Abstract:BaTiO3/Interpenetrating Polymer Networks (IPNs) composites were prepared by combination of BaTiO3 nanocrystal in tetragonal system and polyurethane(PU)/unsaturated polyester (UP) interpenetrating polymer networks (IPNs). The tetragonal nanocrystalline BaTiO3 was obtained by hydrothermal process and calcination at 1200 degreesC. The prepared materials were polarized with high voltage and small current, and protected by silicon oil. The morphology of BaTiO3/IPNs and the effect of combination of BaTiO3 on the damping behavior of IPNs were studied. The relationship between damping performance and dielectric charater was also discussed in terms of dielectric constant and dielectric loss measured. The results show that the areas under loss modulus (E-n) and the values of loss factors (tandelta) were both increased by combination of BaTiO3 into IPNs system. The maximum value of E-n increased above 100 MPa compared with pure IPNs and the extent increased more remarkably after polarizing process. The main and shoulder peak of tandelta curves both moved toward higher temperature ranges, and the temperature ranges of tandelta>0.3 was higher than 100 degreesC. Moreover, through polarizing process, the composites exhibited synergistic action caused by elastomeric damping, interfacial abrasive damping and piezoelectric damping mechanisms. The relationship study of damping property and dielectric characters showed that the temperature ranges exhibited excellent consistency Of maximum dielectric loss and modulus with damping loss factor.

Synthesis and Application Studies of Castor Oil PU/PMMA IPNs with BaTiO3fiber Nanocomposites

Synthesis and application studies of castor oil PU/PMMA IPNs with BaTiO(3) fiber nanocomposites

Preparation, Morphology, and Thermoelectric Property Studies of BaTiO3 Superfine Fiber/castor Oil Polyurethane-Based IPN Nanocomposites

Simultaneous Interpenetrating Polymer Networks of Polyurethane from Pentaerythritol–Modified Castor Oil and Polystyrene: Structure–Property Relationships

Cure of Neat Resins and Properties of Composites for Interpenetrating Polymer Networks from the Novel Bismaleimide and Cyanate Containing Naphthalene

Preparation, morphology, and mechanical properties of modified-PU/UPR graft-IPN nanocomposites with BaTiO3 fiber

Studies of IPNs polymerization technics based on polyurethane networks

Morphology, Mechanical And Damping Properties Of Batio3/(Pu/Up-Ipns) Composites

Preparation, Morphology and Damping Property of PU/UP Interpenetrating Polymer Networks

Thermal, Mechanical, and Morphological Properties of Soybean Oil-Based Polyurethane/epoxy Resin Interpenetrating Polymer Networks (Ipns)

Batio3/Ipns Composites: Preparation And Correlation Between Dielectric Characters And Damping Performance

Electric and Damping Properties of PU Based IPNs-BaTiO3 Nanocomposites

Synthesis and Characterization of Polyurethane/polybenzoxazine‐based Interpenetrating Polymer Networks (Ipns)

Study on Preparation and Performance of Composite Interpenetrating Polymer Networks Coatings

Synthesis and Characterization of Polyurethane and Epoxy Resin Interpenetrating Polymer Network

Preparation, structure and properties of polyurethane/poly (methyl methacrylate)/organo-montmorillonite nanocomposites

Comparative investigation on dielectric property and thermal conductivity of in situ polymerized and solution mixed polymer nanocoposites

Electric and Damping Properties of PU Based IPNs-BaTiO<sub>3</sub> Nanocomposites

Influence of Barium Titanate on the Damping Properties of Interpenetrating Polymer Networks Based Nanocomposites

Morphologies and Properties of Polyurethane/epoxy Resin Interpenetrating Network Nanocomposites Modified with Organoclay

Synthesis, characterization and properties of organoclay-modified polyurethane/epoxy interpenetrating polymer network nanocomposites