Abstract:The challenge of achieving micro kerf ( ) for high-frequency ( MHz) composites presents a substantial barrier to the progress of PMN–PT ( – ) transducers. The ultrafast laser offers a promising avenue for micro- and nanoscale manufacturing, yet the research on the intricate mechanisms underlying their interaction with PMN–PT remains limited. In this study, we proposed and validated a technique involving low-stress ultrafast laser micromachining for the production of high-performance PMN–PT composite array transducers. The optical properties were examined. The interaction mechanisms were explored using a 1.5-ps laser system. The microstructures and elements were comprehensively examined as a function of scanning settings, revealing that less affected regions could be achieved. Furthermore, the mechanical performance, including hardness, elasticity modulus, and stresses, was assessed, demonstrating the potential of achieving low stress during micromachining. Raman and piezoelectric force microscopic (PFM) studies provided evidence that high-performance PMN–PT could be attained postmicromachining. Drawing upon the aforementioned physical models, a prototype 30-MHz PMN–PT composite array transducer was developed to validate the efficacy of low-stress micromachining. The composite showed large electromechanical coupling (>0.72). The transducer exhibited an average center frequency of 29.76 MHz, an average −6-dB bandwidth (BW) of 90.5%, and a high peak-to-peak voltage of 746 ± 87 mV at 0-dB gain. We provided valuable insights into the complicated ablation mechanisms generated by ultrafast lasers, which are critical for determining optimal settings, as well as introducing more accessible approaches for producing high-performance PMN–PT composite transducers.

Micromachined High Frequency PMN-PT/Epoxy 1&#x2013;3 Composite Ultrasonic Annular Arrays

35mhz Pmn-Pt Single Crystal Annular Array Ultrasonic Transducer

A PMN-PT Micromachined 1–3 Composite Circular Array for IVUS

Low-Stress Ultrafast Laser Micromachining for High-Frequency PMN–PT/Epoxy Composite Transducers

Miniature Ultrasound Transducer Incorporating Sm-PMN-PT 1-3 Composite

Fabrication of Radial Array Transducers Using 1-3 Composite via a Bending and Superposition Technique

A PMN-PT Composite-Based Circular Array for Endoscopic Ultrasonic Imaging

Design and Fabrication of High-Frequency Piezoelectric Micromachined Ultrasonic Transducer Based on an AlN Thin Film

3D FEM Analysis of High-Frequency AlN-Based PMUT Arrays on Cavity SOI

Effect of Shared Cavity on Electromechanical Performance of Piezoelectric Based Micro-machined Ultrasonic Transducer Array.

Development of Broadband High-Frequency Piezoelectric Micromachined Ultrasonic Transducer Array

Research and Fabrication of High-Frequency Broadband and Omnidirectional Transmitting Transducer

Design and Fabrication of High-Performance Piezoelectric Micromachined Ultrasonic Transducers Based on Aluminum Nitride Thin Films

High Voltage Excitation And Nonlinear Transmission Of A 16 Mhz Aln-Based Piezoelectric Micro-Machined Ultrasonic Transducer

Design of Piezoelectric Ultrasonic Transducer Based on Doped PDMS

Fabrication Method of 2-Dimensional Piezoelectric Micromachined Ultrasonic Transducer Arrays

Design and Characterization of High-Density Ultrasonic Transducer Array

Performance and Crosstalk Evaluation of 2-D Array Piezoelectric Micromachined Ultrasonic Transducer with 3-D Finite Element Simulation

Fabrication Process and Performance Analysis of AlN Based Piezoelectric Micromachined Ultrasonic Transducer with a Suspended Structure.

Finite element method simulation, design, and fabrication of micromachined high-frequency piezoelectric composite with hexagonal pillars for intravascular ultrasound imaging

Demonstration of MHz piezoelectric micromachined ultrasonic transducers array and its potential application for biomedical treatment

Micromachined High Frequency PMN-PT/Epoxy 1&amp;#x2013;3 Composite Ultrasonic Annular Arrays