Adsorption of methyl orange and methylene blue from aqueous solutions on pure bentonite: statistical physical modeling provides an analytical interpretation
Ikram Daou,Younes Dehmani,Hamou Moussout,Dison S. P. Franco,Jordana Georgin,Mustapha El Bakkali,Mustapha Tahaikt,Abdelillah Shaim,Omar Zegaoui,Sadik Abouarnadasse,Noureddine El Messaoudi
DOI: https://doi.org/10.1007/s10661-024-13239-0
IF: 3.307
2024-10-17
Environmental Monitoring and Assessment
Abstract:This study investigates the adsorption of methylene blue (MB) and methyl orange (MO) dyes from aqueous solutions using purified Moroccan bentonite, being mainly composed of silica and alumina, in the form of quartz and cristobalite. The temperature controls the adsorption capacity for the kinetics, increasing 5.08% (from 295.1 to 310.1 mg/g) for the MB and 55.47% (from 86.8 to 134.9 mg/g) for the MO. It was discovered that the pseudo-second-order model, with a low Bayesian criterion indicator of 12.72 and R 2 adj > 0.996, was the best suitable for explaining both systems. The adsorption isotherm, experimental data indicate that both systems follow the Langmuir isotherm. At lower temperatures, 298.15 K 1.22 molecules are adsorbed per site. However, at a higher temperature of 328.15 K, the number of molecules is less than a unit of 0.68. As for MO, the number of molecules remains above 1.4 per site for all the temperatures studied. The endothermic nature of the system is indicated by the observation that the adsorption energy tends to grow for both systems: for the MB, it increases from 18.85 to 21.26 kJ/mol, and for the MO, it increases from 14.83 to 19.01 kJ/mol. Last, thermodynamic functions indicate that maximum entropy is reached around the half-concentration saturation at 25 and 124 mg/L, which is the maximum energetic concentration of the system. The same results were obtained for Gibbs free energy, where the maximum energy found was − 5.39 × 10 −18 kJ/mol for the MB and − 1.99 × 10 −18 kJ/mol for the MO at 328.15 K.
environmental sciences