Abstract:The present study presents the promising friction reducing effect of electrophoretic deposition (EPD) prepared graphene coating when it is utilized as a solid lubricant on the surface of silicon wafer. Graphene coatings with various surface morphology and microstructures are fabricated by adopting different combinations of applied voltage and deposition duration in EPD process and characterized by SEM, Raman and XPS. Their frictional behaviors are investigated in a set of ball-on-plate reciprocating friction tests conducted in ambient air condition (50-80%RH), in which silicon nitride balls (Φ4 mm) are used as the counterpart material. Moreover, the influence of the normal load on the friction reducing effect of graphene coating is examined. The results show that the coefficients of friction (COF) of graphene coated silicon wafer presents a steady-state value around 0.08-0.1, reduced by over 80% compared with that of the bare silicon, around 0.6. It is noted that changing EPD parameters or normal loads only affects the durability of friction reducing effect of the fabricated graphene coating, but does not show discernable influence on the extent of the reduction in the steady-state COF. The examination on the worn surface within the wear tracks on both the graphene coated silicon and its counterface suggest that the formation of graphene-containing transfer layer on the sliding interface is a critical and necessary condition for the presence of such stable low-friction sliding period. Once they are removed from the sliding interface or worn out, the friction reducing effect disappears. Compared with increasing the EPD voltage, elongating the deposition duration at low voltage in the EPD process, which could produce graphene coatings with more compact microstructure, is proved to be a more effective approach to enhance the durability and load capacity of the graphene coating as a solid lubricant.

Research on Preparation and Friction Properties of Graphene by Liquid Phase Exfoliation

Preparation and tribological properties of eco‐friendly as‐exfoliated graphene in grease

Superhigh-exfoliation Graphene with a Unique Two-Dimensional (2D) Microstructure for Lubrication Application

Impact of Ultrasonic Probe Type, Frequency, and Static Pressure on Large-Scale Graphene Exfoliation

Friction-induced Nano-Structural Evolution of Graphene As a Lubrication Additive

Effect of Static Pressure on Ultrasonic Liquid Phase Exfoliation of Few-Layer Graphene

First-Principles Study of the Friction and Wear Resistance of Graphene Sheets

Atomistic Insights into Friction and Wear Mechanisms of Graphene Oxide

The Tribological Properties of Solid Lubrication Graphite Coatings Prepared by a Sol-Gel Method

Achieving Controllable Friction of Ultrafine-Grained Graphite HPG510 by Tailoring the Interfacial Nanostructures

Advanced research On Graphene‐base nano‐materials: Synthesis, Structure, Dispersibility and Tribological applications

The Preparation of Crumpled Graphene Oxide Balls and Research in Tribological Properties

Study on the fabrication and tribological behavior of self-assembled functionalized graphene oxide in water

Friction-Induced Transformation from Graphite Dispersed in Esterified Bio-Oil to Graphene

Study on the Friction Reducing Effect of Graphene Coating Prepared by Electrophoretic Deposition

Graphene as a Lubricant Additive for Reducing Friction and Wear in Its Liquid-Based Form

Graphene Oxide Nanosheets as Effective Friction Modifier for Oil Lubricant: Materials, Methods, and Tribological Results

Tribological Properties of Oleic Acid-Modified Graphene As Lubricant Oil Additives

Dispersion Stability And Tribological Properties of Covalently Modified Graphene As A Lubricating Oil Additive

Functionalized Graphene from Electrochemical Exfoliation of Graphite toward Improving Lubrication Function of Base Oil

Preparation of Graphene Via Liquid-Phase Exfoliation with High Gravity Technology from Edge-Oxidized Graphite