Preparation and Properties of Foam Metal and Its Application in Catalysis

Wenfeng Shangguan

2006-01-01

Abstract:Foam metal,as a new-type functional material,has unique characteristics and structure.The preparation techniques,properties of foam metal and its application in catalytic reaction were reviewed.Preparation techniques for foam metal include forming,sintering,casting and deposition.Foam metal can be used as both carrier and catalyst.

What problem does this paper attempt to address?

Preparation of Metal Foam Using Casting Technology

WANG Hong-wei,LI Qing-fen,LI Zhi-wei,ZHU Zhao-jun,WEI Zun-jie

2007-01-01

Abstract:Metal foam is an integrated structural and functional material which has mechanical properties,thermoelectric performance,acoustics performance.Due to its huge application prospect,metal foam has attracted much more attentions in industry increasingly,especially in automobiles and aerospace field.There are many ways to produce metal foam.Compared with other fabrication methods,melt-based casting methods has the advantages of high output,relatively inexpensive and easy production,thus it has been widely investigated and some metal foams have been brought about industrialization.Several casting methods adopted in the research of metal foam are reviewed in detail,and the advantage and disadvantages are pointed out.
Preparation of 3D electrocatalysts and catalysts for gas-phase reactions, through electrodeposition or galvanic displacement

M. Musiani,S. Cattarin,S. Cimino,N. Comisso,L. Mattarozzi,L. Vázquez-Gómez,E. Verlato

DOI: https://doi.org/10.1007/s10800-015-0808-1

IF: 2.925

2015-02-28

Journal of Applied Electrochemistry

Abstract:Metal foams are interesting supports for the preparation of electrocatalysts and catalysts for gas-phase processes, like partial and total low-temperature oxidation of hydrocarbons and other chemicals, owing to their large surface area, electrical conductivity, efficient mass and heat transfer, mechanical strength and resistance to oxidation. High catalytic activity in specific processes can be imparted to metal foams by the deposition of appropriately chosen noble metal nanoparticles. Deposition may be achieved electrochemically or through spontaneous deposition processes based on galvanic displacement reactions in which a noble metal displaces a less noble one. In the materials prepared by these methods, noble metal nanoparticles are in direct electrical contact with metal foams, so cyclic voltammetry may be effectively used to determine their surface area, a parameter of primary importance in heterogeneous catalysis. These features are illustrated by reviewing the preparation, characterization and catalytic testing of various noble-metal-modified Ni and Fe–Cr–Al alloy metal foams, highlighting advantages and limitations of the proposed methods, as compared with state of the art approaches.

electrochemistry
Synthesis of Micro- and Mesoporous Carbon Foams with Nanodispersed Metals for Adsorption and Catalysis Applications

Roberto García,Elena Rodríguez,María A. Díez,Ana Arenillas,Sara F. Villanueva,Natalia Rey-Raap,Cristóbal Cuesta,María A. López-Antón,M. Rosa Martínez-Tarazona

DOI: https://doi.org/10.3390/ma16041336

IF: 3.4

2023-02-05

Materials

Abstract:This work focuses on carbon foams, whose peculiarity is a predominant open macroporous cellular network that can be provided with tailored texture and morphology by the modification of the preparation process. The goal was to obtain macroporous carbonaceous structures capable of being activated by following a simple thermo-foaming procedure using a few reagents. With this purpose in mind, carbon foams with different textural properties were synthesized from sucrose using two foaming processes: at atmospheric pressure and in a pressurized reactor. Iron and silver nitrates added to sucrose gave rise, after carbonization, to materials with iron oxides and elemental silver particles nano-dispersed in the carbon matrix and promoted microporosity in both cases and mesoporosity in the case of iron nitrate. Iron nitrate also catalyzes the graphitization of the carbon material during carbonization. All these findings show the potential of sucrose thermo-foaming process as a viable and sustainable path to produce versatile carbon materials, capable of being used in various applications.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Porous Metals: Research Advances and Applications

