Abstract:The present study presents the promising friction reducing effect of electrophoretic deposition (EPD) prepared graphene coating when it is utilized as a solid lubricant on the surface of silicon wafer. Graphene coatings with various surface morphology and microstructures are fabricated by adopting different combinations of applied voltage and deposition duration in EPD process and characterized by SEM, Raman and XPS. Their frictional behaviors are investigated in a set of ball-on-plate reciprocating friction tests conducted in ambient air condition (50-80%RH), in which silicon nitride balls (Φ4 mm) are used as the counterpart material. Moreover, the influence of the normal load on the friction reducing effect of graphene coating is examined. The results show that the coefficients of friction (COF) of graphene coated silicon wafer presents a steady-state value around 0.08-0.1, reduced by over 80% compared with that of the bare silicon, around 0.6. It is noted that changing EPD parameters or normal loads only affects the durability of friction reducing effect of the fabricated graphene coating, but does not show discernable influence on the extent of the reduction in the steady-state COF. The examination on the worn surface within the wear tracks on both the graphene coated silicon and its counterface suggest that the formation of graphene-containing transfer layer on the sliding interface is a critical and necessary condition for the presence of such stable low-friction sliding period. Once they are removed from the sliding interface or worn out, the friction reducing effect disappears. Compared with increasing the EPD voltage, elongating the deposition duration at low voltage in the EPD process, which could produce graphene coatings with more compact microstructure, is proved to be a more effective approach to enhance the durability and load capacity of the graphene coating as a solid lubricant.

First-Principles Study of the Friction and Wear Resistance of Graphene Sheets

Wear Evolution of Monolayer Graphene at the Macroscale

Molecular dynamics study of graphene-coated reinforced tribomechanical properties: Hard versus soft substrates

Suppressing Nanoscale Wear by Graphene/Graphene Interfacial Contact Architecture: A Molecular Dynamics Study.

Effects of Thickness and Particle Size on Tribological Properties of Graphene as Lubricant Additive

Atomistic Insights into Friction and Wear Mechanisms of Graphene Oxide

Lubrication Performance of Hydrogenated Graphene on Diamond-Like Carbon Films Based on Molecular Dynamics Simulation

Graphene-induced reconstruction of the sliding interface assisting the improved lubricity of various tribo-couples

Graphene as a Lubricant Additive for Reducing Friction and Wear in Its Liquid-Based Form

Effect of Two Graphene Coatings on the Friction and Wear of Sliding Electrical Contact Interface

Electric Resistance As a Sensitive Measure for Detecting Graphene Wear During Macroscale Tribological Tests

Achieving Controllable Friction of Ultrafine-Grained Graphite HPG510 by Tailoring the Interfacial Nanostructures

Friction-induced Nano-Structural Evolution of Graphene As a Lubrication Additive

Atomistic simulation and experimental verification of tribological behavior of high entropy alloy/graphene composite coatings

Remarkable anisotropic wear resistance with 100-fold discrepancy in a copper matrix laminated composite with only 0.2 vol% graphene

An investigation on the tribological behaviors of steel/copper and steel/steel friction pairs via lubrication with a graphene additive

Wear Resistance Limited by Step Edge Failure: the Rise and Fall of Graphene As an Atomically Thin Lubricating Material.

Lubrication Performance of Graphene in the Sliding Electrical Contact Interface

Graphene Failure under MPa: Nanowear of Step Edges Initiated by Interfacial Mechanochemical Reactions

Study on the Friction Reducing Effect of Graphene Coating Prepared by Electrophoretic Deposition

Impacts of the Substrate Stiffness on the Anti-Wear Performance of Graphene