Abstract:Track signal circuit has been widely used in the railway control system to detect the presence of a train. The track impedance is one of the most important parameters in designing the track signal circuit. To this end, finite element method (FEM) could be a good choice due to its capacity of handling complex geometries and media. If FEM is adopted, the open boundary problems in 3D must be tackled in the first place, because the ballastless track locates in an air-ground half space. Second, if the skin effect of conductor is included, the size of each element has to be less than the skin depth, which results in a huge number of unknowns. Accordingly, the computational time and the convergence problem would be big obstacles in reality. Thus, an impedance decomposition approach is proposed in virtue of the physical nature of impedance computation. The track impedance is decomposed into two parts, i.e., the inner and external track impedance. Each kind of impedance is calculated using an appropriate method, which can essentially reduce the computational burden. To validate the proposed decomposition approach, the impedance of a single conductor above the ground is taken as an example, and is calculated by the decomposition method and analytical formulation respectively. The calculated results agree with each other very well. The proposed decomposition approach is applied to calculate the impedance of the double-block ballastless track in Southern Shanxi railway. The frequency- dependent characteristic of the impedance is presented. The absolute value and the trend of the numerical results can reach agreement with the measurements if the certain error is considered from viewpoint of the practical engineering.

FBD-method and Its Application in Traction Power Systems

On-line Measurement for Power Angle and Circuit Parameter in the Turbo Steam Generator with the FEM Based

Detecting methods of reactive power, harmonic and negative-sequence current in electrified railway systems

CURRENT DETECTIONS FOR THREE-PHASE POWER SYSTEM BASED ON FBD METHOD

Detection and Control for Three-Phase Power Quality Compensator

Application of FBD Method and Composite Control in Active Power Filter

Capacity configuration of V/V transformer-based railway power conditioner and optimal energy compensation strategy

Power Flow Algorithm for Traction Power Supply System of Electric Railway Based on Locomotive and Network Coupling

Fast Reactive Current Detection Based on FBD for Unbalanced System

A Novel Active Power Quality Compensator Topology for Electrified Railway

Study of Novel Traction Substation Hybrid Power Quality Compensator

A novel method for removal of DC component in non-sinusoidal signals of power systems

Real-Time Tracking of Substation's Feeder Current Based on Traction Calculation

Simulating Calculation of Traction Substation's Feeder Current Based on Traction Calculation

An Electric Railway Power Conditioning System Based on Asymmetrical Connection Balance Transformer

A Methodology for Power Dispatch Based on Traction Station Clusters in the Flexible Traction Power Supply System

Hybrid Var and Harmonic Dynamic Compensator and Application to Three-two Phase Traction Substation

An Asymmetrical Connection Balance Transformer-Based Hybrid Railway Power Conditioning System with Cost-Function Optimization

Impedance Decomposition Method and Its Application in Calculating the Impedance of Ballastless Track

Analysis of Traction Power Supply System on Power System

Analysis and application of unbalanced distortion load reactive power theory