陈祥,李言祥

DOI: https://doi.org/10.3321/j.issn:1005-023x.2003.05.002

2003-01-01

Abstract:Methods for manufacturing metal foams and other porous metallic structures are reviewed. Liquid metal can he foamed directly by injecting gas or gas-releasing blowing agents,or by solid-gas eutectic solidification. Investment casting, infiltration under pressure or vacuum, spray forming, and melting of powder compacts which contain a blowing agent could also be used for making metal foams. The sintering method,and metal powder slurry foaming can make metal foams even in the solid state. And electro-deposition and metal vapour deposition could also be applied to create highly porous metallic structures. Finally ,various applications of metal foams are discussed.
Recent research progress of foam metals welding: a review

Mengnan Feng,Liang Ren,Ziyao Wang,Dequan Meng,Shuo Wang,Peng Wang

DOI: https://doi.org/10.1007/s00170-023-11709-2

IF: 3.563

2023-06-16

The International Journal of Advanced Manufacturing Technology

Abstract:The unique porous structure of foam metal imparts a variety of advantageous properties, including low weight, reduced density, extensive specific surface area, efficient sound and energy absorption, exceptional thermal insulation, effective electromagnetic shielding, and outstanding electrochemical behavior. As a result, foam metals are deemed crucial for both functionalizing structural materials and structuring functional materials, finding widespread application in electronics, chemicals, machinery, and aerospace sectors. Currently, the welding of foam metals is a subject of significant interest and ongoing research, with numerous studies aimed at refining the welding process. This review provides an overview of the current state-of-the-art research on foam metal welding and evaluates the feasibility of different welding techniques from a methodological perspective. A comparison of the efficiency and efficacy of various welding approaches in the preparation of foam metal joints is performed to highlight their strengths and limitations. Finally, this paper summarizes the current developments in foam metal welding and provides insights into the future trajectory of this field.

engineering, manufacturing,automation & control systems
Flexible and Hierarchical Metal–Organic Framework Composites for High‐Performance Catalysis

Ning Huang,Hannah Drake,Jialuo Li,Jiandong Pang,Ying Wang,Shuai Yuan,Qi Wang,Peiyu Cai,Junsheng Qin,Hong-Cai Zhou

DOI: https://doi.org/10.1002/anie.201803096

2018-01-01

Angewandte Chemie

Abstract:The development of porous composite materials is of great significance for their potentially improved performance over those of individual components and extensive applications in separation, energy storage, and heterogeneous catalysis. Now mesoporous metal-organic frameworks (MOFs) with macroporous melamine foam (MF) have been integrated using a one-pot process, generating a series of MOF/MF composite materials with preserved crystallinity, hierarchical porosity, and increased stability over that of melamine foam. The MOF nanocrystals were threaded by the melamine foam networks, resembling a ball-and-stick model overall. The resulting MOF/MF composite materials were employed as an effective heterogeneous catalyst for the epoxidation of cholesteryl esters. Combining the advantages of interpenetrative mesoporous and macroporous structures, the MOF/melamine foam composite has higher dispersibility and more accessibility of catalytic sites, exhibiting excellent catalytic performance.
Design and Application of Foams for Electrocatalysis

Wenxin Zhu,Rong Zhang,Fengli Qu,Abdullah M. Asiri,Xuping Sun

DOI: https://doi.org/10.1002/cctc.201601607

IF: 4.5

2017-01-01

ChemCatChem

Abstract:Developing low cost and efficient anode and cathode materials toward electrocatalysis are regarded as one of the most desirable yet challenging research directions, which are intimately related to the pressing energy, environmental and human health issues. Currently, 3D foam (such as Ni foam, Cu foam, and graphene foam) based heterogeneous catalysts have been intensively explored for actively catalyzing the electrode reactions. Their inherent characteristics of stereonetwork structure, high specific area and large pore volume not only provide better mass transport of reactants to electrode surfaces, but also pave 3D electron transport pathways. Herein, recent significant progress and rational design of foambased electrocatalysts are reviewed. In addition, some insights into current challenges and future directions of foams for efficient electrocatalysis are proposed and discussed.
The Newest Developments of Foam Materials

Changsong Dai,Liang Zhang,Dianlong Wang,Xinguo Hu

DOI: https://doi.org/10.3321/j.issn:1002-185X.2005.03.001

2005-01-01

Rare Metal Materials and Engineering

Abstract:Methods of preparing foam materials, such as aluminium foam, titanium foam, silicon foam and lead foam, and how to control the composition and the porosity in order to prepare materials of different performances were presented. Excellent properties of foam materials, which were applied in auto industry, body in-planting material, optical material, micro-electronics, computer and lead-acid battery, etc., were emphatically introduced. Spacious market outlook was also previewed.
Development Status and Preparation Technology of Copper Foams

