Abstract:The effect of boron addition (50 ppm) on solidification and segregation characteristics of S31254 superaustenitic stainless steel is investigated through experimental research and theoretical calculation. The optimal thermal deformation range of boron‐free and boron‐containing steels is determined by establishing the constitutive equation and the processing map. Boron plays a positive role in improving segregation and hot ductility. Solidification structure and segregation behavior of S31254 superaustenitic stainless steel ingot containing 0 wt% B and 0.005 wt% B are investigated. The results show that serious element segregation and massive eutectics are present in the center of the ingot. By contrast, the addition of boron reduces the secondary dendrite spacing, the degree of elemental segregation, and the σ phase. Further, the effect of boron on the solidification process is studied by using the high‐temperature confocal laser scanning microscope and combined with Thermo‐Calc thermodynamic simulation results. The results show that boron can widen the solidification temperature range and greatly retard the matrix solidification. The role of boron in refining dendrite structure and inhibiting precipitation is further confirmed. The effect of boron on the constitutive equation of S31254 superaustenitic stainless steel has also been researched through isothermal compression testing in the temperature range of 950–1200 °C and strain rate range of 0.01–10 s−1. The activation energy of the boron‐free and boron‐containing S31254 superaustenitic stainless steels based on the constitutive equation are 427.77 and 495.80 kJ mol−1, respectively. Processing maps indicate that the instability domain is significantly reduced and the hot ductility is improved after the addition of B.

THE BEHAVIOUR OF BORON DURING FERRITE REACTION IN AN ULTRALOW CARBON STEEL

The effect of boron on the properties and structure of austenitic stainless steels

Effect of Boron Concentration on Microstructure and Properties of High-Boron Low-Carbon Ferro-Matrix Alloy

Effect of Boron on Removal of Iron from Aluminium Melts

THE RELATION OF NON-EQUILIBRIUM SEGREGATION AND CRYSTAL DEFECTS

Three-dimensional atom probe analysis of boron segregation at austenite grain boundary in a low carbon steel - Effects of boundary misorientation and quenching temperature

Effect of Boron on Bainitic Transformation Kinetics after Ausforming in Low Carbon Steels

Erosion Behavior and Mechanism of Boronised Steels

Effect of Trace Boron Addition on the Microstructural Evolution and Mechanical Properties in Ti45al8nb2cr-B Alloys

Effect of Boron on the Solidification Characteristics and Constitutive Equation of S31254 Superaustenitic Stainless Steel

Effect of Boron on Continuous Cooling Transformation Behavior of 460B Steel

Effect of boron concentration on microstructures and properties of Fe–B–C alloy steel

Effect of Boron on Proeutectic Phase in Fe-0.77C-B Alloy Solidification Microstructure

Simulation of B Segregation at Austenite Grain Boundary in Low Carbon Steel

Microstructure and properties of high boron bearing steel

Influence of Boron Contents on Oxidation Behavior and the Diffusion Mechanism of Fe–B Based Alloys at 1073 K in Air

Segregation at prior austenite grain boundaries: the competition between boron and hydrogen

Factors Affecting Boron Yield Rate for High-Strength Steel Production

Effect of Ausforming Temperature and Strain on the Bainitic Transformation Kinetics of A Low Carbon Boron Steel

Theoretical Study on Sympathetic Nucleation Vs Ledgewise Growth of Bainitic Ferrite in Steel

Effect of boron accompanied by chromium, vanadium and titanium on kinetics of austenite grain growth