Abstract:Herein, an efficient, facile, scalable production of graphene dispersions via exfoliation of graphite in an environment-friendly PVA/H2O solvent system is reported. To warrant the impact of processing parameters on exfoliation efficiency, a systematic investigation is carried out using UV–visible spectroscopy. Under the optimal shearing parameters (1 h, 10 k rpm) with the PVA-to-fed graphite mass ratio of 10, a high concentration graphene dispersion (3.36 mg mL−1) is achieved. The estimated graphene yield is found to be 33% that further increases to 90% after sediment recycling. With the aim of detailed quality analysis, centrifugal cascading is adopted to predominately sort the graphene flakes from the upper end of the distribution. Through various characterization techniques, it is confirmed that the resulting dispersion comprises high-quality graphene flakes (1–5 layers) having thickness up to 1.48 nm, lateral dimension ranging from 0.3 to 4 µm, and quite a low level of defects (ID/IG = 0.1). The statistical distribution histogram reveals that most flakes are single-layer (41%), including some bi-layer (21%) and tri-layer (28%), while the remaining can be said five or multi-layer graphene. Meanwhile, the efficacy of the PVA/H2O solvent system is also demonstrated using ultrasonic exfoliation, providing a high concentration of graphene (1.1 mg mL−1) in a relatively short time (8 h). Furthermore, the applicability of the PVA-stabilized graphene dispersion is addressed by fabricating various graphene products such as graphene paper electrodes, graphene composites, and graphene thin films. Impressively, the graphene paper electrode imparts an exceptionally high specific capacitance of 199.63 F g−1 in a potential window range of 0 to 2 V, and hence could be a promising alternative to traditional electrodes in supercapacitors. Conclusively, the exfoliation of graphite in a green polymer–solvent system offers to produce highly concentrated graphene dispersions at a minimal cost that could be widely applicable in different research areas, thus holding the potential for commercial viability.

Preparation of Graphene Via Liquid-Phase Exfoliation with High Gravity Technology from Edge-Oxidized Graphite

Effect of Static Pressure on Ultrasonic Liquid Phase Exfoliation of Few-Layer Graphene

Impact of Ultrasonic Probe Type, Frequency, and Static Pressure on Large-Scale Graphene Exfoliation

Liquid-Phase Exfoliation of Graphene: An Overview on Exfoliation Media, Techniques, and Challenges

Novel Cyclic Ultrasound-Assisted Liquid Phase Exfoliation of Graphene in Deionized Water: A Parameter Study

High-concentration graphene dispersions prepared via exfoliation of graphite in PVA/H2O green solvent system using high-shear forces

Enhanced Exfoliation Efficiency of Graphite into Few-Layer Graphene Via Reduction of Graphite Edge

Room-Temperature Intercalation and ∼1000-Fold Chemical Expansion for Scalable Preparation of High-Quality Graphene

Aqueous cellulose solution assisted direct exfoliation of graphite to high concentration graphene dispersion

High concentration and stable few-layer graphene dispersions prepared by the exfoliation of graphite in different organic solvents

Electrolyte engineering for the mass exfoliation of graphene oxide across wide oxidation degrees

A facile liquid phase exfoliation method to prepare graphene sheets with different sizes expandable graphite

Preparation of Pristine Graphene Sheets and Large-Area/ultrathin Graphene Films for High Conducting and Transparent Applications

Liquid Phase Graphene Exfoliation with a Vibration-Based Acoustofluidic Effector

High yield production of graphene by liquid phase exfoliation of graphite

Powder, paper and foam of few-layer graphene prepared in high yield by electrochemical intercalation exfoliation of expanded graphite.

Few-layer graphene production through graphite exfoliation in pressurized CO 2 assisted by natural surfactant

Research on Preparation and Friction Properties of Graphene by Liquid Phase Exfoliation

Repeated microwave-assisted exfoliation of expandable graphite for the preparation of large scale and high quality multi-layer graphene

Solvothermal-assisted Exfoliation Process to Produce Graphene with High Yield and High Quality

Scalable preparation of high-quality graphene by electrochemical exfoliation: effect of hydrogen peroxide addition