Abstract:Enzymatic biofuel cells (EBFC) are promising sources of green energy owing to the benefits of using renewable biofuels, eco-friendly biocatalysts, and moderate operating conditions. In this study, a simple and effective EBFC was presented using an enzymatic composite material-based anode and a nonenzymatic bimetallic nanoparticle-based cathode respectively. The anode was constructed from a glassy carbon electrode (GCE) modified with a multi-walled carbon nanotube (MWCNT) and ferrocene (Fc) as a conductive layer coupled with the enzyme glucose oxidase (GOx) as a sensitive detection layer for glucose. A chitosan layer was also applied to the electrode as a protective layer to complete the composite anode. Chronoamperometry (CA) results show that the MWCNT-Fc-GOx/GCE electrode has a linear relationship between current and glucose concentration, which varied from 1 to 10 mM. The LOD and LOQ were calculated for anode as 0.26 mM and 0.87 mM glucose, respectively. Also the sensitivity of the proposed sensor was calculated as 25.71 μ A/mM. Moreover, the studies of some potential interferants show that there is no significant interference for anode in the determination of glucose except ascorbic acid (AA), uric acid (UA), and dopamine (DA). On the other hand, the cathode consisted of a disposable pencil graphite electrode (PGE) modified with platinum-palladium bimetallic nanoparticles (Nps) which exhibit excellent conductivity and electron transfer rate for the oxygen reduction reaction (ORR). The constructed EBFC was optimized and characterized using various electroanalytical techniques. The EBFC consisting of MWCNT-Fc-GOx/GCE anode and Pt-PdNps/PGE cathode exhibits an open circuit potential of 285.0 mV and a maximum power density of 32.25 µW cm-2 under optimized conditions. The results show that the proposed EBFC consisting of an enzymatic composite-based anode and bimetallic nanozyme-based cathode is a unique design and a promising candidate for detecting glucose while harvesting power from glucose-containing natural or artificial fluids.

An "On-Off" Switchable Power Output of Enzymatic Biofuel Cell Controlled by Thermal-Sensitive Polymer

A Membraneless Starch/O2 Biofuel Cell Based on Bacterial Surface Regulable Displayed Sequential Enzymes of Glucoamylase and Glucose Dehydrogenase

Controllable Display of Sequential Enzymes on Yeast Surface with Enhanced Biocatalytic Activity Toward Efficient Enzymatic Biofuel Cells.

Enhanced Performance of a Glucose/o(2) Biofuel Cell Assembled with Laccase-Covalently Immobilized Three-Dimensional Macroporous Gold Film-Based Biocathode and Bacterial Surface Displayed Glucose Dehydrogenase-Based Bioanode.

Microbial Surface Displayed Enzymes Based Biofuel Cell Utilizing Degradation Products of Lignocellulosic Biomass for Direct Electrical Energy.

Membrane/mediator-free rechargeable enzymatic biofuel cell utilizing graphene/single-wall carbon nanotube cogel electrodes

Thermal Annealing‐Enhanced Bioelectrocatalysis in Membraneless Glucose/Oxygen Biofuel Cell based on Hydrophilic Carbon Fibers

Microfluidic Carbon cloth-based Enzymatic Glucose Biofuel Cell for Sustainably Powering a Microelectronic Circuit

Temperature-Responsive Multifunctional Switchable Nanoreactors of Poly (N-Isopropylacrylamide)/sio2/lanthanide-polyoxometalates/au: Controlled On/Off Catalytic and Luminescent System

A Self-Powered Enzymatic Glucose Sensor Utilizing Bimetallic Nanoparticle Composites Modified Pencil Graphite Electrodes as Cathode

Optimized Shelf-Stacked Paper Origami-Based Glucose Biofuel Cell with Immobilized Enzymes and a Mediator

Transient, Implantable, Ultrathin Biofuel Cells Enabled by Laser-Induced Graphene and Gold Nanoparticles Composite

A wearable and flexible lactic-acid/O2 biofuel cell with an enhanced air-breathing biocathode

Pseudocapacitance behavior enables efficient and stable electrochemical energy conversion and storage in glucose/air enzymatic biofuel cells

A Hybrid Biofuel Cell with High Power and Operational Stability Using Electron Transfer‐Intensified Mediators and Multi‐Interaction Assembly

Efficient Blood-toleration Enzymatic Biofuel Cell Via in Situ Protection of an Enzyme Catalyst

A Miniature Glucose/O2 Biofuel Cell with a High Tolerance Against Ascorbic Acid

ON/OFF states of a microbial fuel cell controlled by an optical switching system

A low-cost biofuel cell with pH-dependent power output based on porous carbon as matrix.

A membrane-less Glucose/O2 non-enzymatic fuel cell based on bimetallic Pd-Au nanostructure anode and air-breathing cathode: Towards micro-power applications at neutral pH

Green synthesis of ZnO nanoparticles decorated on polyindole functionalized-MCNTs and used as anode material for enzymatic biofuel cell applications