Abstract:Abstract Glucose oxidase based enzymatic biofuel cell is the promising technology for implantable medical devices’ power supply. It can open up opportunities for the long‐term implantation of the medical devices like pacemakers without the necessity for replacement of the batteries. Increasing of the cathode efficiency is one of the issues that should be solved before a practical application of biofuel cells. The high catalytic activity of the cathode provides a significant contribution to the efficiency of biofuel cells operation. The creation of cathodes of implantable biofuel cell with the increased power density could resolve the problem with a slow kinetics of the cathodic oxygen reduction reaction. It is especially urgent in the conditions of implantation in physiological fluids, where the oxygen concentration is relatively low. Enzymes application could be an optimal way to increase an efficiency of the cathodic reaction, but enzymes long‐time stability is still in question. Thus, non‐organic and synthetic organic catalysts are considered. In this study, a new type of a cathode for enzymatic biofuel cells is presented. This cathode combines two catalysts: inorganic with platinum nanoparticles (PtNPs) and organic in the form of poly(3,4‐ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) cross‐linked by poly(ethylene glycol) diglycidyl ether (PEGDE). The received electrodes were investigated by several electrochemical methods: cyclic voltammetry, chronopotentiometry and linear sweep voltammetry method on a rotating disk electrode. It was shown that the combination of PtNPs and PEDOT:PSS provides the maximum cathodic current, due to the fact that both catalysts contribute to the oxygen reduction reaction. The maximum cathodic current was 7.5 μA for an electrode containing 5 % PEGDE with PtNPs, heat‐treated for one hour at 120 °C. The electrodes without platinum nanoparticles were also investigated. This research showed that PEDOT:PSS provides a significant contribution to the overall catalytic effect demonstrated by the electrode proposed in the study. Scanning electron microscopy and X‐ray fluorescence analysis studies showed that the electrodes with combination of PtNPs and PEDOT:PSS were almost fully covered by catalysts.

An Enzymatic Biofuel Cell with Optimized Structure for Enhancing Dissolved Oxygen Concentration and Mass Transfer

Enhanced Performance of a Glucose/o(2) Biofuel Cell Assembled with Laccase-Covalently Immobilized Three-Dimensional Macroporous Gold Film-Based Biocathode and Bacterial Surface Displayed Glucose Dehydrogenase-Based Bioanode.

A Membraneless Starch/O2 Biofuel Cell Based on Bacterial Surface Regulable Displayed Sequential Enzymes of Glucoamylase and Glucose Dehydrogenase

Controllable Display of Sequential Enzymes on Yeast Surface with Enhanced Biocatalytic Activity Toward Efficient Enzymatic Biofuel Cells.

Bridging Biochemistry and Microengineering: Glucose Oxidation in Microfluidic Biofuel Cells with Carbon-MEMS and Conductive Polymers Electrodes

A Hybrid Biofuel Cell with High Power and Operational Stability Using Electron Transfer‐Intensified Mediators and Multi‐Interaction Assembly

Electrochemical properties of enzyme electrode covalently immobilized on a graphite oxide/cobalt hydroxide/chitosan composite mediator for biofuel cells

High-performance H2O2 paper fuel cell boosted via electrolyte toning and radical generation

Glucose-Oxygen Biofuel Cell with Biotic and Abiotic Catalysts: Experimental Research and Mathematical Modeling

A Hybrid Biofuel Cell with High Power and Operational Stability Using Electron Transfer‐Intensified Mediators and Multi‐Interaction Assembly (Adv. Energy Mater. 32/2024)

Live Microalgal Cells Modified by L‐cys/Au@carbon Dots/bilirubin Oxidase Layers for Enhanced Oxygen Reduction in a Membrane‐less Biofuel Cell

Pseudocapacitance behavior enables efficient and stable electrochemical energy conversion and storage in glucose/air enzymatic biofuel cells

Designing Porous Antifouling Interfaces for High‐Power Implantable Biofuel Cell

An "On-Off" Switchable Power Output of Enzymatic Biofuel Cell Controlled by Thermal-Sensitive Polymer

In-Depth Understanding of Oxygen Transfer in the Catalyst Layer of High-Temperature Proton Exchange Membrane Fuel Cells

Optimized Shelf-Stacked Paper Origami-Based Glucose Biofuel Cell with Immobilized Enzymes and a Mediator

Recent Advances in Enzyme‐based Biofuel Cells Using Glucose Fuel: Achieving High Power Output and Enhanced Operational Stability

Design of an Enzymatic Biofuel Cell with Large Power Output

A Miniature Glucose/O-2 Biofuel Cell With A High Tolerance Against Ascorbic Acid

Enhancing Conversion from Glucose to Electricity by Ferric Chloride in a Redox Flow Fuel Cell

A composite cathode of biofuel cell based on cross‐linked Poly(3,4‐ethylenedioxythiophene) polystyrene sulfonate and platinum nanoparticles