Jun LU,Donghui YANG,Weiping CHEN,Jianqing CHEN,Lei WANG,Jinghua JIANG,Aibin MA

DOI: https://doi.org/10.14158/j.cnki.1001-3814.2017.06.003

2017-01-01

Abstract:The preparation methods for copper foams were reviewed, which include electrodeposition method, unidirectional solidification method, pressure infiltration technique, powder metallurgy technique, dealloying technique and loose sintering technique. Some application fields for copper foam were introduced.
Preparation Technology and Application Status of Foam Aluminum Material

Mengjiao ZHU,Suhong ZHOU,Qudong WANG,Bing YE,Haiyan JIANG,Wenjiang DING

DOI: https://doi.org/10.14158/j.cnki.1001-3814.2017.12.006

2017-01-01

Abstract:As a new kind of structural and functional material, because of its unique structure and excellent performance, foam aluminum was widely used in auto manufacturing, rail transition, aerospace, architecture and other fields. The common preparation technologies of foam aluminum and research trend were viewed. The application status of foam aluminum and its composite were introduced. Finally, the future development trend of foam aluminum was looked forward.
Special processing technology of foam metal materials

Sun Zhen-zhong

Abstract:Foam metal material is a new functional material,and its structural parts has many unique properties.Start discussion in the application of foam metal materials,especially carry out experiments and analysis base on the processing foam metal materials using special processing way such as WEDM,water jet and laser,and get some conclusions.

Engineering,Materials Science
Development of New Foaming Agent for Metal Foam

Takashi Nakamura,Svyatoslav V. Gnyloskurenko,Kazuhiro Sakamoto,Aleksandra V. Byakova,Ryoichi Ishikawa

DOI: https://doi.org/10.2320/matertrans.43.1191

2002-01-01

MATERIALS TRANSACTIONS

Abstract:The study of metallic foams has become attractive to researchers interested in both scientific and industrial applications. The different production methods have not been widely utilized because of difficult process control and high production costs. A new easily-available agent for metal foaming, calcium carbonate, is suggested in this work. An established ion-exchange method was employed for a novel purpose—the coating of calcium carbonate powder with fluoride for wettability enhancement. Effect of coating was considered by the examination of wetting behavior of coated and uncoated CaCO3 by the Al melt. It was determined that coated carbonate produced metallic foam with density comparable to that of samples treated by titanium hydride (∼ 1×103 kg·m−3) and much less then the density of samples obtained by uncoated carbonate (1.7×103 kg·m−3). It was also observed that coated carbonate ensured aluminum foam with smaller pores (1.1×10−3 m) than when the conventional foaming agent, titanium hydride, is used (1.8×10−3 m). The present study shows that calcium carbonate is highly applicable to foamed metal production.

materials science, multidisciplinary,metallurgy & metallurgical engineering
Preparation and Applications of Foam Ceramics

Mengqi Wang,Shuqiong Xu

DOI: https://doi.org/10.1088/1755-1315/186/2/012066

2018-10-11

IOP Conference Series: Earth and Environmental Science

Abstract:As a new type of porous material, foam ceramics have properties such as the high strength and hardness, the good plastic toughness, corrosion resistance and the high temperature resistance. This paper summarizes the preparation methods of foam ceramics such as organic foam impregnating method, foaming method, freeze-drying method, etc. The paper also introduces development status of foam ceramics at home and abroad as well as the application of foam ceramics in environmental protection, metal casting, construction and other fields. Finally, the current situation and developments of foam ceramics are discussed.
Preparation and Application of Ordered Mesoporous Metal Oxide Catalytic Materials

