Summarization about Electronic Energy Saving Lamps

李辉群,周春艳,姚豪,赵元生,冯自平

DOI: https://doi.org/10.3969/j.issn.1002-6339.2004.02.025

2004-01-01

Abstract:This paper introduces the concepts and principle of energy saving lamps,and some problems about the market of this products.

What problem does this paper attempt to address?

Research on Load Characteristics of Energy-saving Lamp and LED Lamp

Yingying Tang,Qian Chen,Ping Ju,Yuqing Jin,Fu Shen,Beibei Qi,Zhuolin Xu

DOI: https://doi.org/10.1109/powercon.2016.7753932

2016-01-01

Abstract:It is urgent for modern society to save energy and protect environment. But the efficiency of traditional lighting equipment which occupies a rather high proportion of total electric load is very low. Now, they are more and more instead by power electronics based devices, such as energy-saving lamps or LED lamps. For the different characteristics from that of traditional devices, the new kind of lighting equipment may have uncertain influence to power grid. Firstly, their topologies and control schemes are studied and analyzed. Then, the general models, which are suitable for simulation analysis, are proposed. After that, the simulation study and physical experiment are carried on respectively. It is revealed and manifested that the characteristics of both energy-saving lamp and LED lamp are quite different from that of traditional lamps, and may have adverse impact on the safety and stability of power grid.
Discussion on Energy-saving for Emergency Lighting

Xu Hua,Zhong Xin

DOI: https://doi.org/10.3969/j.issn.1729-1275.2011.03.011

2011-01-01

Abstract:The paper expounds the requirements of code for emergency lighting and puts forwards the energy-saving method of light source, lamps & lanterns and control system.
Energy Saving Intelligent LED Lighting System Design for Indoor Lighting

HUANG Lingchen,ZHONG Qing,WANG Xiaoping,WANG Liqiang

DOI: https://doi.org/10.3969/j.issn.1005-5630.2011.05.014

2011-01-01

Abstract:Aiming at the severe problem of energy shortage nowadays,a illumination system with the combination of solar energy and LED source in order to reduce consumption of indoor lighting is put forward.In condition of large amount of ambient light,the solar cells can supply power for both battery charging and system operation;in condition of little ambient light,the system can be charged by the battery directly.Besides,this system has USB interface through which we can charge the battery in case of long-term low light intensity.This system can realize automatic illumination adjustment and keep the stable illumination in working platform,thus,provide the best luminous environment for long-term white collar workers.Electric power will be largely saved with the automatic illumination adjustment and solar energy charging.
Environmental Impact and Countermeasure Analysis of Mercury in Energy Saving Lamps

Li Yan,Chen Xin,Wang Lin

DOI: https://doi.org/10.3969/j.issn.1673-1212.2009.05.011

2009-01-01

Abstract:As the use of energy saving lamps is vigorously popularized,the environmental impact of energy saving lamps is becoming more of a concern.This paper uses simplified life cycle analysis(SLCA) to compare mercury emissions in different life cycle phases between energy saving lamps and incandescent lamps.Although the result tells in the whole life cycle the mercury emissions of energy saving lamps are much less than those of incandescent lamps,the mercury of energy saving lamps mostly has effect in production stage and abandoned stage.The standardization of production and process is helpful to reduce the amount of mercury in energy saving lamps,while on abandoned stage the recycle of mercury focuses on recovery ways and cost burden.After field investigation,this paper puts forward some relevant suggestions.
Energy-saving Technology for Lighting

Huai‐Ning Wu

2010-01-01

Abstract:The paper explains how to improve the power efficiency of lighting through rational selection and use of lighting devices and the use of energy-saving devices.
Discussion on Energy Saving of Lighting Control

Xu Hua

DOI: https://doi.org/10.3969/j.issn.1671-9506.2007.10.029

2007-01-01

Abstract:Green lighting is problems been considered all over the world today, and lighting control is one of the important measures for lighting energy saving. The paper introduces some measures and key-point for lighting control, and analyzes the effect of control in light- ing energy saving.
A Intelligent Energy Saver for Lighting System with a Novel Converter Circuit Topology

DU Yi,ZHAO Rong-xiang,YANG Huan

DOI: https://doi.org/10.3969/j.issn.1000-100x.2007.10.009

2007-01-01

Abstract:A novel single-phase AC/DC/AC converter with a reduced number of devices using one IPM module is in-troduced.Based on this new circuit,the intelligent energy saver for lighting system has improved power quality in Grid which was deteriorated.The main circuit,operation,analysis,control methods and a simulation in Matlab/Simulink are illus-trated and given.Experiment results show the effectiveness of this system.
LEDs: A Promising Energy-Saving Light Source for Road Lighting

