Energy-saving Technology for Lighting

Huai‐Ning Wu

2010-01-01

Abstract:The paper explains how to improve the power efficiency of lighting through rational selection and use of lighting devices and the use of energy-saving devices.

What problem does this paper attempt to address?

Research on Load Characteristics of Energy-saving Lamp and LED Lamp

Yingying Tang,Qian Chen,Ping Ju,Yuqing Jin,Fu Shen,Beibei Qi,Zhuolin Xu

DOI: https://doi.org/10.1109/powercon.2016.7753932

2016-01-01

Abstract:It is urgent for modern society to save energy and protect environment. But the efficiency of traditional lighting equipment which occupies a rather high proportion of total electric load is very low. Now, they are more and more instead by power electronics based devices, such as energy-saving lamps or LED lamps. For the different characteristics from that of traditional devices, the new kind of lighting equipment may have uncertain influence to power grid. Firstly, their topologies and control schemes are studied and analyzed. Then, the general models, which are suitable for simulation analysis, are proposed. After that, the simulation study and physical experiment are carried on respectively. It is revealed and manifested that the characteristics of both energy-saving lamp and LED lamp are quite different from that of traditional lamps, and may have adverse impact on the safety and stability of power grid.
Study of Energy Efficient with Intelligent Traffic and Illuminating Control System

Chen Hong,Han Junfei,Gu Xiaowei,Guo Qing,Lu HuiFen,Shi JianJiang

DOI: https://doi.org/10.1109/icst47872.2019.9166383

2019-01-01

Abstract:In order to realize the energy efficient on the traffic and illuminating lights in city, the Intelligent Traffic and Illuminating Control System is proposed in this paper. The working criteria of real-time monitoring and intelligently control are designed. The key technologies including Internet of Things with power line communication by LonWorks technology and the piezoelectric sensor on site detecting are utilized in the research. The traffic density is detected by piezoelectric sensor and is "told" to LonWorks network to adjust the traffic red lamp lighting time and the illuminating time. The working flow of the Intelligent Traffic and Illuminating Control System has been verified to ensure the sufficient capability by Cp 1.72 and Cpk 1.60 within Statistical Process Control. The Energy efficient is achieved by 35.71% electrical energy reduction and 66.67% fuel consumption reduction on the energy saving and the carbon oxide emission reduction, which demonstrates that the Intelligent Control System achieves effective and valuable real-time monitoring and intelligently control with superiority of the energy efficient compared to the previous reports.
Discussion on Energy-saving for Emergency Lighting

Xu Hua,Zhong Xin

DOI: https://doi.org/10.3969/j.issn.1729-1275.2011.03.011

2011-01-01

Abstract:The paper expounds the requirements of code for emergency lighting and puts forwards the energy-saving method of light source, lamps & lanterns and control system.
Discussion on Energy Saving of Lighting Control

Xu Hua

DOI: https://doi.org/10.3969/j.issn.1671-9506.2007.10.029

2007-01-01

Abstract:Green lighting is problems been considered all over the world today, and lighting control is one of the important measures for lighting energy saving. The paper introduces some measures and key-point for lighting control, and analyzes the effect of control in light- ing energy saving.
Energy Saving Intelligent LED Lighting System Design for Indoor Lighting

HUANG Lingchen,ZHONG Qing,WANG Xiaoping,WANG Liqiang

DOI: https://doi.org/10.3969/j.issn.1005-5630.2011.05.014

2011-01-01

Abstract:Aiming at the severe problem of energy shortage nowadays,a illumination system with the combination of solar energy and LED source in order to reduce consumption of indoor lighting is put forward.In condition of large amount of ambient light,the solar cells can supply power for both battery charging and system operation;in condition of little ambient light,the system can be charged by the battery directly.Besides,this system has USB interface through which we can charge the battery in case of long-term low light intensity.This system can realize automatic illumination adjustment and keep the stable illumination in working platform,thus,provide the best luminous environment for long-term white collar workers.Electric power will be largely saved with the automatic illumination adjustment and solar energy charging.
Smart lights technology used in library energy-saving

