Abstract:Using large-scale industrial production, such as roll-to-roll (R2R) solution printing technology, to achieve lab-to-manufacturing translation should be an inevitable process for the commercialization of organic solar cells (OSCs). Optimizing the charge transport channel to improve the charge carrier transport and suppress the charge carrier recombination in the thick active layer plays a key role in constructing efficient thick-film OSCs. Therefore, exploring the design methods of efficient and thickness-insensitive photovoltaic materials is of great importance for fabricating thick-film OSCs. In this work, we fabricated a series of all-small-molecule organic solar cells (ASM-OSCs) with varied active layer thicknesses using PC71BM as the acceptor and DRTB-T-C2 (C2) and DRTB-T-C4 (C4) with different molecular orientations as donors. Although donor compounds possess very similar absorption properties and energy levels due to the identical conjugated structures, there are considerable differences in the thickness tolerability of ASM-OSCs. With the film thickness increasing from 100 to 300 nm, the power conversion efficiencies (PCEs) of C4:PC71BM-based OSCs slightly decreased from 7.45 to 7.09%, while the PCEs of C2:PC71BM-based devices dramatically reduced from 6.99 to 5.61%. Higher face-on ratios of the C4:PC71BM blend film give an optimized charge transport channel as supported by the increased and balanced hole and electron mobilities and reduced charge recombination in the thick active layer, and an optimal PCE of 7.71% is achieved in C4:PC71BM-based devices with an active layer thickness of 230 nm. This work demonstrates that modulating the molecular orientation of photovoltaic materials via subtle side-chain tuning is a simple and effective method to optimize charge transport channels and thus attain thick-film OSCs. To the best of our knowledge, PCEs over 7% are the highest values so far observed from a thick-film ASM-OSC using a wide-band-gap (2.0 eV) small-molecule donor, making it potential in constructing highly efficient multijunction devices.

P-doped All-Small-molecule Organic Solar Cells with Power Conversion Efficiency of 17.73%

Hydrogen Bond‐Induced Cathode Engineering Enables Binary All‐Small‐Molecule Organic Solar Cells with 15.88% Efficiency and Enhanced Thermostability

All‐Small‐Molecule Organic Solar Cells with Efficiency Approaching 16% and FF over 80%

Porphyrin-based donor with asymmetric ending groups enables 16.31% efficiency for ternary all-small-molecule organic solar cells

Achieving 10% efficiency in non-fullerene all-small-molecule organic solar cells without extra treatments

All-Small-Molecule Nonfullerene Organic Solar Cells with High Fill Factor and High Efficiency over 10%

High‐Performance All‐Small‐Molecule Organic Solar Cells Enabled by Regio‐Isomerization of Noncovalently Conformational Locks

9.73% Efficiency Nonfullerene All Organic Small Molecule Solar Cells with Absorption-Complementary Donor and Acceptor.

17% efficiency all-small-molecule organic solar cells enabled by nanoscale phase separation with a hierarchical branched structure

Self‐Assembled Molecules with Asymmetric Backbone for Highly Stable Binary Organic Solar Cells with 19.7% Efficiency

Rational control of sequential morphology evolution and vertical distribution toward 17.18% efficiency all-small-molecule organic solar cells

Efficient Organic Solar Cells Based on Low-Cost Pentacyclic Fused-Ring Small Molecule Acceptors with a Fill Factor over 80%

Efficient Large Area All‐Small‐Molecule Organic Solar Cells Fabricated by Slot‐Die Coating with Nonhalogen Solvent

Deciphering the Role of Side‐Chain Engineering and Solvent Vapor Annealing for Binary All‐Small‐Molecule Organic Solar Cells

Modulation of Alkyl Chain Length on the Thiazole Side Group Enables Over 17% Efficiency in All‐Small‐Molecule Organic Solar Cells

High Performance As-Cast Organic Solar Cells Enabled by a Refined Double-Fibril Network Morphology and Improved Dielectric Constant of Active Layer

Over 12% Efficiency Nonfullerene All-Small-Molecule Organic Solar Cells with Sequentially Evolved Multilength Scale Morphologies.

High-efficiency Organic Solar Cells from Low-Cost Pentacyclic Fused-Ring Electron Acceptors Via Crystal Engineering

Optimized Charge Transport Channel Enables Thick-Film All-Small-Molecule Organic Solar Cells

Recent Progress in All‐Small‐Molecule Organic Solar Cells

Design of All-Small-Molecule Organic Solar Cells Approaching 14% Efficiency via Isometric Terminal Alkyl Chain Engineering