Fusheng Li,Dahua Chen,Xianjie Song,Yuming Chen

DOI: https://doi.org/10.1109/appeec.2009.4918460

2009-01-01

Abstract:Rising demand with diminishing reserves of oil and gas spread the energy crisis all over the world. Renewable energy and efficiency technology are the keys to resolve the energy crisis. As the improvement in luminous efficacy, LEDs have been an energy-saving choice for general illumination and road lighting. This paper made a comparison between LEDs system and HPS system for road lighting to evaluate which one is more energy efficient and discussed some factors may influence the efficiency of LEDs system and HPS system, such as mesopic vision, dimming, color of illumination. Though the difference in total luminaire efficacy was not that much in favor of the LEDs, LEDs show a promising prospect in the near future because of the dramatic improvement in luminous efficacy.
A Simulative Platform that Evaluates the Energy Save Rate of the Street Lamp System Based on JiST/STRAW

Tao Yang,Yinyang Wang,Hu Xiong,Liangwen Yu,Yong Deng,Jianbin Hu,Zhong Chen

DOI: https://doi.org/10.1109/IMCCC.2011.120

2011-01-01

Abstract:With the society's advocacy of "low-carbon energy-saving" way of life, saving energy has been a heated topic. Although the street lamp is an indispensable part of the basic facilities of a city, its large energy consumption at present has wasted a lot of natural resources. In order to solve this problem, many scientific researchers provide many solutions by using software or hardware methods to save energy. On account of the process of scientific research nowadays, we design a simulation platform that evaluates the energy consumption on the basis of JiST and STRAW. By using this platform we can analogy and contrast every proposal to choose the best solution. What's more, we design a system that controls the street lamp based on Agent. We modify the configuration and simulate every possible option to choose the best.
Present Application Situation and Researches on Energy Saving Conservation Technology for Road Lighting

Wang Xiaoyuan,Qi Weigui

DOI: https://doi.org/10.3969/j.issn.1004-440X.2010.01.003

2010-01-01

Abstract:Along with the rapid development of the community economy and city construction,urban lighting has been one of the chief signs that represent the urban civilization and modernization level.So it is an increasing concern and its scale has been steadily enlarged.Under this trend,the electric energy expenditure has been racing up.Because urban lighting energy consumption is one of the application areas of power-saving technology,it has aroused extensive concern in recent years.In this paper,the present application situation and researches on the energy conservation technology of urban lighting in our country are introduced in detail.Finally,make a summary of the problems on the economization on electricity in illumination and the solution to these problems.
The Energy-Saving Unit about Illumination Based on Normal Lighting System

Yang Guang

DOI: https://doi.org/10.3969/j.issn.1008-5521.2008.04.010

2008-01-01

Abstract:Normal lighting system is used widely in public lighting.Because of its intrinsic defect,It causes the problem of uninterrupted lighting universally and squander a large number of electrical energy.Based on normal lighting system and situation,the article gives the design and appliance on energy-saving unit about illumination.The unit has the function of separate adjustable set value of illumination.The effect of energy-saving can be obtained by using the unit.
Discussion on the Utilization of Electric Energy Saving in the Construction Project

Yang Xiangdong

DOI: https://doi.org/10.3969/j.issn.1006-4311.2010.24.086

2010-01-01

Abstract:This paper describes principles that electrical energy saving design followed,the paper focuses on the line losses in the design of building electrical energy,transformer option,lighting energy saving,electrical energy,air-conditioning systems energy-saving,water supply and drainage and other aspects of energy saving technical measures and the application in construction engineering.
Research of Solar Energy System For Lighting

Chen Shangwu,Zheng Sheng,Zhai Jianyong,Chen Min,Qian Zhaoming

DOI: https://doi.org/10.3969/j.issn.1004-440X.2006.04.015

2006-01-01

Abstract:This paper presents the merits of some kind of lamps,and then the authors take research in the application of LED in the solar system.The arrangement rules of battery versus photovoltaic cells and a new type of charger are also discussed and proposed in this article.At last,experiment is conducted to verify the feasibility of the new charger.
Environmental Impacts Analyses Of Mercury In Energy Saving Lamps

Li Yan,Chen Xin,Wang Lin

2010-01-01

Abstract:As the use of energy saving lamps is vigorously popularized, the environmental impacts of energy saving lamps attract widely concerns. This paper uses simplified life cycle analyses (SLCA) to compare mercury emissions in different life cycle phases between energy saving lamps and incandescent lamps. Although the result tells in the whole life cycle the mercury emissions of energy saving lamps are much less than those of incandescent lamps, the mercury of energy saving lamps mostly have negative impacts on the production stage and the abandoned stage. The standardization of production and processes is helpful to reduce the amount of mercury in energy saving lamps; while on the abandoned stage, the recycle of mercury focuses on recovery ways and cost burden.
Comprehensive Energy Saving of Architecture Electric System

Yi Xu

2010-01-01

Abstract:The current situation of architecture electric energy saving was analyzed,the energy saving 4-steps was proposed,it inclueded learning and diagnosing current situation,finding problems,selecting and making approach,implementing approach and offering feedback.It was also proposed that reducing the line loss of architecture system should be achieved by detecting and managing architecture energy consumption so as to save energy.
The Experimental Research of Light Efficien for Lamps

