Abstract:Abstract Glucose oxidase based enzymatic biofuel cell is the promising technology for implantable medical devices’ power supply. It can open up opportunities for the long‐term implantation of the medical devices like pacemakers without the necessity for replacement of the batteries. Increasing of the cathode efficiency is one of the issues that should be solved before a practical application of biofuel cells. The high catalytic activity of the cathode provides a significant contribution to the efficiency of biofuel cells operation. The creation of cathodes of implantable biofuel cell with the increased power density could resolve the problem with a slow kinetics of the cathodic oxygen reduction reaction. It is especially urgent in the conditions of implantation in physiological fluids, where the oxygen concentration is relatively low. Enzymes application could be an optimal way to increase an efficiency of the cathodic reaction, but enzymes long‐time stability is still in question. Thus, non‐organic and synthetic organic catalysts are considered. In this study, a new type of a cathode for enzymatic biofuel cells is presented. This cathode combines two catalysts: inorganic with platinum nanoparticles (PtNPs) and organic in the form of poly(3,4‐ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) cross‐linked by poly(ethylene glycol) diglycidyl ether (PEGDE). The received electrodes were investigated by several electrochemical methods: cyclic voltammetry, chronopotentiometry and linear sweep voltammetry method on a rotating disk electrode. It was shown that the combination of PtNPs and PEDOT:PSS provides the maximum cathodic current, due to the fact that both catalysts contribute to the oxygen reduction reaction. The maximum cathodic current was 7.5 μA for an electrode containing 5 % PEGDE with PtNPs, heat‐treated for one hour at 120 °C. The electrodes without platinum nanoparticles were also investigated. This research showed that PEDOT:PSS provides a significant contribution to the overall catalytic effect demonstrated by the electrode proposed in the study. Scanning electron microscopy and X‐ray fluorescence analysis studies showed that the electrodes with combination of PtNPs and PEDOT:PSS were almost fully covered by catalysts.

Pseudocapacitance behavior enables efficient and stable electrochemical energy conversion and storage in glucose/air enzymatic biofuel cells

A Membraneless Starch/O2 Biofuel Cell Based on Bacterial Surface Regulable Displayed Sequential Enzymes of Glucoamylase and Glucose Dehydrogenase

Enhanced Performance of a Glucose/o(2) Biofuel Cell Assembled with Laccase-Covalently Immobilized Three-Dimensional Macroporous Gold Film-Based Biocathode and Bacterial Surface Displayed Glucose Dehydrogenase-Based Bioanode.

Microbial Surface Displayed Enzymes Based Biofuel Cell Utilizing Degradation Products of Lignocellulosic Biomass for Direct Electrical Energy.

Controllable Display of Sequential Enzymes on Yeast Surface with Enhanced Biocatalytic Activity Toward Efficient Enzymatic Biofuel Cells.

A Hybrid Biofuel Cell with High Power and Operational Stability Using Electron Transfer‐Intensified Mediators and Multi‐Interaction Assembly

Membrane/mediator-free rechargeable enzymatic biofuel cell utilizing graphene/single-wall carbon nanotube cogel electrodes

Thermal Annealing‐Enhanced Bioelectrocatalysis in Membraneless Glucose/Oxygen Biofuel Cell based on Hydrophilic Carbon Fibers

Unveiling the Glucose Oxidase‐Like and Catalase‐Like Activities of Highly Conjugated 3,4,9,10‐Perylenetetracarboxylic Dianhydride for Boosting Biofuel Cells

An "On-Off" Switchable Power Output of Enzymatic Biofuel Cell Controlled by Thermal-Sensitive Polymer

A composite cathode of biofuel cell based on cross‐linked Poly(3,4‐ethylenedioxythiophene) polystyrene sulfonate and platinum nanoparticles

Bridging Biochemistry and Microengineering: Glucose Oxidation in Microfluidic Biofuel Cells with Carbon-MEMS and Conductive Polymers Electrodes

Optimized Shelf-Stacked Paper Origami-Based Glucose Biofuel Cell with Immobilized Enzymes and a Mediator

Microfluidic Carbon cloth-based Enzymatic Glucose Biofuel Cell for Sustainably Powering a Microelectronic Circuit

Efficient Blood-toleration Enzymatic Biofuel Cell Via in Situ Protection of an Enzyme Catalyst

Separate immobilization of glucose oxidase and trehalase, and optimization of enzyme-carbon nanotube layers for the anode of enzymatic fuel cells utilizing trehalose

A membrane-less Glucose/O2 non-enzymatic fuel cell based on bimetallic Pd-Au nanostructure anode and air-breathing cathode: Towards micro-power applications at neutral pH

Fully solar-powered photoelectrochemical conversion for simultaneous energy storage and chemical sensing.

Green synthesis of ZnO nanoparticles decorated on polyindole functionalized-MCNTs and used as anode material for enzymatic biofuel cell applications

A needle-type biofuel cell using enzyme/mediator/carbon nanotube composite fibers for wearable electronics

Biomass sugar-powered enzymatic fuel cells based on a synthetic enzymatic pathway