Abstract:Computer-Aided Design (CAD) tools are extensively used throughout all of the steps in a VLSI design flow. The physical design domain is one of the three domains that are conceptually abstracted in representing a VLSI design flow. This research work focuses on three areas in VLSI physical design domain: clock tree design and buffer insertion, interconnect model order reduction and LVS verification. First, an optimal buffer insertion for clock delay and skew minimization algorithm is developed based on the theory that the minimal clock delay can be obtained by equalizing derivatives of a convex function, and the minimal clock skew can be achieved by equalizing delay functions of different source-to-sink paths. Experimental results show that the presented algorithm achieves both minimal delay and skew in real clock tree design. Further, an automatic clock tree design algorithm is developed for realizing the pre-specified clock arrival time requirements that often occur in an IP block based design environment. In this proposed strategy, planar clock routing and buffer insertion are carried out simultaneously to minimize clock delay and skew, and a full waveform simulation is applied to ensure the signal integrity necessary for high-speed VLSI design. Second, an efficient balanced truncation realization algorithm is presented for interconnect model order reduction. This algorithm shows that there is no need to solve the whole Lyapunov equation for controllability and observability grammians before obtaining approximation to their predominant spaces, and a linear order reduction algorithm can be achieved by extending the O(n) Krylov Subspace Oblique Projection method. Finally, a unique LVS methodology is proposed for the verification of a quad-core microprocessor designed with a triple-well 90-nm CMOS technology. Due to the IP reuse, the standard LVS flow is incapable of handling the additional design complexity in verifying the LVS for the chip designed with multiple power domains. This proposed LVS strategy consists of two phases. The first phase involves verifying LVS at the block level as well as the full-chip level. The second phase aims at verifying the integrity of the multi-power-domain power grid. The proposed LVS methodology was successfully verified by real silicon.

Optimization of Self-Hold Interface for Analog Cores by Virtual Digitization

Optimization Of Sample/Hold Circuit For High-Speed And High-Resolution Adcs

A novel research on mixed-signal SoC self-hold analog IP core test wrapper design

Research on Test Structure of Analog Cores in Mixed-Signal SoCs

A Fully Automated Large-Scale Addressable Test Chip Design with High Reliability

Test Planning for Mixed-Signal SOCs with Wrapped Analog Cores

Design for HW/SW Co-Testing Based on FPGA

Performance Parameter Testing for ADC and DAC IP Cores Without I/O Multiplexing in SoC Using Verigy 93000

A Case Study of Testing Strategy for AI SoC

An improved method for test chip design

A 10-bit 20-Msample/s 49mW CMOS pipelined A/D converter

Shem: A Hardware-Aware Optimization Framework for Analog Computing Systems

Re-Optimization Algorithm for SoC Wrapper-Chain Balance Using Mean-Value Approximation

Software- Based Self-Testing Methodology for Embedded Processor Cores

Optimization of integrated hall sensor

Joint testing scheme on mixed SoC

Digitized Synchronous Control Method for Synthetic Test

Algorithms and Methodology in Physical Domain Optimization for High-Performance Vlsi Design

A Robust Asynchronous Approach for Realizing Ultra-Low Power Digital Self-Adaptive VDD Scaling System

Analog Circuit Optimization System Based on Hybrid Evolutionary Algorithms

A behavior-oriented simulation tool for design and optimization of sigma-delta ADCs