Abstract:Because deformed magnesium alloys with low density and desirable mechanical properties can save energy and reduce emissions, they are in considerable demand in industrial applications. However, due to their hcp crystal structure, magnesium alloys have a limited number of slip systems that can be activated at room temperature. At present, many deformed magnesium alloys still face the problems of insufficient formability and poor mechanical anisotropy at room temperature, which limit the development of secondary forming processes. Meanwhile, many reports have proven that regulating the texture of deformed magnesium alloys is an effective strategy to improve their formability. Therefore, this study primarily employs the neutron diffraction technology, combined with microscopic characterization methods such as SEM and EBSD, to systematically study the effects of the minor rare earth element Ce on the microstructure, bulk texture, and mechanical anisotropy of extruded Mg-0.3Al-0.2Ca-0.5Mn magnesium alloy sheet. The results show that as the Ce content increases, second-phase particles in the extruded magnesium alloy sheet gradually transform from Al8Mn5 to Ce-containing Al8Mn4Ce and Al11Ce3 particles and the number density of second-phase particles increases remarkably. The addition of 0.05%Ce (mass fraction) did not considerably improve the basal texture of the sheet. However, after the addition of 0.5%Ce, fiber texture components distributed along the transverse direction (TD) are substantially reduced while the texture of (0002) pole figure of the alloy changed from a bimodal basal texture to a bimodal nonbasal texture along the extrusion direction (ED). This nonbasal texture formation is mainly caused by larger Ce-containing second-phase particles (> 1 mu m) promoting the particle-stimulated nucleation effect and preferential growth of nonbasal-oriented recrystallized grains. Therefore, when 0.5%Ce is added, the basal texture of the alloy is remarkably optimized, so that the ratio of the tensile yield strength along TD to that along ED is close to 1, implying that the anisotropy of the extruded Mg-0.3Al-0.2Ca0.5Mn alloy has been substantially reduced by the minor addition of Ce element.

Effect of Ce on Microstructure and Mechanical Properties of Mg-Zn-Ce Magnesium Alloys

Effect of Ce Addition on Microstructure and Mechanical Properties of ZM21 Magnesium Alloys

Effects of Ce addition on microstructure and mechanical properties of Mg-6Zn-1Mn alloy

Effects of Ce on Microstructure of Semi-Continuously Cast Mg-1.5Zn-0.2Zr Magnesium Alloy Ingots

Effect of Ce on Microstructure and Deformation Performance of Mg-2Zn-Mn Alloy

Effect of Ce Microalloying on Microstructure and Mechanical Properties of Extruded Mg–10Gd–0.5Zr Alloy

Effect of Ce Addition on Modifying the Microstructure and Achieving a High Elongation with a Relatively High Strength of As-Extruded AZ80 Magnesium Alloy

Effect of 1% Ce Addition on Microstructures and Mechanical Properties of As-Cast Mg-3.8Zn-2.2Ca (wt.%) Magnesium Alloy

Effects of Cerium on the Microstructure and Mechanical Properties of Mg–20Zn–8Al Alloy

Effect of Micro-alloyed Ce on the Microstructure and Mechanical Properties of Mg-Gd-Zr Alloy

Microstructure evolution and mechanical properties of ZM71-xCe(x=0.5, 1.0, 2.0) wrought magnesium alloy

Effect of Rare Earth Element Ce on the Bulk Texture and Mechanical Anisotropy of As-Extruded Mg-0.3Al-0.2Ca-0.5Mn Alloy Sheets

Effect of Micro-Alloying Ca on Microstructure, Texture and Mechanical Properties of Mg–Zn–Y–Ce Alloys

Effect of cerium alloying on microstructure, texture and mechanical properties of magnesium during cold-rolling process

Effect of Ce and homogeneous annealing on microstructure and deformation performance of Mg-2 .0Zn-1 .0Mn alloy

Effect of Ce Addition on the Microstructure, Thermal Conductivity and Mechanical Properties of Mg–0.5Mn Alloys

Effect of Y and Ce Additions on Microstructure and Mechanical Properties of Mg–Zn–Zr Alloys

Effect of Cerium on Microstructures and Mechanical Properties of Az61 Wrought Magnesium Alloy

Effects of Cerium on As-Cast Microstructure and Mechanical Properties of Mg–3Sn–2Ca Magnesium Alloy

Influence of Ce content on the microstructures and tensile properties of Mg-1Gd-0.5Zn alloys

Effect of Ce Addition on Microstructure, Thermal Conductivity, and Mechanical Properties of As-Cast and As-Extruded Mg–3Sn Alloys