Abstract:In this study, open-cell copper foam with completely interconnected sphere pores was prepared by a modified sintering–dissolution process using a preformed calcium chloride template skeleton as space holder. Compared with the traditional foaming process method, the open-cell copper foam prepared by this method has fewer impurities and better surface morphology. In addition, the pore distribution can be controlled by adjusting the distribution of calcium chloride particles in the skeleton. The compression performance, airflow resistance, and filtration performance of the prepared open-cell copper foam were studied. The results show that with the increase in porosity, the bearing capacity of open-cell copper foam decreases, but the width of the stress platform increases. The prepared open-cell copper foam exhibits excellent energy absorption efficiency, reaching nearly 90% at a porosity of 85%. When the porosity is 85%, the static airflow resistance of the structure is as high as 9 KPa·s·m−2. Moreover, the structure has a filtration efficiency of more than 90% as the filtration thickness exceeds 20 mm, which demonstrates the excellent filtration ability. Such open-cell copper foam shows multi-functional potential as an impact damper, sound absorber, and impurity filter.

Development Status and Preparation Technology of Copper Foams

Copper Foam Preparation by Electrodeposition

Preparation of Metal Foam Using Casting Technology

Preparation of high porosity copper foam by polyurethane sponge impregnation method

Preparation Technology and Application Status of Foam Aluminum Material

Recent research progress of foam metals welding: a review

Fabrication, Structure and Property of Copper Foam

Preparation and Properties of Foam Metal and Its Application in Catalysis

The Newest Developments of Foam Materials

Preparation and Heat Dissipation Properties Comparison of Al and Cu Foam

Preparation and characterization of copper powder particles

Bonding Process of Copper Foam-Silver Composite and Performance Characterization of the Joint

A new sintering method for fabrication of open-cell metal foam parts

Multifunctional Open-Cell Copper Foam with Sphere Pores by a Modified Sintering–Dissolution Process

Development of Copper Foam-based Composite Catalysts for Electrolysis of Water and Beyond

Preparation and Applications of Foam Ceramics

Porous Metals: Research Advances and Applications

Research status and development trend of preparation technology of ceramic particle dispersion strengthened copper-matrix composites

Enhancing Wicking Microflows in Metallic Foams

Experimental Investigation on the Solidification Behavior of Phase Change Materials in Open-Cell Metal Foams

New Preparation Technology of Copper Matrix Composites Reinforced by Short Carbon Fibers