Abstract:A multi-stage high pressure reducing valve (MSHPRV) is proposed. It can achieve a multi-stage pressure reducing way. Valve failure mainly occurs under high pressure and high temperature conditions, thus it is necessary to investigate the strength of MSHPRV under those complex conditions. In this paper, the mathematical model of MSHPRV is established and Computational Fluid Dynamics (CFD) method is employed to simulate its flow fields and thermo-mechanical stress. Next, the stress of MSHPRV under different opening time and the fatigue damage of MSHPRV under different valve openings are studied. Finally, two changes are provided on geometry of MSHPRV and the geometrical factors are optimized. The results show that, the radial direction from inner wall to outer wall is the main heat transfer direction for valve body. At opening time 50 s, the working condition of MSHPRV is dangerous condition. Meanwhile, the maximum value of thermal stress is 487 MPa, which is located at the upper end face of valve chamber region B3. There is a lag effect of stress distribution with respect to temperature distribution. The combined stress of valve body is composed of thermal stress and mechanical stress, in which thermal stress holds the dominant position. Moreover, with the increasing of valve opening, the fatigue damage of valve body increases correspondingly. It can be concluded that MSHPRV can cope with complex conditions like high pressure and high temperature. In the optimization design of MSHPRV, it can be found that the best strength of MSHPRV is achieved with such geometrical factors as angle 15, diameter 4 mm and 2 stage plates. Besides, radian design as the improved structure is recommended. This work can benefit the further research work on the regulation performance and safe operation of high pressure reducing valve. (C) 2017 Elsevier Ltd. All rights reserved.

Analysis on Thermal Stress of SV Used in Continuous Casting and Improvement of Its Shape

Simulation Analysis of Thermal Stress During Casting Process of Large-Sized Alloy Steel Ingot

Continuous Casting Mould for Square Steel Billet Optimised by Solidification Shrinkage Simulation

Failure analysis of Al2O3-C-SiO2 slide gate plates during continuous casting based on numerical simulation

A Study on the Numerical Simulation of Thermal Stress During the Solidification of Shaped Castings

Analysis of heat transfer and thermal stress in continuous casting with mechanical reduction

Numerical simulation analysis of thermal stress fields during solidification of steel casting

Thermal stress analysis and structural optimization of ladle nozzle based on finite element simulation

Thermal Stress Cracking of Slide-Gate Plates in Steel Continuous Casting

Optimization of V-Process for Cast-Iron Boiler Plate

Analysis of Temperature Stress in Bridges Considering Vertical and Transverse Temperature Gradient

Thermo-mechanical Stress and Fatigue Damage Analysis on Multi-Stage High Pressure Reducing Valve

An Investigation of the Temperature Distributions Inside A Spool Valve Owing to A Viscous Heating Effect

Numerical Study On Temperature Field And Spool Deformation Of Throttle Slide Valve With V-Notches

Thermal stress simulation considering mechanical interaction between casting and mold

Analysis of Thermomechanical Behavior in Continuous Bloom Casting Mold

Finite Element Thermal-Mechanical Coupled Analysis of Strand Bulging Deformation in Continuous Casting

Thermal Stress Analysis of the Solidification Process of Francis Turbine Band Casting

Analysis of Longitudinal Cracking and Mold Flux Optimization in High-Speed Continuous Casting of Hyper-Peritectic Steel Thin Slabs

Analysis and Control of the Slab Hot Ductility Behaviors Based on Nozzle Arrangement during Continuous Casting

Application of Modeling and Simulation of Thermal Stress in Solidification Process of a Heavy Steel Casting