RongMao Zheng,Guixiong Liu,YueHua Xu

DOI: https://doi.org/10.4028/www.scientific.net/AMR.773.227

2013-01-01

Advanced Materials Research

Abstract:Government attaches great importance to energy saving issue has caused. Library as densely populated public places, its energy consumption is 5 to 15 times the average residential. Many factors involved in libraries energy saving, such as air-conditioning systems, lighting systems and other electrical systems. The library has great potential for energy saving. This paper studies how to apply the smart lights technology in the library energy-saving. Based on the analysis of existing library monitoring system, we propose a possible smart lights method which will be used in the library energy-saving. Effective methods and strategies of smart light energy-saving were researched. Smart LED lights and wisdom lamp holders, hardware and software are designed and implemented which was used in the library energy-saving. The smart LED lights were used in library study room lighting reconstruction. Practice shows that the energy-saving of new lighting system effective. Theoretically for the new technology could bring more than 30% of the energy-saving effect. © (2013) Trans Tech Publications, Switzerland.
The Energy-Saving Unit about Illumination Based on Normal Lighting System

Yang Guang

DOI: https://doi.org/10.3969/j.issn.1008-5521.2008.04.010

2008-01-01

Abstract:Normal lighting system is used widely in public lighting.Because of its intrinsic defect,It causes the problem of uninterrupted lighting universally and squander a large number of electrical energy.Based on normal lighting system and situation,the article gives the design and appliance on energy-saving unit about illumination.The unit has the function of separate adjustable set value of illumination.The effect of energy-saving can be obtained by using the unit.
Present Application Situation and Researches on Energy Saving Conservation Technology for Road Lighting

Wang Xiaoyuan,Qi Weigui

DOI: https://doi.org/10.3969/j.issn.1004-440X.2010.01.003

2010-01-01

Abstract:Along with the rapid development of the community economy and city construction,urban lighting has been one of the chief signs that represent the urban civilization and modernization level.So it is an increasing concern and its scale has been steadily enlarged.Under this trend,the electric energy expenditure has been racing up.Because urban lighting energy consumption is one of the application areas of power-saving technology,it has aroused extensive concern in recent years.In this paper,the present application situation and researches on the energy conservation technology of urban lighting in our country are introduced in detail.Finally,make a summary of the problems on the economization on electricity in illumination and the solution to these problems.
A Intelligent Energy Saver for Lighting System with a Novel Converter Circuit Topology

DU Yi,ZHAO Rong-xiang,YANG Huan

DOI: https://doi.org/10.3969/j.issn.1000-100x.2007.10.009

2007-01-01

Abstract:A novel single-phase AC/DC/AC converter with a reduced number of devices using one IPM module is in-troduced.Based on this new circuit,the intelligent energy saver for lighting system has improved power quality in Grid which was deteriorated.The main circuit,operation,analysis,control methods and a simulation in Matlab/Simulink are illus-trated and given.Experiment results show the effectiveness of this system.
Intelligence Street Light System of Saving Energy Based on WCN

黎洪生,刘苏敏,胡冰,张卓敏

DOI: https://doi.org/10.3969/j.issn.1000-3428.2009.14.066

2009-01-01

Abstract:Aiming at the characteristic of the lighting energy equipment,this paper puts forward a kind of energy-conserving method to combine Wireless Communication Network(WCN) with control of the street light.It makes use of wireless way to transmit to send and accept the information of controlling,adopts variable reactor energy-conservation to control technical design and develop street light energy-conservation to fit,probes into and uses controlling algorithms fuzzily,optimizes the energy-conserving question that the street light operates with the electricity,and sets up corresponding fuzzy control system.Result proves the system is systematic and very effective in energy consumption for saving the street light illumination.
LEDs: A Promising Energy-Saving Light Source for Road Lighting

