Abstract:In recent years, high-strength micro-alloyed cold heading steel has developed rapidly, mainly by adding Nb, V, Ti and other micro-alloying elements to the steel for grain refinement and precipitation strengthening, it is widely used in automobiles, bridges, construction machinery and other fields due to its excellent strength and toughness, fatigue resistance and corrosion resistance. However, the common quality defects in the process of continuous casting and hot rolling of such steels - transverse cracks on the surface and corners, are still one of the technical difficulties in the production of the world’s iron and steel enterprises. Therefore, it is of great scientific and engineering significance to deeply explore the evolution law of high temperature mechanical properties of niobium microalloyed cold heading steel, to analyze the common generation mechanism of surface transverse cracks and to propose general improvement measures. In this work, the high temperature thermoplastic properties of niobium microalloyed cold heading steel was studied by using Gleeble-3500 thermal simulator, combined with optical microscope (OM) and scanning electron microscope (SEM), the tensile fracture morphology and nearby microstructure were observed, and its high temperature plasticity mechanism was analyzed. The results show that the niobium microalloyed cold heading steel has two brittle temperature ranges: the first brittle zone is from the melting point to 1200°C, the temperature range of the third brittle zone is below 700°C, and the optimum plasticity zone is 700-1200°C. At 650°C, the fracture mode is ductile fracture and cleavage fracture; at 800°C, it is a typical cleavage-brittle fracture type; at 950°C, the fracture mode is dimple fracture, with good plasticity; at 1100°C, the particles become finer and the plastic deformation is more uniform. In order to avoid the occurrence of cracks in the continuous casting billet, the straightening temperature of the continuous casting billet should be higher than 700°C, it should be heated slowly in the early stage of heating, and the hot rolling temperature should be controlled at 700-1100°C.

Formability of Ni/Al Micro-laminated Composite Sheet

Microstructures and properties of in situ synthesis Ni/Ni-Al multilayer composites

Fabrication and mechanical properties of the NiAl sheet with a 3-dimensional network structure prepared by Ni nets and Al foils

The synthesis and mechanical property evaluation of Ni/Ni3Al microlaminates

Reaction Synthesis of Ni/Ni3Al Multilayer Composites Using Ni and Al Foils: High-temperature Tensile Properties and Deformation Behaviour

The microstructure and mechanical properties of reaction synthesized Ni-Al intermetallic sheets by pure Ni/Al foils with different thickness ratios

Effects of Ni Foil Thickness on the Microstructure and Tensile Properties of Reaction Synthesized Multilayer Composites

Interpenetrating microstructure and fracture mechanism of NiAl/TiC composites by pressureless melt infiltration

In-situ investigation of deformation behavior and fracture forms of Ti/Al/Mg/Al/Ti laminates

Modeling the Effect of Diffusion Layer and Interface on the Flow Stress for a Ni/Al Laminate Prepared by Vacuum Hot Pressing

Microstructures and Mechanical Properties of Laminated Structural Nb-Ti-Al Composites Fabricated by Laser Deposition

Microstructural evolution and mechanical properties of Ni/Al reactive nanolaminates with different NixAly intermetallic phases

Fabrication and Property of W/Tininb Shape Memory Alloy Laminated Composite

Characterization and Formability of Titanium/Aluminum Laminate Composites Fabricated by Hot Pressing

Microstructure, Texture and Tensile Properties of Nickel/Titanium Laminated Composites Produced by Cross Accumulative Roll Bonding Process

Fabrication of Al/Al-TiB 2 laminate composites via hot press sintering process: An insight into the mechanical properties and fracture behavior

Response Mechanism of Mechanical Behavior with Mg Plate Microstructure Evolution During Al/Mg/Al Composite Plate Rolled by hard Plate

Microstructure Evolution and Mechanical Properties of Ni3al/Al2o3 Composite During Self-Propagation High-Temperature Synthesis and Hot Extrusion

Microstructure and Mechanical Properties of Ti-Al-Ti-Ti2AlNb Laminated Composites Based on the Ductile-brittle Structure

Dynamic Mechanical Properties of Ti–Al3Ti–Al Laminated Composites: Experimental and Numerical Investigation

Study on high temperature mechanical properties of niobium microalloyed cold heading steel