Microstructure and Mechanical Properties of A New Type of Austempered Boron Alloyed High Silicon Cast Steel

Chen Xiang,Li Yanxiang

2013-01-01

China Foundry

Abstract:In the present paper, a new type of austempered boron alloyed high silicon cast steel has been developed, and its microstructures and mechanical properties at different temperatures were investigated. The experimental results indicate that the boron alloyed high silicon cast steel comprises a dendritic matrix and interdendritic eutectic borides in as-cast condition. The dendritic matrix is made up of pearlite, ferrite, and the interdendritic eutectic boride is with a chemical formula of M2B (M represents Fe, Cr, Mn or Mo) which is much like that of carbide in high chromium white cast iron. Pure ausferrite structure that consists of bainitic ferrite and retained austenite can be obtained in the matrix by austempering treatment to the cast steel. No carbides precipitate in the ausferrite structure and the morphology of borides remains almost unchanged after austempering treatments. Secondary boride particles precipitate during the course of austenitizing. The hardness and tensile strength of the austempered cast steel decrease with the increase of the austempering temperature, from 250 degrees C to 400 degrees C. The impact toughness is 4-11 J.cm(-2) at room temperature and the impact fracture fractogragh indicates that the fracture is caused by the brittle fracture of the borides.