Fusheng Li,Dahua Chen,Xianjie Song,Yuming Chen

DOI: https://doi.org/10.1109/appeec.2009.4918460

2009-01-01

Abstract:Rising demand with diminishing reserves of oil and gas spread the energy crisis all over the world. Renewable energy and efficiency technology are the keys to resolve the energy crisis. As the improvement in luminous efficacy, LEDs have been an energy-saving choice for general illumination and road lighting. This paper made a comparison between LEDs system and HPS system for road lighting to evaluate which one is more energy efficient and discussed some factors may influence the efficiency of LEDs system and HPS system, such as mesopic vision, dimming, color of illumination. Though the difference in total luminaire efficacy was not that much in favor of the LEDs, LEDs show a promising prospect in the near future because of the dramatic improvement in luminous efficacy.
Energy Saving Research on Building Lighting System

Bao DING,Jin JIANG

DOI: https://doi.org/10.3969/j.issn.1002-6339.2005.02.012

2005-01-01

Abstract:The composition,basic functions and working process of building lighting voltage regulation system is described in this paper.Based on compensation concept,the principle of this system is analyzed by utilizing the controlled voltage source and controlled current source model of a transformer.The optimal power supply voltage of light fitting is put forward according to its characteristics of luminance and life in building lighting system.Using the optimal power supply voltage for lighting in the building and time-varying voltage regulation scheme outside,the energy-saving ratio is calculated,and it's up to 22.3%.
Applications of Energy Management System in Green Buildings

WU Bo,CHEN Liang,SUN Chao

DOI: https://doi.org/10.16618/j.cnki.1674-8417.2012.08.018

2012-01-01

Abstract:The paper introduces the definition of green building and energy management system,analyzes the energy saving problems of intelligent building,proposes that the energy management system should be divided into intelligent home application control,renewable energy utilization and building energy consumption monitoring and so on.It can promote the popularization of building energy efficiency and green building.
Application of the Intelligent Lighting Control in the Office

Yuan YAO,Yi-qun PAN,Zhi-zhong HUANG

DOI: https://doi.org/10.3969/j.issn.1673-7237.2011.12.015

2011-01-01

Abstract:In order to reduce the electricity consumption of the lighting system,one of the most effective ways is improving the efficiency of lighting sources and relative auxiliaries.This method is already fully developed and costs little.With proper control system,artificial lighting system could work in an even more effective way,because of utilizing free daylight and avoiding eventually behavioral wastes,then the aim energy-saving will be reached.The application of intelligent control system in the fluorescent lamps lit office space is introduced.
Summarization about Electronic Energy Saving Lamps

李辉群,周春艳,姚豪,赵元生,冯自平

DOI: https://doi.org/10.3969/j.issn.1002-6339.2004.02.025

2004-01-01

Abstract:This paper introduces the concepts and principle of energy saving lamps,and some problems about the market of this products.
The Energy-Saving Modification Program of Lighting Equipment Based on the Economic Evaluation

Yuan Yang,Wei-hua Li,Xin-zheng Zhang,Chu-qi Yang,Dong Lv,Hai-qiang Liao,Lin Yang

DOI: https://doi.org/10.5815/ijcnis.2011.01.05

2011-01-01

International Journal of Computer Network and Information Security

Abstract:Considering many lighting energy-saving modification programs have the phenomenon of diseconomy; this paper takes into account economic evaluation to solve this problem.The optimal program of total energy-saving benefit will be found under the limited investment according to economic evaluation of the price, life span and power consumption of lighting equipments.Firstly, the benefit ratio will be used to evaluate on the necessity of modification, and get the order.If the biggest benefit ratio exists in different equipments simultaneously, the better one will be selected in terms of relative payback period of investment.And on the basis, the relative remaining time is innovatively introduced into economic evaluation to determine the locations of modification.Then an example from a factory can prove that the program is workable.
Wireless Intelligent Control Design for Energy-saving Road Lighting System

Zhang Zhiming,Zhuang Weilin,Yu Youling,Xu Weisheng,Wang Cuixia,Lu Jicheng,Tan Xuejun

DOI: https://doi.org/10.3969/j.issn.1004-440X.2010.02.013

2010-01-01

Abstract:According to the real operation characteristics of road lighting system,several solutions for energy-saving lighting are introduced and discussed. On the premise of reliable energy-saving target,appropriate intelligent control strategy and wireless network topology,used for road lighting system,are designed and analyzed,which is developed with the low power wireless communication technology. The main structure,hardware solution and software scheme of the system,integrated with node RTU/LCU ( Remote Terminal Unit/Light Control Unit) implementation,are proposed and analyzed in detail. The discussion results suggested that,the proposed scheme is feasible for energy-saving road lighting system.
Lighting Design Approaches with Low Carbon Emissions

