Abstract:The main material of a type of multifunctional warhead is energy-containing material, which mainly relies on the projectile's own kinetic energy to hit the target plate to achieve the function of penetrating reinforced concrete, so it needs the bullet material to have high strength and be able to withstand the high overload when penetrating reinforced concrete. At present, the composite energy-containing material structure with Al, Zr, Ti, and other materials as PTFE-based reducing agents is the mainstream direction of research on high-strength energy-containing materials. LS-DYNA is used to establish a simulation model to simulate and analyze the tapping power. The relationship curve between material strength and attack depth is established and compared with the experimental data of traditional steel material attack ammunition to finally determine the strength limit of energy-containing material compared with traditional attack ammunition. The simulation results show that the composite energy-containing material multifunctional projectile can accomplish the tapping task of penetrating 1.2 m reinforced concrete under the premise of ensuring that the percentage of W powder is not higher than 80%. This study has a certain reference value for the selection of energy-containing materials for multifunctional warheads. For the low-velocity penetration below 400 m/s, the effect of frictional resistance of the head as well as the sidewall on the penetration depth can be ignored, but the overload curve when considering the sidewall friction is more realistic. Using a combination of experimental and theoretical methods, the influence of the projectile material on the mass erosion of high-speed kinetic energy projectiles was studied, and the Jones erosion model based on the thermal melting principle was improved. Based on the cavity expansion theory, the calculation method of the shape evolution of the bullet head was established. The comparison with the experimental results shows that the improved model is applicable to different types of soft and hard materials and can accurately calculate the mass erosion amount, erosion depth, and shape evolution of the bullet head.

Finite Element Simulation on Ogive-nosed Projectiles Penetrating Single and Multi-layered Concrete Targets

Investigation on the anti-penetration performance of the steel/nylon sandwich plate

Numerical simulation of the disk fragment impacting resistance of plate target

Numerical Simulation Of High-Speed Projectile Oblique Penetration Into The Concrete Target

Numerical Simulation of Rigid Projectiles Penetration into Concrete Targets with Different Warhead Shapes

Strain-rate-dependent Cohesive Zone Modelling of Charge Damage Behavior when a Projectile Penetrates Multilayered Targets

Simulation of ballistic performance of a two-layered structure of nanostructured metal and ceramic

Experimental and 3D Mesoscopic Numerical Simulation Study of Kinetic Projectile Penetrating into Concrete

ENGINEERING ANALYTICAL MODEL FOR OGIVE-NOSE PROJECTILES TO PENETRATE INTO SEMI-INFINITE REINFORCED CONCRETE TARGETS

Numerical Analysis of Deformation and Failure of Penetration into Concrete Target by Projectile

Numerical Simulation of Multifunctional Projectile Penetrating Reinforced Concrete Target Plate Based on Sensor Data Acquisition

Research on the factors influencing the process of prefabricated fragments penetrating finite thickness concrete

Evaluation of semi‐analytical model for rigid projectile penetration into concrete/metal targets

Experimental Studies on Kinetic Projectile's Direct Penetrations with Low-speed Against Reinforced Concrete Targets

Thick Plain Concrete Targets Subjected to High Speed Penetration of 30crmnsini2a Steel Projectiles: Tests and Analyses

Research on Oblique Penetration of Projectiles into Targets of Different Materials

A Dynamic Cavity Expansion Model for Rigid Projectile Penetration into Concrete considering the Compressibility and Nonlinear Constitutive Relations

Constitutive modelling of concrete material subjected to low-velocity projectile impact: insights into damage mechanism and target resistance

Penetration trajectory of rigid projectile in the heterogeneous meso-scale concrete target

Investigation on anti-penetration performance of reinforced concrete targets based on ANSYS/LS-DYNA

Study on Target Structure Equivalent of Kinetic Energy Projectile Penetrating Concrete Target