Zhou Decheng,Liu Muqing,Han Lei,Zhou Xiaoli

DOI: https://doi.org/10.3969/j.issn.1004-440X.2006.01.003

2006-01-01

Abstract:The luminous efficien is the key parameter of electric light sources energy-saving performance. From the point of view of experiment, This article first calculates the spectrum power distribution of incandescent lamp, fluorescent lamp, high-pressure sodium lamp and the metal-halide lamp, then calculates the ratio of visible spectrum power to the whole spectrum power in order to prove theoretically that incandescent lamps have the low light efficiency, while the high-pressure sodium lamps and the metal-halide lamps have the higher light efficiency.
Energy Saving Research on Building Lighting System

Bao DING,Jin JIANG

DOI: https://doi.org/10.3969/j.issn.1002-6339.2005.02.012

2005-01-01

Abstract:The composition,basic functions and working process of building lighting voltage regulation system is described in this paper.Based on compensation concept,the principle of this system is analyzed by utilizing the controlled voltage source and controlled current source model of a transformer.The optimal power supply voltage of light fitting is put forward according to its characteristics of luminance and life in building lighting system.Using the optimal power supply voltage for lighting in the building and time-varying voltage regulation scheme outside,the energy-saving ratio is calculated,and it's up to 22.3%.
Lecture on Electrical Energy Quality I. Research Survey of Electrical Energy Quality

CHENG Haozhong

DOI: https://doi.org/10.3969/j.issn.1001-5531.2007.02.015

2007-01-01

Abstract:The study of electrical energy quality is an important task which electric power engineers and researchers should work out. At the same time, the electrical energy quality has become a focus that people are concerning about too. The development of studying in electrical energy quality was briefly introduced. Furthermore, the main research fields of electrical energy quality, which included definition, origin, analytical procedures, testing and monitoring, compensation and correlation standards, were set forth.
Building Electrical Energy Saving Measures

XU Wei

DOI: https://doi.org/10.3969/j.issn.1007-8320.2011.11.137

2011-01-01

Abstract:With the rapid development of our economy and people living standard rise ceaselessly, electric power energy shortage becomes restricts our country to realize the sustainable development is one of the important factors. This article introduces the meaning and importance of building electrical energy saving, and on this basis, from the lighting, power supply system and power equipment system introduced the three aspects of building electrical energy saving measures.
PKU-STRAW-L: A Simulative Platform Evaluate the Power-Saving Rate of the Intelligent Street Lamp System

Yang Tao,Lingbo Kong,Yinyang Wang,Hu Jian-Bin,Chen Zhong

DOI: https://doi.org/10.1109/uic-atc.2012.116

2012-01-01

Abstract:A Low-Carbon Economy (LCE) has been a heated economy topic throughout the world. The street lamp system is a large energy consumption system although it is indispensable part of the basic facilities of a city. So it is important for many scientific researchers to provide many solutions to save energy efficiently. In this paper, we design a simulation platform named PKU-STRAW-L that evaluates the energy consumption based on famous Java simulator JiST/STRAW. We also design a test bed system that intelligently controls the street lamp based on Peking University STRAW. The intelligent lamp control system is based on the VANET's DSRC communication and focuses on some lamp-lighting strategies when vehicle drives on cross road, straight road and pre-lighting. By using this platform we can evaluate the power-saving rate of this intelligent street lamp system.

Summarization about Electronic Energy Saving Lamps

Research on Load Characteristics of Energy-saving Lamp and LED Lamp

Discussion on Energy-saving for Emergency Lighting

Energy Saving Intelligent LED Lighting System Design for Indoor Lighting

Environmental Impact and Countermeasure Analysis of Mercury in Energy Saving Lamps

Energy-saving Technology for Lighting

Discussion on Energy Saving of Lighting Control

A Intelligent Energy Saver for Lighting System with a Novel Converter Circuit Topology

LEDs: A Promising Energy-Saving Light Source for Road Lighting

A Simulative Platform that Evaluates the Energy Save Rate of the Street Lamp System Based on JiST/STRAW

Present Application Situation and Researches on Energy Saving Conservation Technology for Road Lighting

The Energy-Saving Unit about Illumination Based on Normal Lighting System

Discussion on the Utilization of Electric Energy Saving in the Construction Project

Research of Solar Energy System For Lighting

Environmental Impacts Analyses Of Mercury In Energy Saving Lamps

Comprehensive Energy Saving of Architecture Electric System

The Experimental Research of Light Efficien for Lamps

Energy Saving Research on Building Lighting System

Lecture on Electrical Energy Quality I. Research Survey of Electrical Energy Quality

Building Electrical Energy Saving Measures

PKU-STRAW-L: A Simulative Platform Evaluate the Power-Saving Rate of the Intelligent Street Lamp System