Gu Lingling,Yuan Qiao

DOI: https://doi.org/10.3969/j.issn.1004-440X.2012.02.016

2012-01-01

Abstract:Lighting design with low carbon emissions indicates that emphasis in this field has deepened from energy efficiency into resource saving,energy consumption reducing,and greenhouse gas emissions decreasing.Based on this particular point,this paper stresses out several technical methods,among which utilization of natural light in buildings is top priority.Sunshading equipments and light pipes to guide natural light into buildings should be widely developed to reduce reliance of building operation on traditional energy.Research and development into high efficient lighting equipments and multi-purpose lighting control systems is also fully required.Moreover,this paper emphasizes the importance of specific standards of lighting design with low carbon emissions,relevant energy product regulations and economic policies,and also encourages awareness campaigns inside enterprises to accelerate the low carbon lighting progress.
Advancement in Materials for Energy-Saving Lighting Devices

Tak H. Kim,Wentai Wang,Qin Li

DOI: https://doi.org/10.1007/s11705-011-1168-y

2012-01-01

Abstract:This review provides a comprehensive account of energy efficient lighting devices, their working principles and the advancement of these materials as an underpinning to the development of technology. Particular attention has been given to solid state lighting devices and their applications since they have attracted the most interest and are the most promising. Solid state lighting devices including white light emitting diodes (LEDs), organic LEDs (OLEDs), quantum-dot LEDs (QLEDs) and carbon-dot LEDs (CLEDs) are promising energy efficient lighting sources for displays and general lighting. However there is no universal solution that will give better performance and efficiency for all types of applications. LEDs are replacing traditional lamps for both general lighting and display applications, whereas OLEDs are finding their own special applications in various areas. QLEDs and CLEDs have advantages such as high quantum yields, narrow emission spectra, tunable emission spectra and good stability over OLEDs, so applications for these devices are being extended to new types of lighting sources. There is a great deal of research on these materials and their processing technologies and the commercial viability of these technologies appears strong.
Discussion on the Utilization of Electric Energy Saving in the Construction Project

Yang Xiangdong

DOI: https://doi.org/10.3969/j.issn.1006-4311.2010.24.086

2010-01-01

Abstract:This paper describes principles that electrical energy saving design followed,the paper focuses on the line losses in the design of building electrical energy,transformer option,lighting energy saving,electrical energy,air-conditioning systems energy-saving,water supply and drainage and other aspects of energy saving technical measures and the application in construction engineering.

Energy-saving Technology for Lighting

Research on Load Characteristics of Energy-saving Lamp and LED Lamp

Study of Energy Efficient with Intelligent Traffic and Illuminating Control System

Discussion on Energy-saving for Emergency Lighting

Discussion on Energy Saving of Lighting Control

Energy Saving Intelligent LED Lighting System Design for Indoor Lighting

Smart lights technology used in library energy-saving

The Energy-Saving Unit about Illumination Based on Normal Lighting System

Present Application Situation and Researches on Energy Saving Conservation Technology for Road Lighting

A Intelligent Energy Saver for Lighting System with a Novel Converter Circuit Topology

Intelligence Street Light System of Saving Energy Based on WCN

LEDs: A Promising Energy-Saving Light Source for Road Lighting

Energy Saving Research on Building Lighting System

Applications of Energy Management System in Green Buildings

Application of the Intelligent Lighting Control in the Office

Summarization about Electronic Energy Saving Lamps

The Energy-Saving Modification Program of Lighting Equipment Based on the Economic Evaluation

Wireless Intelligent Control Design for Energy-saving Road Lighting System

Lighting Design Approaches with Low Carbon Emissions

Advancement in Materials for Energy-Saving Lighting Devices

Discussion on the Utilization of Electric Energy Saving in the Construction Project