Abstract:Many $\text{IoT}$ applications demand ADCs with high resolution, medium bandwidth, and good energy efficiency. Lately, the incremental ADC is drawing rising attention by favoring system integration with its easy multiplexing and simple digital filtering. By combining a low-power SAR with a low-distortion $\Delta\Sigma$ modulator, the zoom architecture achieves high energy efficiency and high resolution simultaneously [1–2]. However, the conventional zoom ADC can only convert quasi-static signals, since the two stages operate sequentially, and its $\Delta\Sigma$ conversion operates at a slow speed. The dynamic zoom architecture performs coarse and fine conversions concurrently, thus being able to convert varying inputs [3–4]. Yet, limited by the low quantization level of the fine $\Delta\Sigma \mathrm{M}$, it requires a large OSR for the targeted resolution (e.g., 282.25 in [3] and 87.5 in [4]), which restricts the input bandwidth to several tens of $\text{kHz}$, Moreover, its loop filter relies on charge transfer, where each conversion requires dedicated sampling for its residue generation. As a result, in addition to the limited input bandwidth, the largely repeated sampling operation incurs extra power and design challenge for input drivers. The CT zoom architecture features easy driving while still requiring a large conversion cycle of 8192 in [5]. Recently, the emerging noise-shaping (NS) SAR ADC employs the efficient SAR for the multi-bit quantizer, significantly reducing conversion cycles [6–7]. However, without the initial coarse quantization, high loop filter orders are usually required for hig h -resolution applications, raising significant hardware cost and design complexity.

An Information-Aware Adaptive Data Acquisition System Using Level-Crossing ADC with Signal-Dependent Full Scale and Adaptive Resolution for IoT Applications.

A 10-Bit 250-KS/s 1.24-uW SAR ADC for IoT Sensors with Energy-Efficient Comparator.

A 16-Bit 2.5-Ms/s SAR ADC with On-Chip Foreground Calibration

A Low-power High-resolution Band-pass Sigma-delta ADC for Accelerometer Applications

A 77.2-Db SNDR SAR ADC with a Segmented Comparator Logic Based on Compensatory SA Latch for FIA

A 62.2db SNDR Event-Driven Level-Crossing ADC with SAR-Assisted Delay Compensation Loop for Time-Sparse Biomedical Signal Acquisition.

A 0.49–4.34 μW LC-SAR Hybrid ADC with a 10.85-Bit ENOB and 20 KS/s Bandwidth

A 1V 5-bits Low Power Level Crossing ADC with OFF state in idle time for bio-medical applications in 0.18um CMOS

A 61-nW Level-Crossing ADC With Adaptive Sampling for Biomedical Applications

A 148-Nw Reconfigurable Event-Driven Intelligent Wake-Up System for AIoT Nodes Using an Asynchronous Pulse-Based Feature Extractor and a Convolutional Neural Network

Fully Digital Second-order Level-crossing Sampling ADC for Data Saving in Sensing Sparse Signals

A 1-V 560-Nw SAR ADC with 90-Db SNDR for IoT Sensing Applications

A 1.2V 62.2dB SNDR SAR-Assisted Event-Driven Clockless Level-Crossing ADC for Time-Sparse Signal Acquisition

A Software-Defined Always-On System With 57-75-nW Wake-Up Function Using Asynchronous Clock-Free Pipelined Event-Driven Architecture and Time-Shielding Level-Crossing ADC

A 10-Bit 16-Ms/s Ultra Low Power SAR ADC for IoT Applications

Power Efficiency Comparison of Event-Driven and Fixed-Rate Signal Conversion and Compression for Biomedical Applications

10.6 A 150Khz-Bw 15-ENOB Incremental Zoom ADC with Skipped Sampling and Single Buffer Embedded Noise-Shaping SAR Quantizer

A bridged‐switch energy‐efficient switching scheme for SAR ADCs with 2× input range

A 0.014mm2 10Khz-Bw Zoom-Incremental-Counting ADC Achieving 103db SNDR and 100db Full-Scale CMRR

An 8-Bit 166nw 11.25 Ks/s 0.18um Two-Step-sar ADC for RFID Applications Using Novel DAC Architecture

An 88 dB SNDR 100 kHz BW Sturdy MASH Delta-Sigma Modulator Using Self-Cascoded Floating Inverter Amplifiers