Abstract:The mechanical properties of Czochralski (Cz) silicon wafers dictate fundamental limits on the fabrication of diverse electronic devices. Certain impurities with sufficiently high concentrations may affect the mechanical properties of Cz silicon. The underlying mechanisms for such influences have been being explored in the past decades. In this work, the effects of antimony (Sb)- and tin (Sn)-doping at 1018 cm−3 level on the mechanical properties of Czochralski (Cz) silicon have been comparatively investigated. Since Sb and Sn have quite close tetrahedral covalent radii in silicon, the lattice strains resulted from Sb- and Sn-doping and their consequent effects on the mechanical properties of silicon are approximately identical. In silicon, Sb is an electrically active impurity while Sn is a neutral one. Therefore, the present work can essentially reveal the role of electrical activity of Sb playing in the mechanical properties of Cz silicon. It is found that Sb-doped Cz (Sb-Cz) silicon possesses a slightly higher hardness than Sn-doped Cz (Sn-Cz) silicon. Moreover, the dislocation gliding at 500 or 600 °C in Sb-Cz silicon requires a much larger critical resolved shear stress than that in Sn-Cz silicon. At such two temperatures, Sb-Cz silicon remains to be n-type in electrical conduction. The aforementioned two results are believed to be ascribed to the resistance of dislocation motion by the Coulomb interaction between the positively charged Sb ions and the dislocations that are deep-level acceptors thus being negatively charged in Sb-Cz silicon. As the temperature is increased to 700 °C and above, the dislocation gliding in Sb-Cz silicon is not substantially different from that in Sn-Cz silicon. At such elevated temperatures, Sb-Cz silicon becomes intrinsic in electrical conduction like Sn-Cz silicon. In this context, there is no Coulomb interaction between Sb ions and dislocations anymore to impede the dislocation gliding in Sb-Cz silicon. In addition, it is found that the indentation fracture toughness of Sb-Cz is almost the same as that of Sn-Cz silicon. Actually, the fracture of silicon is essentially a cleavage process, to which the electrical activity of Sb is irrelevant.

Effects of Zn doping concentration on resistive switching characteristics in Ag /La 1− x Zn x MnO _3/p^+ -Si devices

The Transport Properties of La0.8zr0.2mno3 Film

The effect of doping Ag on the microstructure of La 2/3 Sr 1/3 MnO 3 films

Effects of Antimony- and Tin-Doping on the Mechanical Propertiesof Czochralski Silicon: Revealing the Role of Electrical Activity of Antimony

Bipolar resistive switching characteristics of PbZrO3/LaNiO3 heterostructure thin films prepared by a sol–gel process

Understanding and modulation of resistive switching behaviors in PbZr0.52Ti0.48O3/La0.67Sr0.33MnO3/Nb:SrTiO3 multilayer junctions

The Effects of Group-I Elements Co-Doping with Mn in ZnO Dilute Magnetic Semiconductor

Effect of Sc2O3 doping on the microstructure and electrical characteristics of ZnO linear resistors

Resistive Switching Behavior of Ag/La0.67Sr0.33MnO3/Pt Heterostructures

Transport Mechanisms in Zn, Ni and Mg Doped La1.85Sr0.15CuO4+δ Systems

Silicon Doping and N2 Annealing Effects on Zn3N2 Thin Film Transistors

Na Doping Concentration Tuned Conductivity of ZnO Films Via Pulsed Laser Deposition and Electroluminescence from ZnO Homojunction on Silicon Substrate

Influence of La and Mn Dopants on the Current-Voltage Characteristics of Bifeo3/Zno Heterojunction

Effects of Ag-induced acceptor defects on the band gap tuning and conductivity of Li:ZnO films

The synthesis and characterization of 1111-type diluted magnetic semiconductors (La1-xSrx)(Zn1-xTMx)AsO (TM = Mn, Fe, Co)

Resistive Switching and Its Modulating Ferromagnetism and Magnetoresistance of a ZnO-Co/SiO2-Co Film

Improved Resistive Switching Characteristics Of Ag-Doped Zro2 Films Fabricated By Sol-Gel Process

Insight into Ion Diffusion Dynamics/Mechanisms and Electronic Structure of Highly Conductive Sodium-Rich Na 3+ x La x Zr 2– x Si 2 PO 12 (0 ≤ x ≤ 0.5) Solid-State Electrolytes

J-V characteristics of sol-gel-prepared Zn2+ doped LiNbO3

Resistive switching behavior in ZnO:Ca thin films deposited by a pulsed laser deposition technique

Fabrication, Characterization, and the Rectifying Properties of the Interfacial Structural Controlled LaSrMnO–Si Heterojunctions