Abstract:NiAl intermetallics is considered to be a potential high temperature structural material based on a high melting point, low density, high thermal conductivity, excellent oxidation and hot-corrosion resistance at elevated temperatures [1–4], but its high temperature strength is insufficient for the majority of actual applications. The tensile ductility and fracture toughness at ambient temperatures are often also unsatisfactory [5, 6]. The solid solution strengthening, precipitation strengthening, directional solidification and single crystal technique have been explored to improve its high temperature strength. Although significant progress has been achieved, the ambient tensile ductility and fracture toughness often deteriorate as a result. On the other hand, the ductility and toughness can also be improved by microalloying, macroalloying and plastic secondary phase additions, but this is at the expense of the strength [4–7]. In other words, it is very difficult to compromise its high temperature strength and ambient temperature ductility. This severely restricts its operating temperature and deteriorates its machinability. It is significant to explore novel fabricaturing techniques for NiAl intermetallic alloy to improve its comprehensive mechanical properties. Preparing intermetallic matrix composite is an effective method to produce engineering NiAl intermetallic alloy and to improve its high temperature strength and retain ambient temperature ductility simultaneously [8, 9]. Good ductility can be obtained through adequately alloying the intermetallic matrix while the strength is improved with the reinforcements. The casting, combustion synthesis, powder metallurgy and mechanical alloying are major methods for preparing NiAl intermetallic matrix composites. Nevertheless, in many cases, the mechanical bonding due to no interfacial reaction, or the brittle reactive products existing at the interface between matrix and reinforcement due to excessive interfacial reaction often result in weak interfacial bonding so that whole properties

Fabrication and mechanical properties of the NiAl sheet with a 3-dimensional network structure prepared by Ni nets and Al foils

Fabrication of Fully Dense Tial-Based Composite Sheets with A Novel Microlaminated Microstructure

The microstructure and mechanical properties of reaction synthesized Ni-Al intermetallic sheets by pure Ni/Al foils with different thickness ratios

Microstructure and high-temperature properties of NiAlV sheet prepared by magnetron-sputtering and foil-reaction

Microstructure and Mechanical Properties of Ni3Al and Ni3Al–1B Alloys Fabricated by SHS/HE

The synthesis and mechanical property evaluation of Ni/Ni3Al microlaminates

Microstructure and Mechanical Properties of Ni3Al Fabricated by Thermal Explosion and Hot Extrusion

Microstructural evolution and mechanical properties of Ni/Al reactive nanolaminates with different NixAly intermetallic phases

Microstructures and properties of in situ synthesis Ni/Ni-Al multilayer composites

Hot pack rolling the Ti 2 AlNb alloy prepared by SPS: Testing of the high-temperature properties of the alloy directly without the prior heat treatment

Direct Laser Fabricated in Situ TiC Particulate Reinforced Ni30Al20Fe Intermetallic Matrix Composite

Characterization of Ni3Al Alloy Fabricated by Thermal Explosion and Hot Extrusion Process

Fabrication of NiAl alloy hollow thin-walled component through hot gas forming of Ni/Al laminated tube and conversion process

Investigating the Influence of Al Contents on Microstructure and Mechanical Properties of Ni 3 Al Superalloy Fabricated by Twin Wire‐Based Direct Arc Energy Deposition

The Mechanical Properties of Intermetallic Ni50−xTi50Alx Alloys (X=6,7,8,9)

Influence of Ni Contents on Microstructure and Mechanical Performance of AlSi10Mg Alloy by Selective Laser Melting

Effects of Ni Foil Thickness on the Microstructure and Tensile Properties of Reaction Synthesized Multilayer Composites

Microstructure and mechanical properties of twin wire and arc additive manufactured Ni3Al-based alloy

Preparation of the close cross-section component of NiAl-based alloy by a novel combined sintering method

Microstructure Characteristics and Compressive Properties of NiAl-based Multiphase Alloy During Heat Treatments

Design, microstructure and thermal stability of a novel heat-resistant Al-Fe-Ni alloy manufactured by selective laser melting