Abstract:The heterogeneous nucleation process of polypropylene (PP)/high density polyethylene (HDPE)/thermoplastic elastomer (POE) composites was realized through blending modification, and characterization techniques, including scanning electron microscopy, differential scanning calorimetry, X-ray diffraction, and dynamic mechanical analysis, were used to analyze the pattern of the impact of modified dicyclohexyl-terephthalamide (TMB-5) on the mechanical properties and thermal stability of the PP/HDPE/POE composites. The results indicated that the modified TMB-5 was advantageous to the improvement of the mechanical properties and thermal stability of the high-temperature (cooking temperature)-resistant PP/HDPE/POE composites. When the amount of added modified TMB-5 was 0.4%, the impact strength and tensile strength of the PP/HDPE/POE composites increased to 36.3 kJ/m 2 and 31.7 MPa, respectively, which were, respectively, 99.5% and 8.5% higher than those of the materials prepared when the amount of added modified TMB was 0.1%. The materials had higher storage modulus in room-temperature and high-temperature environments: 2,438.2 MPa (room temperature), 1,103.9 MPa (120°C), and 1,054.8 MPa (140°C). In addition, the capability of the PP/HDPE/POE composites to crystallize was improved continuously, and the crystallinity increased considerably. At the same time, the crystallization and melting temperatures increased, β-crystal formation was induced, and glass transition temperature increased, thus effectively improving the mechanical properties and thermal stability of the high-temperature (cooking temperature)-resistant PP/HDPE/POE composites.

Polypropylene Modified by T-ZnOw and POE

Enhancement on the properties of polypropylene using bamboo particles: Effect of particle sizes and loadings

Preparation Of Comb-Shaped Polyolefin Elastomers Having Ethylene/1-Octene Copolymer Backbone And Long Chain Polyethylene Branches Via A Tandem Metallocene Catalyst System

Research on Toughening Modification of Copolymerized Polypropylene Using Polyolefin Elastomers

Studies of the Toughness and Reinforcement of PP/Magnesium Hydrate Whisker/POE Composites

Improved Dielectric Properties of Polypropylene-Based Nanocomposites Via Co-Filling with Zinc Oxide and Barium Titanate

Fracture behavior and deformation mechanism of polypropylene/ethylene-octene copolymer/magnesium hydroxide ternary phase composites

Preparation of Poly(Phenylene Oxide)/Polyamide-6 Nanocomposites with High Tensile Strength and Excellent Impact Performance

Toughening and reinforcing waste polypropylene with POE / nano‐SiO 2 under elongational flow

Modified ethylene/α‐octene co‐polymer composites based on dual toughening of hydrogen bonding network and nanospheres

Preparation of PBT/POE‐g‐GMA/PP Ternary Blends with Good Rigidity–toughness Balance by Core–shell Particles

Mechanical properties and thermal stability of high-temperature (cooking temperature)-resistant PP/HDPE/POE composites

Thermal stability, surface wettability and mechanical behavior of highly ordered ZnO ‐doped thermoplastic polyurethane films with hierarchically porous structures

Phase Morphology and Mechanical Properties of the Electrospun Polyoxymethylene/polyurethane Blend Fiber Mats

Mechanical and thermal properties of polypropylene (PP) composites filled with modified shell waste

Effects of Zinc Oxide Nanoparticles on the Morphology and Viscoelastic Properties of Polyamide 6/poly(butylene Terephthalate) Blends

Effect of Multi-Structured Zinc Oxide on the Electrical Properties of Polypropylene Insulating Materials

Realizing Simultaneous High‐temperature Strength and Low‐temperature Elongation in Polyolefin Elastomer Toughened Polypropylene Via Controlling the Dispersed Phase Size

Influence of Surface-Modified TiO2 Nanoparticles on Fracture Behavior of Injection Molded Polypropylene

Effect of the synergistic interaction of zinc adipate, hydrotalcite and ethylene propylene rubber on the performances of polypropylene

Preparation and characterization of polypropylene composites reinforced by functional ZnO/lignin hybrid materials