Zihao Fu,Guodong Zhang,Zhicheng Tang,Haitao Zhang

DOI: https://doi.org/10.1007/s10563-019-09288-y

2019-11-26

Catalysis Surveys from Asia

Abstract:The ordered mesoporous metal oxides as catalytic carrier or active center have been reported by many literatures. The large specific surface area and ordered mesoporous structure had caused great concern in the field of catalysis. In the catalytic reaction, the ordered mesoporous materials had great mechanical properties and the active centers had strong interaction between each other. There were obviously advantages of these ordered mesoporous materials than bulk materials or routine nano-materials in the catalytic conversion of volatile organic compound, CO, NOx and other polluting gases. At present, researchers prepared a variety of ordered mesoporous metal oxides by different synthetic methods. Based on the analysis and summary of the literature, this paper briefly reviewed the preparation methods and application of ordered mesoporous metal oxide catalysts and the prospect of future development is worth expecting.

chemistry, physical
Copper Foam Preparation by Electrodeposition

张秋利,杨志懋,丁秉钧

DOI: https://doi.org/10.3969/j.issn.2095-1744.2009.01.008

2009-01-01

Abstract:The copper foam is prepared by pretreatment,electrodeposition and sinter-reducing with polyurethane as frame foundation,the morpholgy of the foam in processing is observed by SEM,and the chemical property of the product is determined.It is indicated by the results that the prepared copper foam is of well distributed three-dimension grid structure and high porosity,and excellent tensile strength and toughness.
Self‐Standing Metal Foam Catalysts for Cathodic Electro‐Organic Synthesis (Adv. Mater. 9/2024)

Pavel Moreno‐García,María de Jesús de Gálvez‐Vázquez,Tobias Prenzel,Johannes Winter,Liliana Gálvez‐Vázquez,Peter Broekmann,Siegfried R. Waldvogel,María de Jesús de Gálvez‐Vázquez

DOI: https://doi.org/10.1002/adma.202470070

IF: 29.4

2024-03-03

Advanced Materials

Abstract:Self‐Standing Metal foam Catalysts In article number 2307461, Pavel Moreno‐García, Peter Broekmann, Siegfried R. Waldvogel, and co‐workers established self‐standing metal foam catalysts for the cathodic electro‐organic synthesis. The strongly enhanced surface and specific phases enable a tremendously enhanced performance in preparative electro‐synthesis compared to planar electrodes.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Preparation of complex shaped aluminum foam by a novel casting-foaming method

Guangzhao Yuan,Yanxiang Li,Xu Zhou,Lei Hu

DOI: https://doi.org/10.1016/j.matlet.2021.129673

IF: 3

2021-06-01

Materials Letters

Abstract:A novel casting-foaming (CF) method based on melt foaming route is proposed in this study to prepare aluminum foam parts with complex shape. A foamable and flowable precursor alloy melt (PAM) was prepared by dispersing pre-oxidized TiH2 particles into a thickened Al-Si-Mg eutectic alloy melt, whose liquidus temperature is compatible with the decomposition temperature of pre-oxidized TiH2. Afterwards, the PAM was poured into a heated mold and foamed to fill the mold cavity, followed by solidification. Particle distribution in the precursor and shaping capacity of the CF method were examined. Results show that TiH2 particles can be well dispersed in the precursor without aggregation. The shaped foam parts with submillimeter scale of arc radii at angle (45°, 60° and 90°) tips were obtained, showing an extreme filling capacity of the CF method.

materials science, multidisciplinary,physics, applied
Preparation and Electrocatalysis Application of Pure Metallic Aerogel: A Review

Ran Zhang,Yan Zhao

DOI: https://doi.org/10.3390/catal10121376

IF: 3.9

2020-11-25

Catalysts

Abstract:Nanomaterials are widely used in electrocatalysts due to their quantum size effect and high utilization efficiency. There are two ways to improve the activity of nanoelectrocatalysts: increasing the number of active sites and improving the inherent activity of each catalytic site. The structure of the catalyst itself can be improved by increasing the number of exposed active sites per unit mass. The high porosity and three-dimensional network structure enable aerogels to have the characteristics of a large specific surface area, exposing many active sites and bringing structural stability through the self-supporting nature of aerogels. Thus, by adjusting the compositions of aerogels, the synergetic effect introduced by alloy elements can be utilized to further improve the single-site activity. In this review, we summarized the basic preparation strategy of aerogels and extended it to the preparation of alloys and special structure aerogels. Moreover, through the eight electrocatalysis cases, the outstanding catalytic performances and broad applicability of aerogel electrocatalysts are emphasized. Finally, we predict the future development of pure metallic aerogel electrocatalysts from the perspective of preparation to application.

