panel Controls a Design Technique in the VB.NET

张艳平,王香玲,陈震

DOI: https://doi.org/10.3969/j.issn.1006-4052.2010.08.017

2010-01-01

Abstract:This text mainly introduces menu of use the VB.NET realization similar VB.NET inside toolbox,and additional code.
The Method from Speech Recognition Component to ActiveX Control

夏俊杰,杨青,赵刚

DOI: https://doi.org/10.3969/j.issn.1674-6236.2012.14.024

2012-01-01

Abstract:When some special development tools such as Authorware are used,the problem that they do not support COM component.In this paper,in order to solve this problem the method from COM component to ActiveX control be introduced.According to the functions and data members of component,the corresponding attributes,methods and events are added in control so that the control can be designed.In this paper,a specific example of speech recognition is used to illustrate the the method and process of transforming COM component into ActiveX control in detail.Finally,the speech recognition control has been called successfully in the Authorware and can identify speech into the text.

Define New Class to Perfect Window's Interface

Interface Passageway of Visual FoxPro and Microsoft Word

Interface Technique of Real-time Database Based on OPC and Its Application

Methods of Printing out Reports of Virtual Instruments Based on ActiveX

The Design of Host-Computer Software for the EPA Control Net

The fuzzy PID control based on the ActiveX and its application in the supervisory control system

Design and Realization of Application Interface Between Real-Time Database and Industrial Process Control System

Study on the Real-Time Serial Communication Based on Windows

The Research and Realization on Blackboard Function of Mechanical Layout CAI Software

The Design of EzWindows: A Graphics API for an Introductory Programming Course

Designing and Developing Teaching System and Office System on the Base of Web

Design and Implementation of Virtual Test System Based on LabWindows/CVI

Research on Visual Foxpro Program Designing Teaching Methods for Non-Computer Major Students

Persistent Objects In The Development Of User Interface

Design and Implementation of GUI Software Based on Java

Development of Trend OCX Based on Visual Basic

The Study of Programming Design Methods in Serial Communication Based on C++ Builder 6

An Architecture Of Adaptive Interface And Its Implementation

The Special Software Development of Combination Plumbing of Pressure Pipes in AutoCAD Using VB6.0

The Panel Controls a Design Technique in the VB.NET

The Method from Speech Recognition Component to ActiveX Control