Abstract:Structural Health Monitoring, Ahead of Print. Ultrasonic testing technology is widely used for its exceptional accuracy and resolution. Commercial ultrasonic testing systems basically use piezoelectric transducers as ultrasonic excitation elements. However, the performance of piezoelectric transducers is not stable enough in high-temperature and high-humidity environments. Therefore, a fiber optic laser-ultrasonic transmitter based on collapsed photonic crystal fiber (CPCF) was proposed. The CPCF guides the laser in the core into the photoacoustic material and realizes the ultrasonic excitation on the side wall of the fiber based on the optical-thermal-acoustic energy conversion. Finite element analysis and experimental research on the photonic crystal fiber (PCF)-CPCF-PCF microstructure show that controlling the CPCF length precisely enables quantitative modulation of the optical coupling coefficient, reflecting the optical energy in photoacoustic energy conversion. Three PCF-CPCF-PCF microstructures with different optical coupling coefficients were fusion spliced onto an optical fiber, and three-point ultrasonic excitation was successfully achieved on aluminum plates. The peak-to-peak values are all around 1.5 V, indicating that the energy of ultrasonic waves is balanced, which helps realize the baseline-free and standardized application of transmitters. Furthermore, the detection effect of ultrasonic waves generated by the transmitter on the thickness and defects of the plate was studied. By analyzing the ultrasonic echoes in the aluminum and carbon fiber-reinforced polymer plates, the corresponding wave speeds were calculated to be 6030.52 and 2522.34 m/s, similar to the longitudinal wave speeds in the corresponding materials. The indicators of ultrasonic waves in the time domain and frequency domain are sensitive to the thickness and defects of the plate. The amplitude and time-of-flight of the ultrasonic wave change monotonically with increasing damage severity. This study elucidates the principle of the fiber optic ultrasonic transmitter and demonstrates its capability of quasi-distributed ultrasonic excitation. Furthermore, the feasibility of non-destructive testing based on this transmitter was also verified.

Experimental Set-Up of Laser Ultrasonic Techniques and Applications

Laser-Induced Full-Matrix Ultrasonic Imaging of Complex-Shaped Objects

Portable Ultrasonic Detector Used in Void Content of Carbon-fiber Reinforced Plastics

A Study of Inner Crack Testing with the Laser Phased Array Method.

Quantitative Detection of Surface Defect Using Laser-Generated Rayleigh Wave with Broadband Local Wavenumber Estimation

Note: an in Situ Method for Measuring the Non-Linear Response of a Fabry-Perot Cavity.

Simultaneous Measurement of Elastic Moduli, Attenuation, Density, and Thickness of a Layer by Ultrasonic Spectroscopy Using Point-Focus Transducer

Simultaneous Measurement of Local Longitudinal and Transverse Wave Velocities, Attenuation, Density, and Thickness of Films by Using Point-Focus Ultrasonic Spectroscopy

Non-destructive laser-ultrasonic Synthetic Aperture Focusing Technique (SAFT) for 3D visualization of defects

A modified synthetic aperture focusing algorithm used for transmission detection based on laser ultrasonics method

Nondestructive Evaluation of MEMS Devices by Laser Confocal Measurements

Experimental research on ultrasound-assisted underwater femtosecond laser drilling

A fiber optic laser-ultrasonic transmitter based on collapsed photonic crystal fiber for ultrasonic testing

Nondestructive characterization of mechanical properties on metallic and polymer plates using hybrid laser-air coupled ultrasonic techniques

Stability research of laser confocal probe for measuring the micro-shpere

High Resolution Displacement Measurement by a Novel Michelson Laser

Tunable high-finesse fiber optic Fabry-Perot interferometer for photoacoustic tomography (Conference Presentation)

Detection Techniques of Femtosecond Lasers

Nondestructive testing of internal defects by ring-laser-excited ultrasonic

Defect imaging based on laser ultrasonic frequency domain synthetic aperture focusing technology with separated generation–detection and 2-D equivalent velocity mapping

Laser ultrasonic detection for defects of LAM components based on variable time window intensity mapping with adaptive 2σ thresholds