Abstract:A high damping rubber bearing (HDRB) is widely utilized in base-isolation structures due to its good energy dissipation capacity and environmentally friendly properties; however, it is incapable of isolating the vertical vibration caused by earthquakes and subways effectively. Thick rubber bearings with a low shape factor have become one of the important vertical isolation forms. This paper provides an experimental comparative study on high damping rubber bearings with low shape factor (HDRB-LSF), thick lead–rubber bearings (TLRB), and lead–rubber bearings (LRB). The abilities of the bearing and energy dissipation of the above bearings are analyzed contrastively considering the influence of vertical pressure, loading frequency, shear strain, and pre-pressure. Firstly, the HDRB-LSF, TLRB, and LRB are designed according to the Chinese Code for seismic design of buildings. Secondly, cyclic vertical compression tests and horizontal shear tests, as well as their correlation tests, are conducted, respectively. The vibrational characteristics and hysteresis feature of these three bearings are critically compared. Thirdly, a corrected calculation of vertical stiffness for the thick rubber bearings is proposed based on the experimental data to provide a more accurate and realistic tool measuring the vertical mechanical properties of rubber bearings. The test results proved that the HDRB-LSF has the most advanced performance of the three bearings. For the fatigue property, the hysteresis curves of the HDRB-LSF along with TLRB are plump both horizontally and vertically, thus providing a good energy dissipation effect. Regarding vertical stiffness, results from different loading cases show that the designed HDRB-LSF possesses a better vertical isolation effect and preferable environmental protection than LRB, a larger bearing capacity, and, similarly, a more environmentally friendly property than TLRB. Hence, it can avoid the unfavorable resonance effect caused by vertical periodic coupling within the structure. All the experimental data find that the proposed corrected equation can calculate the vertical stiffness of bearings with a higher accuracy. This paper presents the results of an analytical, parametric study that aimed to further explore the low shape factor concepts of rubber bearings applied in three-dimensional isolation for building structures.

Analysis and Study on Mechanical Properties and Isolation Effect of High Damping Rubber Isolation Bearing

Behavior of high damping seismic isolation rubber bearings for bridges

Seismic Vulnerability Analysis of Concrete-Filled Steel Tube Tied Arch Bridges Using Symmetrically Arranged High-Damping Rubber Bearings

An Experimental Study on the Mechanical Properties of a High Damping Rubber Bearing with Low Shape Factor

Mechanical Properties and Seismic Loss Assessment of Improved Isolation Bearing with Variable Stiffness

Study on the damping efficiency of continuous beam bridge with constant cross-section applied by lead rubber bearings and fluid viscous dampers

Full-Scale Tests and Analytical Model of the Teflon-Based Lead Rubber Isolation Bearings

Research and Development of High-Performance High-Damping Rubber Materials for High-Damping Rubber Isolation Bearings: A Review

Seismic Performance Of A Multi-Span Rc Highway Bridge With High Damping Rubber Bearings

Mechanical Behavior of Laminated Rubber Isolation Bearing with Buckling Steel Plate

Experimental Investigation on the Effectiveness of Laminated Rubber Bearings to Isolate Metro Generated Vibration

Hysteretic behavior of high damping rubber bearings under multiaxial excitation

Experimental Study of the Mechanical Properties of Full-Scale Rubber Bearings at 23 °C, 0 °C, and −20 °C

Modeling of Hyper-Viscoelastic Properties of High-Damping Rubber Materials during the Cyclic Tension and Compression Process in the Vertical Direction

Influence of ground motion duration on seismic performance of RC frame isolated by high damping rubber bearings

Study on a conical bearing for acceleration-sensitive equipment

Study on vibration reduction and base isolation of continuous bridges

Test of Thick Rubber Bearings on its Compressive Properties

Analysis of the Tension of Rubber Bearings in the Design of Isolated High-Rise Buildings

Application Study on Elastic Sliding Bearings in Isolated High-rise Building

Shaking Table Test for Seismic Isolation Performance of Adjustable Height Seismic Isolation Rubber Bearing