Abstract:This paper reports a high-speed packaging for Silicon Mach-Zehnder modulators (MZMs). The radio frequency (RF) input port of the package is commercially available GPPO type. High-frequency ceramic substrate is designed to shorten the length of gold wire to suppress the RF attenuation. Gratings and single-mode fibers using inclined-surface coupling are used to realize low-loss and large tolerance coupling. In measurement, clear eye diagrams with ER of 10.1 dB and 7.6 dB were obtained at 25 Gb/s and 40 Gb/s modulations. Silicon photonics has become a hot research topic in the field of optoelectronics in recent years, since silicon–based optical device can achieve high density integration, low power consumption, low cost photonic devices, realize monolithic integration with electronic devices, and it is compatible with traditional CMOS processes [1]. Silicon electro-optic modulators which are key devices in optoelectronic information transmission and processing have got great developments in recent years. High speed OOK silicon modulators have been demonstrated [2-4]. The silicon modulator packaging has also been studied [5-6]. However, the operating speed of packaged silicon modulators still need to be improved. Our butterfly package for silicon modulator is illustrated in Figure 1. Two main designs were applied for high speed packaging: the modulator chip was designed with reverse PN mode, whose PN junction capacitance is smaller and the modulator electrode was carefully designed using CPW travelling-wave electrodes; GCPW transmission lines with metallic holes were adopted to fabricate the high-frequency ceramic substrates to make the high-speed electrical signal effective loading on the electrode of the MZM chip. Since micro-strip-like line (MSL) mode in GCPW line might exist, which usually cause energy coupling of CPW mode and prompt a microwave resonant of transmission response in high frequency range [7], we made metallic holes on a transmission line to suppress the microwave resonant [8-9]. Grating coupler and single-mode fiber with inclined-surface are used in optical coupling. The advantages of this optical coupling method is larger misalignment tolerance and cheap cleaved fiber packaging. Nickel metal tube is installed close to the inclined-surface of single-mode fiber, the position and angle of the optical fiber is adjusted by special fixture clamping nickel metal tube and adjusting the special fixture. Assuming the optical fiber is parallel to the chip surface, there is a relation of θ=2*φ-90o. We choose the φ=51 deg. as our grating incidence angle is 12 degree. Eye-diagram measurements were carried to demonstrate the high-speed operation of the packaged modules. Experimental results were presented in Fig. 4(a) and 4(b). Clear eye diagrams with ERs of 10.1 dB and 7.6 dB were obtained at 25 Gb/s and 40 Gb/s modulation speed. By improving the welding between the pin of GPPO connector and ceramic substrates, further reducing the length of gold wires from the ceramic substrates to the modulator pads, the speed of the packaged MZM module could be higher.

A 67 GHz Silicon Slow Light Modulator Using Slow Wave Electrode for Velocity Matching

High-Performance Electro-Optic Modulator on Silicon Nitride Platform with Heterogeneous Integration of Lithium Niobate

Electro-Optic Silicon Modulator With Horizontal Photonic Crystal Slot Slab

High-speed Silicon Modulators for the 2 Μm Wavelength Band

Slow-light Silicon Modulator with 110-Ghz Bandwidth.

Ultracompact Electrooptic Silicon Modulator With Horizontal Photonic Crystal Slotted Slab

Ultra-compact Silicon Modulator with 110 GHz Bandwidth.

Analysis of Electrooptic Modulator With 1-D Slotted Photonic Crystal Nanobeam Cavity

Slow light silicon modulator beyond 110 GHz bandwidth

High-speed packaging for silicon modulator

Fast Thermo-Optical Modulators with Doped-Silicon Heaters Operating at 2 Μm.

A Quasi-Matching Scheme for Arbitrary Group Velocity Match in Electro-Optic Modulation

Optical modulation and detection based on a PN junction embedded silicon waveguide

30 Gbps high optical bandwidth silicon modulator

High speed silicon Mach-Zehnder modulator based on interleaved PN junctions.

Design and Electro-Optical Co-Optimization of High-Speed Travelling Wave Silicon-Organic Hybrid Modulators

High-speed silicon modulator based on cascaded microring resonators.

High-speed, low-loss silicon Mach-Zehnder modulators with doping optimization.

Integrated lithium niobate intensity modulator on a silicon handle with slow-wave electrodes

High-speed Mid-infrared Silicon-based Electro-optic Modulator at 2 Μm

A Wideband Electro-Optic Modulator Based on Long Range Surface Plasmon Resonances