chemistry, physical
Self‐Foaming as a Universal Route for Fabricating Liquid Metal Foams and Hollow Particles

Mingkuan Zhang,Li Liu,Chenglin Zhang,Hao Chang,Pengju Zhang,Wei Rao

DOI: https://doi.org/10.1002/admi.202100432

IF: 5.4

2021-05-26

Advanced Materials Interfaces

Abstract:The porous or hollow structure constructed by involving gas inside the liquid metal or liquid metal particles can reduce the density and increase the reaction sites. However, there is no universal route that can place bubbles in liquid metal from macroscale to microscale to prepare liquid metal foams or liquid metal hollow particles. Based on the oxidation reaction of Ga2O, self-foaming as a general route for fabricating liquid metal foams and hollow particles is proposed. Those foams and hollow particles only consist of metal and its oxide, which can avoid the reaction between the liquid metal and the additives to obtain stable properties. The low density (0.6 g cm−3 for foams and 0.71 g cm−3 for hollow particles), the high conductivity (over 105 S m−1), and the low melting point (≈30.5 °C) are displayed. Besides, those foams and hollow particles can be freely and subjectively modified by other functional particles, such as Fe, Ni, and Si. Those functional foams are used in electromagnetic shielding and the 3D swarming behaviors of liquid metal hollow particles are realized under a magnetic field.

materials science, multidisciplinary,chemistry
An Elastic Monolithic Catalyst: A Microporous Metalloporphyrin-Containing Framework-Wrapped Melamine Foam for Process-Intensified Acyl Transfer

Keyi Wu,Jia Guo,Changchun Wang

DOI: https://doi.org/10.1002/anie.201600891

2016-01-01

Abstract:The advent of conjugated microporous polymers (CMPs) has had significant impact in catalysis. However, the presence of only micropores in these polymers often imposes diffusion limitations, which has resulted in the low utilization of CMPs in catalytic reactions. Herein, the preparation of a foam-supporting CMP composite with interconnective micropores and macropores and elastic properties is reported. Metalloporphyrin-based CMP organogels are synthesized within the melamine foam by a room-temperature oxidative homocoupling reaction of terminal alkynes. Upon drying, the CMP-based xerogels tightly wrap the framework skeletons of the foam, while the foam cells are still open to allow for the preservation of elasticity and macroporosity. Such a hierarchical structure is efficient for acyl transfer, facilitates substrate diffusion within interpenetrative macropores and micropores, and could be used to intensify catalytic processes.

Preparation and Properties of Foam Metal and Its Application in Catalysis

Preparation of Metal Foam Using Casting Technology

Preparation of 3D electrocatalysts and catalysts for gas-phase reactions, through electrodeposition or galvanic displacement

Synthesis of Micro- and Mesoporous Carbon Foams with Nanodispersed Metals for Adsorption and Catalysis Applications

Porous Metals: Research Advances and Applications

Recent research progress of foam metals welding: a review

Flexible and Hierarchical Metal–Organic Framework Composites for High‐Performance Catalysis

Design and Application of Foams for Electrocatalysis

The Newest Developments of Foam Materials

Development Status and Preparation Technology of Copper Foams

Preparation Technology and Application Status of Foam Aluminum Material

Special processing technology of foam metal materials

Development of New Foaming Agent for Metal Foam

Preparation and Applications of Foam Ceramics

Preparation and Application of Ordered Mesoporous Metal Oxide Catalytic Materials

Copper Foam Preparation by Electrodeposition

Self‐Standing Metal Foam Catalysts for Cathodic Electro‐Organic Synthesis (Adv. Mater. 9/2024)

Preparation of complex shaped aluminum foam by a novel casting-foaming method

Preparation and Electrocatalysis Application of Pure Metallic Aerogel: A Review

Self‐Foaming as a Universal Route for Fabricating Liquid Metal Foams and Hollow Particles

An Elastic Monolithic Catalyst: A Microporous Metalloporphyrin-Containing Framework-Wrapped Melamine Foam for Process-Intensified Acyl Transfer