Abstract:Flow chart for the preparation of PEN‐based composite films. Thermal conductive polymer‐based composites synchronously with stable dielectric and excellent mechanical properties are urgently needed for high‐temperature‐resistant electronic devices. Here, a significant improvement in the thermal conductivity (TC), thermal stability, dielectric, and mechanical performance was simultaneously achieved in the polyarylene ether nitrile (PEN)/divinyl siloxane‐bisbenzocyclobutene (BCB) matrix through the incorporation of boron nitride nanosheets (BNNS) combined together with the post‐solid phase chemical reaction technique. The significant increase in the effective filler‐filler and filler‐crystal contacts in the composites was the main reason for the improvement in TC and dielectric constant. Besides, glass transition temperature (Tg) and mechanicals were enhanced in the presence of cross‐linked networks. By synchronously adding 15 vol% BNNS, the TC of composites after treatment reached up to 5.582 W/m.K, enhanced by 4.4 times higher than untreated. The dielectric constant was down to 2.93 at 1 MHz and the loss remained at a relatively low level. Meanwhile, the composite showed significantly enhanced thermal stability, mechanicals, and hydrophobicity (Tg = 336°C, T5% = 529°C, tensile strength and modulus was 94.5 MPa and 5.3 GPa, respectively, the contact angle was 101.76°). Thus, it promotes an effective strategy for fabricating a high‐performance‐polymer composite, which has the potential used in electronic materials. Highlights Crystallization‐crosslinking strategy optimizes overall performance. Crystals fill gaps between BNNS layers and connect thermal conductive pathway. Crosslinked networks limit molecular chain motion to reduce phonon scattering. The highest TC of the PEN/BCB/BNNS composite is up to 7.451 W/m.K. Thermal property shows significant improvement after crosslinking especially Tg.

Properties of the Glass Fibre/interpenetrating Polymer Network Composites Based on Novel Naphthalene-Contained Bismaleimide and Cyanate Resin

Cure of Neat Resins and Properties of Composites for Interpenetrating Polymer Networks from the Novel Bismaleimide and Cyanate Containing Naphthalene

Interpenetrating polymer networks from the novel bismaleimide and cyanate containing naphthalene: Cure and thermal characteristics

Curing, Thermal Stability and Composite Properties for Blends of the Novel Bismaleimide and Cyanate Containing Naphthalene

Synthesis and Characterization of the Bismaleimide Containing Ether Linkage and Naphthalene

Optimizing the Thermal Properties of Fiber Reinforced Phthalonitrile Composites

Curing Behavior of the Bismaleimide Containing Ether Linkage and Naphthalene

Development of chopped glass fiber composites with difunctional benzoxazine and bio‐based phthalonitrile copolymer: A study of mechanical and thermomechanical properties

Preparation and characterization of a novel allyl ether naphthalene phenolic modified bismaleimide resin and its composites

Designing and Preparation of Fiber-Reinforced Composites with Enhanced Interface Adhesion

Synthesis and characterization of cyano-terminated bisphenol AF-type polyarylene ether nitrile

Substantial improvement of thermal conductivity and mechanical properties of polymer composites by incorporation of boron nitride nanosheets and modulation of thermal curing reaction

Investigating the synergistic effects of carbon and glass fibers on the mechanical and thermal properties of phenol‐containing phthalonitrile composites

Preparation, morphology, and mechanical properties of modified-PU/UPR graft-IPN nanocomposites with BaTiO3 fiber

Synthesis and characterization of epoxy resin‐polydicyclopentadiene interpenetrating polymer networks by UV‐initiated simultaneously frontal polymerization

Modification on phthalonitrile containing benzoxazine with cyaniding diamine-type benzoxazine: Curing reaction and properties of their glass fiber-reinforced composites

Preparation and properties of an interpenetrating network polymer based on polydicyclopentadiene and phenolic resin

A study on physical and morphological properties of novel bio-cotton/E-glass fiber–reinforced vinyl ester/epoxy resin hybrid interpenetrating polymer networks composites

Preparation and properties of high-temperature resistant bisphthalonitrile resins containing trifluoromethyl groups reinforced by poly (aryl ether nitrile) capped by phthalonitrile and composites

Mechanical and thermal properties improvement of nano calcium carbonate-filled epoxy/glass fiber composite laminates

Improved mechanical properties of basalt fiber/phthalonitrile composites modified by thermoplastic Poly(phthalazinone ether nitrile)s